diff options
| author | Sascha Hauer <s.hauer@pengutronix.de> | 2017-10-06 06:12:41 +0200 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2017-10-06 06:12:41 +0200 |
| commit | ebde8820a04dd73a09f50ba84b8cf8ec3773d6ba (patch) | |
| tree | 031d15dcd26f5b737adddc5042a3ddabbb6051f7 /dts/Bindings/iio/humidity/hts221.txt | |
| parent | 15af9fc8cc9e18409893d2375271d64cac76924a (diff) | |
| download | barebox-ebde8820a04dd73a09f50ba84b8cf8ec3773d6ba.tar.gz barebox-ebde8820a04dd73a09f50ba84b8cf8ec3773d6ba.tar.xz | |
dts: update to v4.14-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/iio/humidity/hts221.txt')
| -rw-r--r-- | dts/Bindings/iio/humidity/hts221.txt | 11 |
1 files changed, 10 insertions, 1 deletions
diff --git a/dts/Bindings/iio/humidity/hts221.txt b/dts/Bindings/iio/humidity/hts221.txt index b20ab9c120..10adeb0d70 100644 --- a/dts/Bindings/iio/humidity/hts221.txt +++ b/dts/Bindings/iio/humidity/hts221.txt @@ -5,9 +5,18 @@ Required properties: - reg: i2c address of the sensor / spi cs line Optional properties: +- drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. This is a boolean property. + If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or + IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line + when it is not active, whereas a pull-up one is needed when interrupt + line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. + Refer to pinctrl/pinctrl-bindings.txt for the property description. - interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ. It should be configured with - flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. + flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or + IRQ_TYPE_EDGE_FALLING. Refer to interrupt-controller/interrupts.txt for generic interrupt client node bindings. |