summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/gpio
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2021-05-17 13:27:45 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2021-05-17 16:23:06 +0200
commita5a4c1d5a3c4f89059fb612b5786ec8b61b959f1 (patch)
treefe87198c6cc02e54d3131d087d2b9f7c3e96c689 /dts/Bindings/gpio
parentba9de18c5f211678f5d0f67a0758c632ab774cca (diff)
downloadbarebox-a5a4c1d5a3c4f89059fb612b5786ec8b61b959f1.tar.gz
barebox-a5a4c1d5a3c4f89059fb612b5786ec8b61b959f1.tar.xz
dts: update to v5.13-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/gpio')
-rw-r--r--dts/Bindings/gpio/brcm,bcm6345-gpio.txt46
-rw-r--r--dts/Bindings/gpio/brcm,bcm6345-gpio.yaml86
-rw-r--r--dts/Bindings/gpio/fairchild,74hc595.yaml77
-rw-r--r--dts/Bindings/gpio/gpio-74x164.txt27
-rw-r--r--dts/Bindings/gpio/realtek,otto-gpio.yaml78
-rw-r--r--dts/Bindings/gpio/rockchip,gpio-bank.yaml82
-rw-r--r--dts/Bindings/gpio/socionext,uniphier-gpio.yaml3
7 files changed, 324 insertions, 75 deletions
diff --git a/dts/Bindings/gpio/brcm,bcm6345-gpio.txt b/dts/Bindings/gpio/brcm,bcm6345-gpio.txt
deleted file mode 100644
index e7853143fa..0000000000
--- a/dts/Bindings/gpio/brcm,bcm6345-gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers.
-
-These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
-are the only ones which don't need a pinctrl driver.
-BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
-and/or written, and the direction changed from input to output.
-BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
-and/or written, and the direction changed from input to output.
-
-Required properties:
- - compatible: should be "brcm,bcm6345-gpio"
- - reg-names: must contain
- "dat" - data register
- "dirout" - direction (output) register
- - reg: address + size pairs describing the GPIO register sets;
- order must correspond with the order of entries in reg-names
- - #gpio-cells: must be set to 2. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
- - gpio-controller: Marks the device node as a gpio controller.
-
-Optional properties:
- - native-endian: use native endian memory.
-
-Examples:
- - BCM6338:
- gpio: gpio-controller@fffe0407 {
- compatible = "brcm,bcm6345-gpio";
- reg-names = "dirout", "dat";
- reg = <0xfffe0407 1>, <0xfffe040f 1>;
-
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- - BCM6345:
- gpio: gpio-controller@fffe0406 {
- compatible = "brcm,bcm6345-gpio";
- reg-names = "dirout", "dat";
- reg = <0xfffe0406 2>, <0xfffe040a 2>;
- native-endian;
-
- #gpio-cells = <2>;
- gpio-controller;
- };
diff --git a/dts/Bindings/gpio/brcm,bcm6345-gpio.yaml b/dts/Bindings/gpio/brcm,bcm6345-gpio.yaml
new file mode 100644
index 0000000000..4d69f79df8
--- /dev/null
+++ b/dts/Bindings/gpio/brcm,bcm6345-gpio.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6345 GPIO controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers.
+
+ These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
+ are the only ones which don't need a pinctrl driver.
+
+ BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
+ and/or written, and the direction changed from input to output.
+ BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
+ and/or written, and the direction changed from input to output.
+ BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data
+ and dirout registers, where GPIO state can be read and/or written, and the
+ direction changed from input to output.
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm6318-gpio
+ - brcm,bcm6328-gpio
+ - brcm,bcm6345-gpio
+ - brcm,bcm6358-gpio
+ - brcm,bcm6362-gpio
+ - brcm,bcm6368-gpio
+ - brcm,bcm63268-gpio
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ native-endian: true
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: dirout
+ - const: dat
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - gpio-controller
+ - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@fffe0406 {
+ compatible = "brcm,bcm6345-gpio";
+ reg-names = "dirout", "dat";
+ reg = <0xfffe0406 2>, <0xfffe040a 2>;
+ native-endian;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ - |
+ gpio@0 {
+ compatible = "brcm,bcm63268-gpio";
+ reg-names = "dirout", "dat";
+ reg = <0x0 0x8>, <0x8 0x8>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 52>;
+ #gpio-cells = <2>;
+ };
diff --git a/dts/Bindings/gpio/fairchild,74hc595.yaml b/dts/Bindings/gpio/fairchild,74hc595.yaml
new file mode 100644
index 0000000000..5fe19fa5f6
--- /dev/null
+++ b/dts/Bindings/gpio/fairchild,74hc595.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fairchild,74hc595.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic 8-bit shift register
+
+maintainers:
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - fairchild,74hc595
+ - nxp,74lvc594
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The second cell is only used to specify the GPIO polarity.
+ const: 2
+
+ registers-number:
+ description: Number of daisy-chained shift registers
+
+ enable-gpios:
+ description: GPIO connected to the OE (Output Enable) pin.
+ maxItems: 1
+
+ spi-max-frequency: true
+
+patternProperties:
+ "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+ type: object
+
+ properties:
+ gpio-hog: true
+ gpios: true
+ output-high: true
+ output-low: true
+ line-name: true
+
+ required:
+ - gpio-hog
+ - gpios
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - registers-number
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio5: gpio5@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <4>;
+ spi-max-frequency = <100000>;
+ };
+ };
diff --git a/dts/Bindings/gpio/gpio-74x164.txt b/dts/Bindings/gpio/gpio-74x164.txt
deleted file mode 100644
index 2a97553d8d..0000000000
--- a/dts/Bindings/gpio/gpio-74x164.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Generic 8-bits shift register GPIO driver
-
-Required properties:
-- compatible: Should contain one of the following:
- "fairchild,74hc595"
- "nxp,74lvc594"
-- reg : chip select number
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-- registers-number: Number of daisy-chained shift registers
-
-Optional properties:
-- enable-gpios: GPIO connected to the OE (Output Enable) pin.
-
-Example:
-
-gpio5: gpio5@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <4>;
- spi-max-frequency = <100000>;
-};
diff --git a/dts/Bindings/gpio/realtek,otto-gpio.yaml b/dts/Bindings/gpio/realtek,otto-gpio.yaml
new file mode 100644
index 0000000000..100f20cebd
--- /dev/null
+++ b/dts/Bindings/gpio/realtek,otto-gpio.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/realtek,otto-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek Otto GPIO controller
+
+maintainers:
+ - Sander Vanheule <sander@svanheule.net>
+ - Bert Vermeulen <bert@biot.com>
+
+description: |
+ Realtek's GPIO controller on their MIPS switch SoCs (Otto platform) consists
+ of two banks of 32 GPIOs. These GPIOs can generate edge-triggered interrupts.
+ Each bank's interrupts are cascased into one interrupt line on the parent
+ interrupt controller, if provided.
+ This binding allows defining a single bank in the devicetree. The interrupt
+ controller is not supported on the fallback compatible name, which only
+ allows for GPIO port use.
+
+properties:
+ $nodename:
+ pattern: "^gpio@[0-9a-f]+$"
+
+ compatible:
+ items:
+ - enum:
+ - realtek,rtl8380-gpio
+ - realtek,rtl8390-gpio
+ - const: realtek,otto-gpio
+
+ reg:
+ maxItems: 1
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+ ngpios:
+ minimum: 1
+ maximum: 32
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#gpio-cells"
+ - gpio-controller
+
+additionalProperties: false
+
+dependencies:
+ interrupt-controller: [ interrupts ]
+
+examples:
+ - |
+ gpio@3500 {
+ compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
+ reg = <0x3500 0x1c>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <24>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&rtlintc>;
+ interrupts = <23>;
+ };
+
+...
diff --git a/dts/Bindings/gpio/rockchip,gpio-bank.yaml b/dts/Bindings/gpio/rockchip,gpio-bank.yaml
new file mode 100644
index 0000000000..d993e002ce
--- /dev/null
+++ b/dts/Bindings/gpio/rockchip,gpio-bank.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/rockchip,gpio-bank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip GPIO bank
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,gpio-bank
+ - rockchip,rk3188-gpio-bank0
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - gpio-controller
+ - "#gpio-cells"
+ - interrupt-controller
+ - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl: pinctrl {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio@2000a000 {
+ compatible = "rockchip,rk3188-gpio-bank0";
+ reg = <0x2000a000 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_gates8 9>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@2003c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2003c000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_gates8 10>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
diff --git a/dts/Bindings/gpio/socionext,uniphier-gpio.yaml b/dts/Bindings/gpio/socionext,uniphier-gpio.yaml
index 1a54db04f2..bcafa494ed 100644
--- a/dts/Bindings/gpio/socionext,uniphier-gpio.yaml
+++ b/dts/Bindings/gpio/socionext,uniphier-gpio.yaml
@@ -43,8 +43,7 @@ properties:
gpio-ranges: true
- gpio-ranges-group-names:
- $ref: /schemas/types.yaml#/definitions/string-array
+ gpio-ranges-group-names: true
socionext,interrupt-ranges:
description: |