dts: update to v6.0-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

16 files changed, 613 insertions, 270 deletions

diff --git a/dts/Bindings/i2c/arm,i2c-versatile.yaml b/dts/Bindings/i2c/arm,i2c-versatile.yaml
new file mode 100644
index 0000000000..e58465d1b0
--- /dev/null
+++ b/dts/Bindings/i2c/arm,i2c-versatile.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/arm,i2c-versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C Controller on ARM Ltd development platforms
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-i2c
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+...
+
diff --git a/dts/Bindings/i2c/i2c-efm32.txt b/dts/Bindings/i2c/i2c-efm32.txt
deleted file mode 100644
index 3b30e54ae3..0000000000
--- a/dts/Bindings/i2c/i2c-efm32.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Energymicro efm32 i2c controller
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible : should be "energymicro,efm32-i2c"
- - interrupts : the interrupt number
- - clocks : reference to the module clock
-
-Recommended properties :
-
- - clock-frequency : maximal I2C bus clock frequency in Hz.
- - energymicro,location : Decides the location of the USART I/O pins.
-   Allowed range : [0 .. 6]
-
-Example:
-	i2c0: i2c@4000a000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "energymicro,efm32-i2c";
-		reg = <0x4000a000 0x400>;
-		interrupts = <9>;
-		clocks = <&cmu clk_HFPERCLKI2C0>;
-		clock-frequency = <100000>;
-		energymicro,location = <3>;
-
-		eeprom@50 {
-			compatible = "microchip,24c02";
-			reg = <0x50>;
-			pagesize = <16>;
-		};
-	};
-
diff --git a/dts/Bindings/i2c/i2c-mt65xx.yaml b/dts/Bindings/i2c/i2c-mt65xx.yaml
index 16a1a31182..4e730fb7be 100644
--- a/dts/Bindings/i2c/i2c-mt65xx.yaml
+++ b/dts/Bindings/i2c/i2c-mt65xx.yaml
@@ -27,6 +27,7 @@ properties:
       - const: mediatek,mt8173-i2c
       - const: mediatek,mt8183-i2c
       - const: mediatek,mt8186-i2c
+      - const: mediatek,mt8188-i2c
       - const: mediatek,mt8192-i2c
       - items:
           - enum:
diff --git a/dts/Bindings/i2c/i2c-nomadik.txt b/dts/Bindings/i2c/i2c-nomadik.txt
deleted file mode 100644
index 72065b0ff6..0000000000
--- a/dts/Bindings/i2c/i2c-nomadik.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-I2C for Nomadik based systems
-
-Required (non-standard) properties:
- - Nil
-
-Recommended (non-standard) properties:
- - clock-frequency : Maximum bus clock frequency for the device
-
-Optional (non-standard) properties:
- - Nil
-
-Example :
-
-i2c@80004000 {
-        compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-        reg = <0x80004000 0x1000>;
-        interrupts = <0 21 0x4>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-        v-i2c-supply = <&db8500_vape_reg>;
-
-        clock-frequency = <400000>;
-};
diff --git a/dts/Bindings/i2c/i2c-ocores.txt b/dts/Bindings/i2c/i2c-ocores.txt
deleted file mode 100644
index a37c9455b2..0000000000
--- a/dts/Bindings/i2c/i2c-ocores.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device tree configuration for i2c-ocores
-
-Required properties:
-- compatible      : "opencores,i2c-ocores"
-                    "aeroflexgaisler,i2cmst"
-                    "sifive,fu540-c000-i2c", "sifive,i2c0"
-                    For Opencore based I2C IP block reimplemented in
-                    FU540-C000 SoC.
-                    "sifive,fu740-c000-i2c", "sifive,i2c0"
-                    For Opencore based I2C IP block reimplemented in
-                    FU740-C000 SoC.
-                    Please refer to sifive-blocks-ip-versioning.txt for
-                    additional details.
-- reg             : bus address start and address range size of device
-- clocks          : handle to the controller clock; see the note below.
-                    Mutually exclusive with opencores,ip-clock-frequency
-- opencores,ip-clock-frequency: frequency of the controller clock in Hz;
-                    see the note below. Mutually exclusive with clocks
-- #address-cells  : should be <1>
-- #size-cells     : should be <0>
-
-Optional properties:
-- interrupts      : interrupt number.
-- clock-frequency : frequency of bus clock in Hz; see the note below.
-                    Defaults to 100 KHz when the property is not specified
-- reg-shift       : device register offsets are shifted by this value
-- reg-io-width    : io register width in bytes (1, 2 or 4)
-- regstep         : deprecated, use reg-shift above
-
-Note
-clock-frequency property is meant to control the bus frequency for i2c bus
-drivers, but it was incorrectly used to specify i2c controller input clock
-frequency. So the following rules are set to fix this situation:
-- if clock-frequency is present and neither opencores,ip-clock-frequency nor
-  clocks are, then clock-frequency specifies i2c controller clock frequency.
-  This is to keep backwards compatibility with setups using old DTB. i2c bus
-  frequency is fixed at 100 KHz.
-- if clocks is present it specifies i2c controller clock. clock-frequency
-  property specifies i2c bus frequency.
-- if opencores,ip-clock-frequency is present it specifies i2c controller
-  clock frequency. clock-frequency property specifies i2c bus frequency.
-
-Examples:
-
-	i2c0: ocores@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "opencores,i2c-ocores";
-		reg = <0xa0000000 0x8>;
-		interrupts = <10>;
-		opencores,ip-clock-frequency = <20000000>;
-
-		reg-shift = <0>;	/* 8 bit registers */
-		reg-io-width = <1>;	/* 8 bit read/write */
-
-		dummy@60 {
-			compatible = "dummy";
-			reg = <0x60>;
-		};
-	};
-or
-	i2c0: ocores@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "opencores,i2c-ocores";
-		reg = <0xa0000000 0x8>;
-		interrupts = <10>;
-		clocks = <&osc>;
-		clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
-
-		reg-shift = <0>;	/* 8 bit registers */
-		reg-io-width = <1>;	/* 8 bit read/write */
-
-		dummy@60 {
-			compatible = "dummy";
-			reg = <0x60>;
-		};
-	};
diff --git a/dts/Bindings/i2c/i2c-qcom-cci.txt b/dts/Bindings/i2c/i2c-qcom-cci.txt
deleted file mode 100644
index 924ad8c034..0000000000
--- a/dts/Bindings/i2c/i2c-qcom-cci.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-Qualcomm Camera Control Interface (CCI) I2C controller
-
-PROPERTIES:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		"qcom,msm8916-cci"
-		"qcom,msm8996-cci"
-		"qcom,sdm845-cci"
-		"qcom,sm8250-cci"
-		"qcom,sm8450-cci"
-
-- reg
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address CCI I2C controller and length of memory
-		    mapped region.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: specifies the CCI I2C interrupt. The format of the
-		    specifier is defined by the binding document describing
-		    the node's interrupt parent.
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: a list of phandle, should contain an entry for each
-		    entries in clock-names.
-
-- clock-names
-	Usage: required
-	Value type: <string>
-	Definition: a list of clock names, must include "cci" clock.
-
-- power-domains
-	Usage: required for "qcom,msm8996-cci"
-	Value type: <prop-encoded-array>
-	Definition:
-
-SUBNODES:
-
-The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996,
-sdm845, sm8250 and sm8450), described as subdevices named "i2c-bus@0" and
-"i2c-bus@1".
-
-PROPERTIES:
-
-- reg:
-	Usage: required
-	Value type: <u32>
-	Definition: Index of the CCI bus/master
-
-- clock-frequency:
-	Usage: optional
-	Value type: <u32>
-	Definition: Desired I2C bus clock frequency in Hz, defaults to 100
-		    kHz if omitted.
-
-Example:
-
-	cci@a0c000 {
-		compatible = "qcom,msm8996-cci";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xa0c000 0x1000>;
-		interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
-			 <&mmcc CAMSS_TOP_AHB_CLK>,
-			 <&mmcc CAMSS_CCI_AHB_CLK>,
-			 <&mmcc CAMSS_CCI_CLK>,
-			 <&mmcc CAMSS_AHB_CLK>;
-		clock-names = "mmss_mmagic_ahb",
-			      "camss_top_ahb",
-			      "cci_ahb",
-			      "cci",
-			      "camss_ahb";
-
-		i2c-bus@0 {
-			reg = <0>;
-			clock-frequency = <400000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c-bus@1 {
-			reg = <1>;
-			clock-frequency = <400000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
diff --git a/dts/Bindings/i2c/i2c-rk3x.yaml b/dts/Bindings/i2c/i2c-rk3x.yaml
index 5339dd4fc3..ee9f8b91d2 100644
--- a/dts/Bindings/i2c/i2c-rk3x.yaml
+++ b/dts/Bindings/i2c/i2c-rk3x.yaml
@@ -37,6 +37,8 @@ properties:
               - rockchip,rk3308-i2c
               - rockchip,rk3328-i2c
               - rockchip,rk3568-i2c
+              - rockchip,rk3588-i2c
+              - rockchip,rv1126-i2c
           - const: rockchip,rk3399-i2c
 
   reg:
diff --git a/dts/Bindings/i2c/i2c-versatile.txt b/dts/Bindings/i2c/i2c-versatile.txt
deleted file mode 100644
index 361d31c51b..0000000000
--- a/dts/Bindings/i2c/i2c-versatile.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-i2c Controller on ARM Versatile platform:
-
-Required properties:
-- compatible : Must be "arm,versatile-i2c";
-- reg
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
diff --git a/dts/Bindings/i2c/ibm,p8-occ-hwmon.txt b/dts/Bindings/i2c/ibm,p8-occ-hwmon.txt
deleted file mode 100644
index 5dc5d2e257..0000000000
--- a/dts/Bindings/i2c/ibm,p8-occ-hwmon.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Device-tree bindings for I2C-based On-Chip Controller hwmon device
-------------------------------------------------------------------
-
-Required properties:
- - compatible = "ibm,p8-occ-hwmon";
- - reg = <I2C address>;			: I2C bus address
-
-Examples:
-
-    i2c-bus@100 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        clock-frequency = <100000>;
-        < more properties >
-
-        occ-hwmon@1 {
-            compatible = "ibm,p8-occ-hwmon";
-            reg = <0x50>;
-        };
-
-        occ-hwmon@2 {
-            compatible = "ibm,p8-occ-hwmon";
-            reg = <0x51>;
-        };
-    };
diff --git a/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml b/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml
index f771c09aab..0ec033e488 100644
--- a/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -21,10 +21,18 @@ properties:
           - enum:
               - allwinner,sun8i-a23-i2c
               - allwinner,sun8i-a83t-i2c
+              - allwinner,sun8i-v536-i2c
               - allwinner,sun50i-a64-i2c
-              - allwinner,sun50i-a100-i2c
               - allwinner,sun50i-h6-i2c
+          - const: allwinner,sun6i-a31-i2c
+      - description: Allwinner SoCs with offload support
+        items:
+          - enum:
+              - allwinner,sun20i-d1-i2c
+              - allwinner,sun50i-a100-i2c
               - allwinner,sun50i-h616-i2c
+              - allwinner,sun50i-r329-i2c
+          - const: allwinner,sun8i-v536-i2c
           - const: allwinner,sun6i-a31-i2c
       - const: marvell,mv64xxx-i2c
       - const: marvell,mv78230-i2c
diff --git a/dts/Bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/dts/Bindings/i2c/nuvoton,npcm7xx-i2c.yaml
index 128444942a..09d2591e1f 100644
--- a/dts/Bindings/i2c/nuvoton,npcm7xx-i2c.yaml
+++ b/dts/Bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -7,17 +7,18 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
 
 description: |
-  The NPCM750x includes sixteen I2C bus controllers. All Controllers support
-  both master and slave mode. Each controller can switch between master and slave
-  at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
-  RX.
+  I2C bus controllers of the NPCM series support both master and
+  slave mode. Each controller can switch between master and slave at run time
+  (i.e. IPMB mode). HW FIFO for TX and RX are supported.
 
 maintainers:
   - Tali Perry <tali.perry1@gmail.com>
 
 properties:
   compatible:
-    const: nuvoton,npcm750-i2c
+    enum:
+      - nuvoton,npcm750-i2c
+      - nuvoton,npcm845-i2c
 
   reg:
     maxItems: 1
@@ -36,6 +37,10 @@ properties:
     default: 100000
     enum: [100000, 400000, 1000000]
 
+  nuvoton,sys-mgr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of system manager register node.
+
 required:
   - compatible
   - reg
@@ -44,6 +49,15 @@ required:
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nuvoton,npcm845-i2c
+
+    then:
+      required:
+        - nuvoton,sys-mgr
 
 unevaluatedProperties: false
 
@@ -57,6 +71,7 @@ examples:
         clock-frequency = <100000>;
         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
         compatible = "nuvoton,npcm750-i2c";
+        nuvoton,sys-mgr = <&gcr>;
     };
 
 ...
diff --git a/dts/Bindings/i2c/opencores,i2c-ocores.yaml b/dts/Bindings/i2c/opencores,i2c-ocores.yaml
new file mode 100644
index 0000000000..85d9efb743
--- /dev/null
+++ b/dts/Bindings/i2c/opencores,i2c-ocores.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/opencores,i2c-ocores.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenCores I2C controller
+
+maintainers:
+  - Peter Korsgaard <peter@korsgaard.com>
+  - Andrew Lunn <andrew@lunn.ch>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,fu740-c000-i2c # Opencore based IP block FU740-C000 SoC
+              - sifive,fu540-c000-i2c # Opencore based IP block FU540-C000 SoC
+          - const: sifive,i2c0
+      - enum:
+          - opencores,i2c-ocores
+          - aeroflexgaisler,i2cmst
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      clock-frequency property is meant to control the bus frequency for i2c bus
+      drivers, but it was incorrectly used to specify i2c controller input clock
+      frequency. So the following rules are set to fix this situation:
+      - if clock-frequency is present and neither opencores,ip-clock-frequency nor
+        clocks are, then clock-frequency specifies i2c controller clock frequency.
+        This is to keep backwards compatibility with setups using old DTB. i2c bus
+        frequency is fixed at 100 KHz.
+      - if clocks is present it specifies i2c controller clock. clock-frequency
+        property specifies i2c bus frequency.
+      - if opencores,ip-clock-frequency is present it specifies i2c controller
+        clock frequency. clock-frequency property specifies i2c bus frequency.
+    default: 100000
+
+  reg-io-width:
+    description: |
+      io register width in bytes
+    enum: [1, 2, 4]
+
+  reg-shift:
+    description: |
+      device register offsets are shifted by this value
+    default: 0
+
+  regstep:
+    description: |
+      deprecated, use reg-shift above
+    deprecated: true
+
+  opencores,ip-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Frequency of the controller clock in Hz. Mutually exclusive with clocks.
+      See the note above.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+oneOf:
+  - required:
+      - opencores,ip-clock-frequency
+  - required:
+      - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@a0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      opencores,ip-clock-frequency = <20000000>;
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+
+    i2c@b0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      clocks = <&osc>;
+      clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+...
diff --git a/dts/Bindings/i2c/qcom,i2c-cci.yaml b/dts/Bindings/i2c/qcom,i2c-cci.yaml
new file mode 100644
index 0000000000..90c9e40122
--- /dev/null
+++ b/dts/Bindings/i2c/qcom,i2c-cci.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Control Interface (CCI) I2C controller
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+  - Robert Foss <robert.foss@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8916-cci
+      - qcom,msm8974-cci
+      - qcom,msm8996-cci
+      - qcom,sdm845-cci
+      - qcom,sm8250-cci
+      - qcom,sm8450-cci
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    minItems: 4
+    maxItems: 6
+
+  clock-names:
+    minItems: 4
+    maxItems: 6
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^i2c-bus@[01]$":
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clock-frequency:
+        default: 100000
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-cci
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-cci
+    then:
+      properties:
+        i2c-bus@1: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-cci
+              - qcom,msm8996-cci
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: camss_top_ahb
+            - const: cci_ahb
+            - const: cci
+            - const: camss_ahb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-cci
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: soc_ahb
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+            - const: cci_src
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8250-cci
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+            - const: cci_src
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cci@ac4a000 {
+        reg = <0x0ac4a000 0x4000>;
+        compatible = "qcom,sdm845-cci";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+        power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+        clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                 <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+                 <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                 <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+                 <&clock_camcc CAM_CC_CCI_CLK>,
+                 <&clock_camcc CAM_CC_CCI_CLK_SRC>;
+        clock-names = "camnoc_axi",
+                      "soc_ahb",
+                      "slow_ahb_src",
+                      "cpas_ahb",
+                      "cci",
+                      "cci_src";
+
+        assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                          <&clock_camcc CAM_CC_CCI_CLK>;
+        assigned-clock-rates = <80000000>,
+                               <37500000>;
+
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&cci0_default &cci1_default>;
+        pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+        i2c-bus@0 {
+            reg = <0>;
+            clock-frequency = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            camera@10 {
+                compatible = "ovti,ov8856";
+                reg = <0x10>;
+
+                reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam0_default>;
+
+                clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+                clock-names = "xvclk";
+                clock-frequency = <19200000>;
+
+                dovdd-supply = <&vreg_lvs1a_1p8>;
+                avdd-supply = <&cam0_avdd_2v8>;
+                dvdd-supply = <&cam0_dvdd_1v2>;
+
+                port {
+                    ov8856_ep: endpoint {
+                        link-frequencies = /bits/ 64 <360000000 180000000>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csiphy0_ep>;
+                    };
+                };
+            };
+        };
+
+        cci_i2c1: i2c-bus@1 {
+            reg = <1>;
+            clock-frequency = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            camera@60 {
+                compatible = "ovti,ov7251";
+                reg = <0x60>;
+
+                enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam3_default>;
+
+                clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+                clock-names = "xclk";
+                clock-frequency = <24000000>;
+
+                vdddo-supply = <&vreg_lvs1a_1p8>;
+                vdda-supply = <&cam3_avdd_2v8>;
+
+                port {
+                    ov7251_ep: endpoint {
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&csiphy3_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/i2c/renesas,rzv2m.yaml b/dts/Bindings/i2c/renesas,rzv2m.yaml
new file mode 100644
index 0000000000..c46378efc1
--- /dev/null
+++ b/dts/Bindings/i2c/renesas,rzv2m.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,rzv2m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M I2C Bus Interface
+
+maintainers:
+  - Phil Edworthy <phil.edworthy@renesas.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,i2c-r9a09g011  # RZ/V2M
+      - const: renesas,rzv2m-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Data transmission/reception interrupt
+      - description: Status interrupt
+
+  interrupt-names:
+    items:
+      - const: tia
+      - const: tis
+
+  clock-frequency:
+    default: 100000
+    enum: [ 100000, 400000 ]
+    description:
+      Desired I2C bus clock frequency in Hz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - power-domains
+  - resets
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c0: i2c@a4030000 {
+        compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+        reg = <0xa4030000 0x80>;
+        interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "tia", "tis";
+        clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK0>;
+        resets = <&cpg R9A09G011_IIC_GPA_PRESETN>;
+        power-domains = <&cpg>;
+        clock-frequency = <100000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/dts/Bindings/i2c/st,nomadik-i2c.yaml b/dts/Bindings/i2c/st,nomadik-i2c.yaml
new file mode 100644
index 0000000000..42c5974ec7
--- /dev/null
+++ b/dts/Bindings/i2c/st,nomadik-i2c.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,nomadik-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST Microelectronics Nomadik I2C Bindings
+
+description: The Nomadik I2C host controller began its life in the ST
+  Microelectronics STn8800 SoC, and was then inherited into STn8810 and
+  STn8815. It was part of the prototype STn8500 which then became ST-Ericsson
+  DB8500 after the merge of these two companies wireless divisions.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,nomadik-i2c
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      # The variant found in STn8815
+      - items:
+          - const: st,nomadik-i2c
+          - const: arm,primecell
+      # The variant found in DB8500
+      - items:
+          - const: stericsson,db8500-i2c
+          - const: st,nomadik-i2c
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      # Clock name in STn8815
+      - items:
+          - const: mclk
+          - const: apb_pclk
+      # Clock name in DB8500
+      - items:
+          - const: i2cclk
+          - const: apb_pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 400000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stericsson,db8500-prcc-reset.h>
+    #include <dt-bindings/arm/ux500_pm_domains.h>
+    i2c@80004000 {
+      compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+      reg = <0x80004000 0x1000>;
+      interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-frequency = <400000>;
+      clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+      clock-names = "i2cclk", "apb_pclk";
+      power-domains = <&pm_domains DOMAIN_VAPE>;
+      resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>;
+    };
+
+    i2c@101f8000 {
+      compatible = "st,nomadik-i2c", "arm,primecell";
+      reg = <0x101f8000 0x1000>;
+      interrupt-parent = <&vica>;
+      interrupts = <20>;
+      clock-frequency = <100000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&i2c0clk>, <&pclki2c0>;
+      clock-names = "mclk", "apb_pclk";
+    };
+
+...
diff --git a/dts/Bindings/i2c/st,stm32-i2c.yaml b/dts/Bindings/i2c/st,stm32-i2c.yaml
index dccbb18b6d..a415887637 100644
--- a/dts/Bindings/i2c/st,stm32-i2c.yaml
+++ b/dts/Bindings/i2c/st,stm32-i2c.yaml
@@ -17,6 +17,7 @@ allOf:
           contains:
             enum:
               - st,stm32f7-i2c
+              - st,stm32mp13-i2c
               - st,stm32mp15-i2c
     then:
       properties:
@@ -45,6 +46,7 @@ properties:
     enum:
       - st,stm32f4-i2c
       - st,stm32f7-i2c
+      - st,stm32mp13-i2c
       - st,stm32mp15-i2c
 
   reg: