dts: update to v5.8-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 73 deletions

diff --git a/dts/Bindings/i2c/i2c-designware.txt b/dts/Bindings/i2c/i2c-designware.txt
deleted file mode 100644
index 08be4d3846..0000000000
--- a/dts/Bindings/i2c/i2c-designware.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Synopsys DesignWare I2C
-
-Required properties :
-
- - compatible : should be "snps,designware-i2c"
-                or "mscc,ocelot-i2c" with "snps,designware-i2c" for fallback
- - reg : Offset and length of the register set for the device
- - interrupts : <IRQ> where IRQ is the interrupt number.
- - clocks : phandles for the clocks, see the description of clock-names below.
-   The phandle for the "ic_clk" clock is required. The phandle for the "pclk"
-   clock is optional. If a single clock is specified but no clock-name, it is
-   the "ic_clk" clock. If both clocks are listed, the "ic_clk" must be first.
-
-Recommended properties :
-
- - clock-frequency : desired I2C bus clock frequency in Hz.
-
-Optional properties :
-
- - clock-names : Contains the names of the clocks:
-    "ic_clk", for the core clock used to generate the external I2C clock.
-    "pclk", the interface clock, required for register access.
-
- - reg : for "mscc,ocelot-i2c", a second register set to configure the SDA hold
-   time, named ICPU_CFG:TWI_DELAY in the datasheet.
-
- - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
-   This option is only supported in hardware blocks version 1.11a or newer and
-   on Microsemi SoCs ("mscc,ocelot-i2c" compatible).
-
- - i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds.
-   This value which is by default 300ns is used to compute the tLOW period.
-
- - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
-   This value which is by default 300ns is used to compute the tHIGH period.
-
-Examples :
-
-	i2c@f0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,designware-i2c";
-		reg = <0xf0000 0x1000>;
-		interrupts = <11>;
-		clock-frequency = <400000>;
-	};
-
-	i2c@1120000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,designware-i2c";
-		reg = <0x1120000 0x1000>;
-		interrupt-parent = <&ictl>;
-		interrupts = <12 1>;
-		clock-frequency = <400000>;
-		i2c-sda-hold-time-ns = <300>;
-		i2c-sda-falling-time-ns = <300>;
-		i2c-scl-falling-time-ns = <300>;
-	};
-
-	i2c@1120000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x2000 0x100>;
-		clock-frequency = <400000>;
-		clocks = <&i2cclk>;
-		interrupts = <0>;
-
-		eeprom@64 {
-			compatible = "linux,slave-24c02";
-			reg = <0x40000064>;
-		};
-	};