dts: update to v5.8-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

18 files changed, 577 insertions, 204 deletions

diff --git a/dts/Bindings/i2c/brcm,bcm2835-i2c.txt b/dts/Bindings/i2c/brcm,bcm2835-i2c.txt
index c9a6587fe4..a8a35df419 100644
--- a/dts/Bindings/i2c/brcm,bcm2835-i2c.txt
+++ b/dts/Bindings/i2c/brcm,bcm2835-i2c.txt
@@ -13,7 +13,7 @@ Recommended properties:
 
 Example:
 
-i2c@20205000 {
+i2c@7e205000 {
 	compatible = "brcm,bcm2835-i2c";
 	reg = <0x7e205000 0x1000>;
 	interrupts = <2 21>;
diff --git a/dts/Bindings/i2c/cdns,i2c-r1p10.yaml b/dts/Bindings/i2c/cdns,i2c-r1p10.yaml
new file mode 100644
index 0000000000..dc0952f378
--- /dev/null
+++ b/dts/Bindings/i2c/cdns,i2c-r1p10.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence I2C controller Device Tree Bindings
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cdns,i2c-r1p10 # cadence i2c controller version 1.0
+      - cdns,i2c-r1p14 # cadence i2c controller version 1.4
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 400000
+    description: |
+      Desired operating frequency, in Hz, of the bus.
+
+  clock-name:
+    const: pclk
+    description: |
+      Input clock name.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c@e0004000 {
+        compatible = "cdns,i2c-r1p10";
+        clocks = <&clkc 38>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        reg = <0xe0004000 0x1000>;
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/dts/Bindings/i2c/i2c-cadence.txt b/dts/Bindings/i2c/i2c-cadence.txt
deleted file mode 100644
index ebaa90c58c..0000000000
--- a/dts/Bindings/i2c/i2c-cadence.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Binding for the Cadence I2C controller
-
-Required properties:
-  - reg: Physical base address and size of the controller's register area.
-  - compatible: Should contain one of:
-		* "cdns,i2c-r1p10"
-		Note:	Use this when cadence i2c controller version 1.0 is used.
-		* "cdns,i2c-r1p14"
-		Note:	Use this when cadence i2c controller version 1.4 is used.
-  - clocks: Input clock specifier. Refer to common clock bindings.
-  - interrupts: Interrupt specifier. Refer to interrupt bindings.
-  - #address-cells: Should be 1.
-  - #size-cells: Should be 0.
-
-Optional properties:
-  - clock-frequency: Desired operating frequency, in Hz, of the bus.
-  - clock-names: Input clock name, should be 'pclk'.
-
-Example:
-	i2c@e0004000 {
-		compatible = "cdns,i2c-r1p10";
-		clocks = <&clkc 38>;
-		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-		reg = <0xe0004000 0x1000>;
-		clock-frequency = <400000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/dts/Bindings/i2c/i2c-designware.txt b/dts/Bindings/i2c/i2c-designware.txt
deleted file mode 100644
index 08be4d3846..0000000000
--- a/dts/Bindings/i2c/i2c-designware.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Synopsys DesignWare I2C
-
-Required properties :
-
- - compatible : should be "snps,designware-i2c"
-                or "mscc,ocelot-i2c" with "snps,designware-i2c" for fallback
- - reg : Offset and length of the register set for the device
- - interrupts : <IRQ> where IRQ is the interrupt number.
- - clocks : phandles for the clocks, see the description of clock-names below.
-   The phandle for the "ic_clk" clock is required. The phandle for the "pclk"
-   clock is optional. If a single clock is specified but no clock-name, it is
-   the "ic_clk" clock. If both clocks are listed, the "ic_clk" must be first.
-
-Recommended properties :
-
- - clock-frequency : desired I2C bus clock frequency in Hz.
-
-Optional properties :
-
- - clock-names : Contains the names of the clocks:
-    "ic_clk", for the core clock used to generate the external I2C clock.
-    "pclk", the interface clock, required for register access.
-
- - reg : for "mscc,ocelot-i2c", a second register set to configure the SDA hold
-   time, named ICPU_CFG:TWI_DELAY in the datasheet.
-
- - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
-   This option is only supported in hardware blocks version 1.11a or newer and
-   on Microsemi SoCs ("mscc,ocelot-i2c" compatible).
-
- - i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds.
-   This value which is by default 300ns is used to compute the tLOW period.
-
- - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
-   This value which is by default 300ns is used to compute the tHIGH period.
-
-Examples :
-
-	i2c@f0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,designware-i2c";
-		reg = <0xf0000 0x1000>;
-		interrupts = <11>;
-		clock-frequency = <400000>;
-	};
-
-	i2c@1120000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,designware-i2c";
-		reg = <0x1120000 0x1000>;
-		interrupt-parent = <&ictl>;
-		interrupts = <12 1>;
-		clock-frequency = <400000>;
-		i2c-sda-hold-time-ns = <300>;
-		i2c-sda-falling-time-ns = <300>;
-		i2c-scl-falling-time-ns = <300>;
-	};
-
-	i2c@1120000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x2000 0x100>;
-		clock-frequency = <400000>;
-		clocks = <&i2cclk>;
-		interrupts = <0>;
-
-		eeprom@64 {
-			compatible = "linux,slave-24c02";
-			reg = <0x40000064>;
-		};
-	};
diff --git a/dts/Bindings/i2c/i2c-jz4780.txt b/dts/Bindings/i2c/i2c-jz4780.txt
deleted file mode 100644
index d229eff5ca..0000000000
--- a/dts/Bindings/i2c/i2c-jz4780.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Ingenic JZ4780 I2C Bus controller
-
-Required properties:
-- compatible: should be one of the following:
-  - "ingenic,jz4780-i2c" for the JZ4780
-  - "ingenic,x1000-i2c" for the X1000
-- reg: Should contain the address & size of the I2C controller registers.
-- interrupts: Should specify the interrupt provided by parent.
-- clocks: Should contain a single clock specifier for the JZ4780 I2C clock.
-- clock-frequency: desired I2C bus clock frequency in Hz.
-
-Recommended properties:
-- pinctrl-names: should be "default";
-- pinctrl-0: phandle to pinctrl function
-
-Example
-
-/ {
-	i2c4: i2c4@10054000 {
-		compatible = "ingenic,jz4780-i2c";
-		reg = <0x10054000 0x1000>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <56>;
-
-		clocks = <&cgu JZ4780_CLK_SMB4>;
-		clock-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pins_i2c4_data>;
-
-	};
-};
-
diff --git a/dts/Bindings/i2c/i2c-mt65xx.txt b/dts/Bindings/i2c/i2c-mt65xx.txt
index 68f6d73a8b..88b71c1b32 100644
--- a/dts/Bindings/i2c/i2c-mt65xx.txt
+++ b/dts/Bindings/i2c/i2c-mt65xx.txt
@@ -8,6 +8,7 @@ Required properties:
       "mediatek,mt2712-i2c": for MediaTek MT2712
       "mediatek,mt6577-i2c": for MediaTek MT6577
       "mediatek,mt6589-i2c": for MediaTek MT6589
+      "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797
       "mediatek,mt7622-i2c": for MediaTek MT7622
       "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
       "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
diff --git a/dts/Bindings/i2c/i2c-qcom-cci.txt b/dts/Bindings/i2c/i2c-qcom-cci.txt
new file mode 100644
index 0000000000..c6668b7c66
--- /dev/null
+++ b/dts/Bindings/i2c/i2c-qcom-cci.txt
@@ -0,0 +1,92 @@
+Qualcomm Camera Control Interface (CCI) I2C controller
+
+PROPERTIES:
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		"qcom,msm8916-cci"
+		"qcom,msm8996-cci"
+		"qcom,sdm845-cci"
+
+- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address CCI I2C controller and length of memory
+		    mapped region.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: specifies the CCI I2C interrupt. The format of the
+		    specifier is defined by the binding document describing
+		    the node's interrupt parent.
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: a list of phandle, should contain an entry for each
+		    entries in clock-names.
+
+- clock-names
+	Usage: required
+	Value type: <string>
+	Definition: a list of clock names, must include "cci" clock.
+
+- power-domains
+	Usage: required for "qcom,msm8996-cci"
+	Value type: <prop-encoded-array>
+	Definition:
+
+SUBNODES:
+
+The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996 and
+sdm845), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
+
+PROPERTIES:
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: Index of the CCI bus/master
+
+- clock-frequency:
+	Usage: optional
+	Value type: <u32>
+	Definition: Desired I2C bus clock frequency in Hz, defaults to 100
+		    kHz if omitted.
+
+Example:
+
+	cci@a0c000 {
+		compatible = "qcom,msm8996-cci";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0xa0c000 0x1000>;
+		interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
+			 <&mmcc CAMSS_TOP_AHB_CLK>,
+			 <&mmcc CAMSS_CCI_AHB_CLK>,
+			 <&mmcc CAMSS_CCI_CLK>,
+			 <&mmcc CAMSS_AHB_CLK>;
+		clock-names = "mmss_mmagic_ahb",
+			      "camss_top_ahb",
+			      "cci_ahb",
+			      "cci",
+			      "camss_ahb";
+
+		i2c-bus@0 {
+			reg = <0>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c-bus@1 {
+			reg = <1>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
diff --git a/dts/Bindings/i2c/i2c-rk3x.yaml b/dts/Bindings/i2c/i2c-rk3x.yaml
index 61eac76c84..790aa7218e 100644
--- a/dts/Bindings/i2c/i2c-rk3x.yaml
+++ b/dts/Bindings/i2c/i2c-rk3x.yaml
@@ -28,14 +28,14 @@ properties:
       - const: rockchip,rk3399-i2c
       - items:
           - enum:
-            - rockchip,rk3036-i2c
-            - rockchip,rk3368-i2c
+              - rockchip,rk3036-i2c
+              - rockchip,rk3368-i2c
           - const: rockchip,rk3288-i2c
       - items:
           - enum:
-            - rockchip,px30-i2c
-            - rockchip,rk3308-i2c
-            - rockchip,rk3328-i2c
+              - rockchip,px30-i2c
+              - rockchip,rk3308-i2c
+              - rockchip,rk3328-i2c
           - const: rockchip,rk3399-i2c
 
   reg:
diff --git a/dts/Bindings/i2c/i2c-xiic.txt b/dts/Bindings/i2c/i2c-xiic.txt
deleted file mode 100644
index caf42e9894..0000000000
--- a/dts/Bindings/i2c/i2c-xiic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Xilinx IIC controller:
-
-Required properties:
-- compatible : Must be "xlnx,xps-iic-2.00.a"
-- reg : IIC register location and length
-- interrupts : IIC controller unterrupt
-- #address-cells = <1>
-- #size-cells = <0>
-- clocks: Input clock specifier. Refer to common clock bindings.
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
-- clock-names: Input clock name, should be 'pclk'.
-
-Example:
-
-	axi_iic_0: i2c@40800000 {
-		compatible = "xlnx,xps-iic-2.00.a";
-		clocks = <&clkc 15>;
-		interrupts = < 1 2 >;
-		reg = < 0x40800000 0x10000 >;
-
-		#size-cells = <0>;
-		#address-cells = <1>;
-	};
diff --git a/dts/Bindings/i2c/i2c.txt b/dts/Bindings/i2c/i2c.txt
index 9a53df4243..438ae12310 100644
--- a/dts/Bindings/i2c/i2c.txt
+++ b/dts/Bindings/i2c/i2c.txt
@@ -2,32 +2,26 @@ Generic device tree bindings for I2C busses
 ===========================================
 
 This document describes generic bindings which can be used to describe I2C
-busses in a device tree.
+busses and their child devices in a device tree.
 
-Required properties
--------------------
+Required properties (per bus)
+-----------------------------
 
 - #address-cells  - should be <1>. Read more about addresses below.
 - #size-cells     - should be <0>.
-- compatible      - name of I2C bus controller following generic names
-		    recommended practice.
+- compatible      - name of I2C bus controller
 
 For other required properties e.g. to describe register sets,
 clocks, etc. check the binding documentation of the specific driver.
 
 The cells properties above define that an address of children of an I2C bus
-are described by a single value. This is usually a 7 bit address. However,
-flags can be attached to the address. I2C_TEN_BIT_ADDRESS is used to mark a 10
-bit address. It is needed to avoid the ambiguity between e.g. a 7 bit address
-of 0x50 and a 10 bit address of 0x050 which, in theory, can be on the same bus.
-Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we listen to
-be devices ourselves.
+are described by a single value.
 
-Optional properties
--------------------
+Optional properties (per bus)
+-----------------------------
 
 These properties may not be supported by all drivers. However, if a driver
-wants to support one of the below features, it should adapt the bindings below.
+wants to support one of the below features, it should adapt these bindings.
 
 - clock-frequency
 	frequency of bus clock in Hz.
@@ -73,31 +67,54 @@ wants to support one of the below features, it should adapt the bindings below.
 	i2c bus clock frequency (clock-frequency).
 	Specified in Hz.
 
-- interrupts
-	interrupts used by the device.
-
-- interrupt-names
-	"irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
-	other names are	left to individual drivers.
-
-- host-notify
-	device uses SMBus host notify protocol instead of interrupt line.
-
 - multi-master
 	states that there is another master active on this bus. The OS can use
 	this information to adapt power management to keep the arbitration awake
-	all the time, for example.
+	all the time, for example. Can not be combined with 'single-master'.
 
-- wakeup-source
-	device can be used as a wakeup source.
+- single-master
+	states that there is no other master active on this bus. The OS can use
+	this information to detect a stalled bus more reliably, for example.
+	Can not be combined with 'multi-master'.
+
+Required properties (per child device)
+--------------------------------------
+
+- compatible
+	name of I2C slave device
 
 - reg
-	I2C slave addresses
+	One or many I2C slave addresses. These are usually a 7 bit addresses.
+	However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is
+	used to mark a 10 bit address. It is needed to avoid the ambiguity
+	between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050
+	which, in theory, can be on the same bus.
+	Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we
+	listen to be devices ourselves.
+
+Optional properties (per child device)
+--------------------------------------
+
+These properties may not be supported by all drivers. However, if a driver
+wants to support one of the below features, it should adapt these bindings.
+
+- host-notify
+	device uses SMBus host notify protocol instead of interrupt line.
+
+- interrupts
+	interrupts used by the device.
+
+- interrupt-names
+	"irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
+	other names are	left to individual drivers.
 
 - reg-names
 	Names of map programmable addresses.
 	It can contain any map needing another address than default one.
 
+- wakeup-source
+	device can be used as a wakeup source.
+
 Binding may contain optional "interrupts" property, describing interrupts
 used by the device. I2C core will assign "irq" interrupt (or the very first
 interrupt if not using interrupt names) as primary interrupt for the slave.
diff --git a/dts/Bindings/i2c/ingenic,i2c.yaml b/dts/Bindings/i2c/ingenic,i2c.yaml
new file mode 100644
index 0000000000..682ed1bbf5
--- /dev/null
+++ b/dts/Bindings/i2c/ingenic,i2c.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ingenic,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs I2C controller devicetree bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  $nodename:
+    pattern: "^i2c@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - ingenic,jz4780-i2c
+      - ingenic,x1000-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000 ]
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-frequency
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c@10054000 {
+      compatible = "ingenic,jz4780-i2c";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      reg = <0x10054000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <56>;
+
+      clocks = <&cgu JZ4780_CLK_SMB4>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pins_i2c4_data>;
+
+      dmas = <&dma JZ4780_DMA_SMB4_RX 0xffffffff>,
+             <&dma JZ4780_DMA_SMB4_TX 0xffffffff>;
+      dma-names = "rx", "tx";
+
+      clock-frequency = <400000>;
+
+      rtc@51 {
+        compatible = "nxp,pcf8563";
+        reg = <0x51>;
+
+        interrupt-parent = <&gpf>;
+        interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+      };
+    };
diff --git a/dts/Bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/dts/Bindings/i2c/nuvoton,npcm7xx-i2c.yaml
new file mode 100644
index 0000000000..e3ef2d36f3
--- /dev/null
+++ b/dts/Bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
+
+description: |
+  The NPCM750x includes sixteen I2C bus controllers. All Controllers support
+  both master and slave mode. Each controller can switch between master and slave
+  at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
+  RX.
+
+maintainers:
+  - Tali Perry <tali.perry1@gmail.com>
+
+properties:
+  compatible:
+    const: nuvoton,npcm7xx-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Reference clock for the I2C bus
+
+  clock-frequency:
+    description: Desired I2C bus clock frequency in Hz. If not specified,
+                 the default 100 kHz frequency will be used.
+                 possible values are 100000, 400000 and 1000000.
+    default: 100000
+    enum: [100000, 400000, 1000000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c0: i2c@80000 {
+        reg = <0x80000 0x1000>;
+        clocks = <&clk NPCM7XX_CLK_APB2>;
+        clock-frequency = <100000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        compatible = "nuvoton,npcm750-i2c";
+    };
+
+...
diff --git a/dts/Bindings/i2c/nvidia,tegra20-i2c.txt b/dts/Bindings/i2c/nvidia,tegra20-i2c.txt
index f64064f8bd..18c0de3624 100644
--- a/dts/Bindings/i2c/nvidia,tegra20-i2c.txt
+++ b/dts/Bindings/i2c/nvidia,tegra20-i2c.txt
@@ -35,6 +35,12 @@ Required properties:
 	Due to above changes, Tegra114 I2C driver makes incompatible with
 	previous hardware driver. Hence, tegra114 I2C controller is compatible
 	with "nvidia,tegra114-i2c".
+  nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is part of the
+	host1x domain and typically used for camera use-cases. This VI I2C
+	controller is mostly compatible with the programming model of the
+	regular I2C controllers with a few exceptions. The I2C registers start
+	at an offset of 0xc00 (instead of 0), registers are 16 bytes apart
+	(rather than 4) and the controller does not support slave mode.
 - reg: Should contain I2C controller registers physical address and length.
 - interrupts: Should contain I2C controller interrupts.
 - address-cells: Address cells for I2C device address.
diff --git a/dts/Bindings/i2c/renesas,i2c.txt b/dts/Bindings/i2c/renesas,i2c.txt
index c359965d07..a03f9f5cb3 100644
--- a/dts/Bindings/i2c/renesas,i2c.txt
+++ b/dts/Bindings/i2c/renesas,i2c.txt
@@ -2,6 +2,7 @@ I2C for R-Car platforms
 
 Required properties:
 - compatible:
+	"renesas,i2c-r8a7742" if the device is a part of a R8A7742 SoC.
 	"renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC.
 	"renesas,i2c-r8a7744" if the device is a part of a R8A7744 SoC.
 	"renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
diff --git a/dts/Bindings/i2c/renesas,iic.txt b/dts/Bindings/i2c/renesas,iic.txt
index ffe085c994..89facb0933 100644
--- a/dts/Bindings/i2c/renesas,iic.txt
+++ b/dts/Bindings/i2c/renesas,iic.txt
@@ -4,6 +4,7 @@ Required properties:
 - compatible      :
 			- "renesas,iic-r8a73a4" (R-Mobile APE6)
 			- "renesas,iic-r8a7740" (R-Mobile A1)
+			- "renesas,iic-r8a7742" (RZ/G1H)
 			- "renesas,iic-r8a7743" (RZ/G1M)
 			- "renesas,iic-r8a7744" (RZ/G1N)
 			- "renesas,iic-r8a7745" (RZ/G1E)
diff --git a/dts/Bindings/i2c/snps,designware-i2c.yaml b/dts/Bindings/i2c/snps,designware-i2c.yaml
new file mode 100644
index 0000000000..4f746bef23
--- /dev/null
+++ b/dts/Bindings/i2c/snps,designware-i2c.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/snps,designware-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB I2C Controller
+
+maintainers:
+  - Jarkko Nikula <jarkko.nikula@linux.intel.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: mscc,ocelot-i2c
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+properties:
+  compatible:
+    oneOf:
+      - description: Generic Synopsys DesignWare I2C controller
+        const: snps,designware-i2c
+      - description: Microsemi Ocelot SoCs I2C controller
+        items:
+          - const: mscc,ocelot-i2c
+          - const: snps,designware-i2c
+      - description: Baikal-T1 SoC System I2C controller
+        const: baikal,bt1-sys-i2c
+
+  reg:
+    minItems: 1
+    items:
+      - description: DW APB I2C controller memory mapped registers
+      - description: |
+          ICPU_CFG:TWI_DELAY registers to setup the SDA hold time.
+          This registers are specific to the Ocelot I2C-controller.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: I2C controller reference clock source
+      - description: APB interface clock source
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ref
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    description: Desired I2C bus clock frequency in Hz
+    enum: [100000, 400000, 1000000, 3400000]
+    default: 400000
+
+  i2c-sda-hold-time-ns:
+    maxItems: 1
+    description: |
+      The property should contain the SDA hold time in nanoseconds. This option
+      is only supported in hardware blocks version 1.11a or newer or on
+      Microsemi SoCs.
+
+  i2c-scl-falling-time-ns:
+    maxItems: 1
+    description: |
+      The property should contain the SCL falling time in nanoseconds.
+      This value is used to compute the tLOW period.
+    default: 300
+
+  i2c-sda-falling-time-ns:
+    maxItems: 1
+    description: |
+      The property should contain the SDA falling time in nanoseconds.
+      This value is used to compute the tHIGH period.
+    default: 300
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - interrupts
+
+examples:
+  - |
+    i2c@f0000 {
+      compatible = "snps,designware-i2c";
+      reg = <0xf0000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <11>;
+      clock-frequency = <400000>;
+    };
+  - |
+    i2c@1120000 {
+      compatible = "snps,designware-i2c";
+      reg = <0x1120000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <12 1>;
+      clock-frequency = <400000>;
+      i2c-sda-hold-time-ns = <300>;
+      i2c-sda-falling-time-ns = <300>;
+      i2c-scl-falling-time-ns = <300>;
+    };
+  - |
+    i2c@2000 {
+      compatible = "snps,designware-i2c";
+      reg = <0x2000 0x100>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clock-frequency = <400000>;
+      clocks = <&i2cclk>;
+      interrupts = <0>;
+
+      eeprom@64 {
+        compatible = "atmel,24c02";
+        reg = <0x64>;
+      };
+    };
+  - |
+    i2c@100400 {
+      compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+      reg = <0x100400 0x100>, <0x198 0x8>;
+      pinctrl-0 = <&i2c_pins>;
+      pinctrl-names = "default";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <8>;
+      clocks = <&ahb_clk>;
+    };
+...
diff --git a/dts/Bindings/i2c/st,stm32-i2c.yaml b/dts/Bindings/i2c/st,stm32-i2c.yaml
index 900ec1ab6a..f2fcbb3611 100644
--- a/dts/Bindings/i2c/st,stm32-i2c.yaml
+++ b/dts/Bindings/i2c/st,stm32-i2c.yaml
@@ -17,6 +17,7 @@ allOf:
           contains:
             enum:
               - st,stm32f7-i2c
+              - st,stm32mp15-i2c
     then:
       properties:
         i2c-scl-rising-time-ns:
@@ -30,11 +31,10 @@ allOf:
                        Fast Mode Plus speed is selected by slave.
                        Format is phandle to syscfg / register offset within
                        syscfg / register bitmask for FMP bit.
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/phandle-array"
-            - items:
-                minItems: 3
-                maxItems: 3
+          $ref: "/schemas/types.yaml#/definitions/phandle-array"
+          items:
+            minItems: 3
+            maxItems: 3
 
   - if:
       properties:
@@ -52,6 +52,7 @@ properties:
     enum:
       - st,stm32f4-i2c
       - st,stm32f7-i2c
+      - st,stm32mp15-i2c
 
   reg:
     maxItems: 1
@@ -80,11 +81,11 @@ properties:
   clock-frequency:
     description: Desired I2C bus clock frequency in Hz. If not specified,
                  the default 100 kHz frequency will be used.
-                 For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode,
-                 Fast-mode and Fast-mode Plus are supported, possible
-                 values are 100000, 400000 and 1000000.
+                 For STM32F7, STM32H7 and STM32MP1 SoCs, if timing parameters
+                 match, the bus clock frequency can be from 1Hz to 1MHz.
     default: 100000
-    enum: [100000, 400000, 1000000]
+    minimum: 1
+    maximum: 1000000
 
 required:
   - compatible
@@ -121,12 +122,12 @@ examples:
           clocks = <&rcc 1 CLK_I2C1>;
       };
 
-    //Example 3 (with st,stm32f7-i2c compatible on stm32mp)
+    //Example 3 (with st,stm32mp15-i2c compatible on stm32mp)
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
       i2c@40013000 {
-          compatible = "st,stm32f7-i2c";
+          compatible = "st,stm32mp15-i2c";
           #address-cells = <1>;
           #size-cells = <0>;
           reg = <0x40013000 0x400>;
diff --git a/dts/Bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/dts/Bindings/i2c/xlnx,xps-iic-2.00.a.yaml
new file mode 100644
index 0000000000..67c1c84ba3
--- /dev/null
+++ b/dts/Bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ilinx IIC controller Device Tree Bindings
+
+maintainers:
+  - info@mocean-labs.com
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: xlnx,xps-iic-2.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  clock-name:
+    const: pclk
+    description: |
+      Input clock name.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    axi_iic_0: i2c@40800000 {
+      compatible = "xlnx,xps-iic-2.00.a";
+      clocks = <&clkc 15>;
+      interrupts = < 1 2 >;
+      reg = < 0x40800000 0x10000 >;
+
+      #size-cells = <0>;
+      #address-cells = <1>;
+    };