dts: update to v5.2-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 files changed, 143 insertions, 24 deletions

diff --git a/dts/Bindings/iio/adc/adi,ad7606.txt b/dts/Bindings/iio/adc/adi,ad7606.txt
index d7b6241ca8..d865246019 100644
--- a/dts/Bindings/iio/adc/adi,ad7606.txt
+++ b/dts/Bindings/iio/adc/adi,ad7606.txt
@@ -7,6 +7,7 @@ Required properties for the AD7606:
 	* "adi,ad7606-8"
 	* "adi,ad7606-6"
 	* "adi,ad7606-4"
+	* "adi,ad7616"
 - reg: SPI chip select number for the device
 - spi-max-frequency: Max SPI frequency to use
 	see: Documentation/devicetree/bindings/spi/spi-bus.txt
diff --git a/dts/Bindings/iio/adc/adi,ad7780.txt b/dts/Bindings/iio/adc/adi,ad7780.txt
new file mode 100644
index 0000000000..440e525553
--- /dev/null
+++ b/dts/Bindings/iio/adc/adi,ad7780.txt
@@ -0,0 +1,48 @@
+* Analog Devices AD7170/AD7171/AD7780/AD7781
+
+Data sheets:
+
+- AD7170:
+	* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
+- AD7171:
+	* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
+- AD7780:
+	* https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
+- AD7781:
+	* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
+
+Required properties:
+
+- compatible: should be one of
+	* "adi,ad7170"
+	* "adi,ad7171"
+	* "adi,ad7780"
+	* "adi,ad7781"
+- reg: spi chip select number for the device
+- vref-supply: the regulator supply for the ADC reference voltage
+
+Optional properties:
+
+- powerdown-gpios:  must be the device tree identifier of the PDRST pin. If
+		    specified, it will be asserted during driver probe. As the
+		    line is active high, it should be marked GPIO_ACTIVE_HIGH.
+- adi,gain-gpios:   must be the device tree identifier of the GAIN pin. Only for
+		    the ad778x chips. If specified, it will be asserted during
+		    driver probe. As the line is active low, it should be marked
+		    GPIO_ACTIVE_LOW.
+- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only
+		    for the ad778x chips. If specified, it will be asserted
+		    during driver probe. As the line is active low, it should be
+		    marked GPIO_ACTIVE_LOW.
+
+Example:
+
+adc@0 {
+	compatible =  "adi,ad7780";
+	reg =	      <0>;
+	vref-supply = <&vdd_supply>
+
+	powerdown-gpios  = <&gpio 12 GPIO_ACTIVE_HIGH>;
+	adi,gain-gpios   = <&gpio  5 GPIO_ACTIVE_LOW>;
+	adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+};
diff --git a/dts/Bindings/iio/adc/amlogic,meson-saradc.txt b/dts/Bindings/iio/adc/amlogic,meson-saradc.txt
index 75c7759541..d57e9df25f 100644
--- a/dts/Bindings/iio/adc/amlogic,meson-saradc.txt
+++ b/dts/Bindings/iio/adc/amlogic,meson-saradc.txt
@@ -9,6 +9,7 @@ Required properties:
 			- "amlogic,meson-gxl-saradc" for GXL
 			- "amlogic,meson-gxm-saradc" for GXM
 			- "amlogic,meson-axg-saradc" for AXG
+			- "amlogic,meson-g12a-saradc" for AXG
 		along with the generic "amlogic,meson-saradc"
 - reg:		the physical base address and length of the registers
 - interrupts:	the interrupt indicating end of sampling
diff --git a/dts/Bindings/iio/adc/avia-hx711.txt b/dts/Bindings/iio/adc/avia-hx711.txt
deleted file mode 100644
index 7222328a3d..0000000000
--- a/dts/Bindings/iio/adc/avia-hx711.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* AVIA HX711 ADC chip for weight cells
-  Bit-banging driver
-
-Required properties:
- - compatible:	Should be "avia,hx711"
- - sck-gpios:	Definition of the GPIO for the clock
- - dout-gpios:	Definition of the GPIO for data-out
-		See Documentation/devicetree/bindings/gpio/gpio.txt
- - avdd-supply:	Definition of the regulator used as analog supply
-
-Optional properties:
- - clock-frequency:	Frequency of PD_SCK in Hz
-			Minimum value allowed is 10 kHz because of maximum
-			high time of 50 microseconds.
-
-Example:
-weight {
-	compatible = "avia,hx711";
-	sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
-	dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-	avdd-suppy = <&avdd>;
-	clock-frequency = <100000>;
-};
-
diff --git a/dts/Bindings/iio/adc/avia-hx711.yaml b/dts/Bindings/iio/adc/avia-hx711.yaml
new file mode 100644
index 0000000000..8a4100ceea
--- /dev/null
+++ b/dts/Bindings/iio/adc/avia-hx711.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: AVIA HX711 ADC chip for weight cells
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  Bit-banging driver using two GPIOs:
+  - sck-gpio gives a clock to the sensor with 24 cycles for data retrieval
+    and up to 3 cycles for selection of the input channel and gain for the
+    next measurement
+  - dout-gpio is the sensor data the sensor responds to the clock
+
+  Specifications about the driver can be found at:
+  http://www.aviaic.com/ENProducts.aspx
+
+properties:
+  compatible:
+    enum:
+      - avia,hx711
+
+  sck-gpios:
+    description:
+      Definition of the GPIO for the clock (output). In the datasheet it is
+      named PD_SCK
+    maxItems: 1
+
+  dout-gpios:
+    description:
+      Definition of the GPIO for the data-out sent by the sensor in
+      response to the clock (input).
+      See Documentation/devicetree/bindings/gpio/gpio.txt for information
+      on how to specify a consumer gpio.
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog supply
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 20000
+    maximum: 2500000
+    default: 400000
+
+required:
+  - compatible
+  - sck-gpios
+  - dout-gpios
+  - avdd-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    weight {
+        compatible = "avia,hx711";
+        sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+        dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+        avdd-suppy = <&avdd>;
+        clock-frequency = <100000>;
+    };
diff --git a/dts/Bindings/iio/adc/imx7d-adc.txt b/dts/Bindings/iio/adc/imx7d-adc.txt
index 5c184b9406..f1f3a55245 100644
--- a/dts/Bindings/iio/adc/imx7d-adc.txt
+++ b/dts/Bindings/iio/adc/imx7d-adc.txt
@@ -10,6 +10,7 @@ Required properties:
 - clocks: The root clock of the ADC controller
 - clock-names: Must contain "adc", matching entry in the clocks property
 - vref-supply: The regulator supply ADC reference voltage
+- #io-channel-cells: Must be 1 as per ../iio-bindings.txt
 
 Example:
 adc1: adc@30610000 {
@@ -19,4 +20,5 @@ adc1: adc@30610000 {
 	clocks = <&clks IMX7D_ADC_ROOT_CLK>;
 	clock-names = "adc";
 	vref-supply = <&reg_vcc_3v3_mcu>;
+	#io-channel-cells = <1>;
 };
diff --git a/dts/Bindings/iio/adc/lpc32xx-adc.txt b/dts/Bindings/iio/adc/lpc32xx-adc.txt
index b3629d3a9a..3a1bc669bd 100644
--- a/dts/Bindings/iio/adc/lpc32xx-adc.txt
+++ b/dts/Bindings/iio/adc/lpc32xx-adc.txt
@@ -6,6 +6,10 @@ Required properties:
   region.
 - interrupts: The ADC interrupt
 
+Optional:
+ - vref-supply: The regulator supply ADC reference voltage, optional
+   for legacy reason, but highly encouraging to us in new device tree
+
 Example:
 
 	adc@40048000 {
@@ -13,4 +17,5 @@ Example:
 		reg = <0x40048000 0x1000>;
 		interrupt-parent = <&mic>;
 		interrupts = <39 0>;
+		vref-supply = <&vcc>;
 	};
diff --git a/dts/Bindings/iio/adc/qcom,spmi-vadc.txt b/dts/Bindings/iio/adc/qcom,spmi-vadc.txt
index c81993f8d8..c878768812 100644
--- a/dts/Bindings/iio/adc/qcom,spmi-vadc.txt
+++ b/dts/Bindings/iio/adc/qcom,spmi-vadc.txt
@@ -13,6 +13,7 @@ VADC node:
     Definition: Should contain "qcom,spmi-vadc".
                 Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
                 Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
+                Should contain "qcom,pms405-adc" for PMS405 PMIC
 
 - reg:
     Usage: required
diff --git a/dts/Bindings/iio/adc/ti-ads8344.txt b/dts/Bindings/iio/adc/ti-ads8344.txt
new file mode 100644
index 0000000000..e47c3759a8
--- /dev/null
+++ b/dts/Bindings/iio/adc/ti-ads8344.txt
@@ -0,0 +1,19 @@
+* Texas Instruments ADS8344 A/DC chip
+
+Required properties:
+ - compatible: Must be "ti,ads8344"
+ - reg: SPI chip select number for the device
+ - vref-supply: phandle to a regulator node that supplies the
+   reference voltage
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+	compatible = "ti,ads8344";
+	reg = <0>;
+	vref-supply = <&refin_supply>;
+	spi-max-frequency = <10000000>;
+};