dts: update to v5.11-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

7 files changed, 166 insertions, 82 deletions

diff --git a/dts/Bindings/iio/pressure/hoperf,hp03.yaml b/dts/Bindings/iio/pressure/hoperf,hp03.yaml
new file mode 100644
index 0000000000..69a3759e23
--- /dev/null
+++ b/dts/Bindings/iio/pressure/hoperf,hp03.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HopeRF HP03 digital pressure/temperature sensors
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  Digital pressure and temperature sensor with an I2C interface.
+
+properties:
+  compatible:
+    const: hoperf,hp03
+
+  reg:
+    maxItems: 1
+
+  xclr-gpios:
+    description:
+      The XCLR pin is a reset of the ADC in the chip, it must be pulled
+      HI before the conversion and readout of the value from the ADC
+      registers and pulled LO afterward.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@77 {
+            compatible = "hoperf,hp03";
+            reg = <0x77>;
+            xclr-gpios = <&portc 0 0x0>;
+        };
+    };
+...
diff --git a/dts/Bindings/iio/pressure/hp03.txt b/dts/Bindings/iio/pressure/hp03.txt
deleted file mode 100644
index 831dbee7a5..0000000000
--- a/dts/Bindings/iio/pressure/hp03.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-HopeRF HP03 digital pressure/temperature sensors
-
-Required properties:
-- compatible: must be "hoperf,hp03"
-- xclr-gpio: must be device tree identifier of the XCLR pin.
-             The XCLR pin is a reset of the ADC in the chip,
-             it must be pulled HI before the conversion and
-             readout of the value from the ADC registers and
-             pulled LO afterward.
-
-Example:
-
-hp03@77 {
-	compatible = "hoperf,hp03";
-	reg = <0x77>;
-	xclr-gpio = <&portc 0 0x0>;
-};
diff --git a/dts/Bindings/iio/pressure/meas,ms5611.yaml b/dts/Bindings/iio/pressure/meas,ms5611.yaml
new file mode 100644
index 0000000000..4f06707450
--- /dev/null
+++ b/dts/Bindings/iio/pressure/meas,ms5611.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/meas,ms5611.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Measurement Specialities ms5611 and similar pressure sensors
+
+maintainers:
+  - Tomasz Duszynski <tduszyns@gmail.com>
+
+description: |
+  Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces.
+
+properties:
+  compatible:
+    enum:
+      - meas,ms5607
+      - meas,ms5611
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  spi-max-frequency:
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@77 {
+            compatible = "meas,ms5607";
+            reg = <0x77>;
+            vdd-supply = <&ldo_3v3_gnss>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure@0 {
+            compatible = "meas,ms5611";
+            reg = <0>;
+            vdd-supply = <&ldo_3v3_gnss>;
+        };
+    };
+...
diff --git a/dts/Bindings/iio/pressure/ms5611.txt b/dts/Bindings/iio/pressure/ms5611.txt
deleted file mode 100644
index 17bca866c0..0000000000
--- a/dts/Bindings/iio/pressure/ms5611.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-MEAS ms5611 family pressure sensors
-
-Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces.
-
-Required properties:
-- compatible: "meas,ms5611" or "meas,ms5607"
-- reg: the I2C address or SPI chip select the device will respond to
-
-Optional properties:
-- vdd-supply: an optional regulator that needs to be on to provide VDD
-  power to the sensor.
-
-Example:
-
-ms5607@77 {
-	compatible = "meas,ms5607";
-	reg = <0x77>;
-	vdd-supply = <&ldo_3v3_gnss>;
-};
diff --git a/dts/Bindings/iio/pressure/ms5637.txt b/dts/Bindings/iio/pressure/ms5637.txt
deleted file mode 100644
index 1f43ffa068..0000000000
--- a/dts/Bindings/iio/pressure/ms5637.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* MS5637 - Measurement-Specialties MS5637, MS5805, MS5837 and MS8607 pressure & temperature sensor
-
-Required properties:
-
-	-compatible: should be one of the following
-		meas,ms5637
-		meas,ms5805
-		meas,ms5837
-		meas,ms8607-temppressure
-	-reg: I2C address of the sensor
-
-Example:
-
-ms5637@76 {
-	compatible = "meas,ms5637";
-	reg = <0x76>;
-};
diff --git a/dts/Bindings/iio/pressure/murata,zpa2326.yaml b/dts/Bindings/iio/pressure/murata,zpa2326.yaml
new file mode 100644
index 0000000000..d6103be034
--- /dev/null
+++ b/dts/Bindings/iio/pressure/murata,zpa2326.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/murata,zpa2326.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Murata ZPA2326 pressure sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Pressure sensor from Murata with SPI and I2C bus interfaces.
+
+
+properties:
+  compatible:
+    const: murata,zpa2326
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vref-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@5c {
+            compatible = "murata,zpa2326";
+            reg = <0x5c>;
+            interrupt-parent = <&gpio>;
+            interrupts = <12>;
+            vdd-supply = <&ldo_1v8_gnss>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure@0 {
+            compatible = "murata,zpa2326";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+...
diff --git a/dts/Bindings/iio/pressure/zpa2326.txt b/dts/Bindings/iio/pressure/zpa2326.txt
deleted file mode 100644
index a36ab3e0c3..0000000000
--- a/dts/Bindings/iio/pressure/zpa2326.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Murata ZPA2326 pressure sensor
-
-Pressure sensor from Murata with SPI and I2C bus interfaces.
-
-Required properties:
-- compatible: "murata,zpa2326"
-- reg: the I2C address or SPI chip select the device will respond to
-
-Recommended properties for SPI bus usage:
-- spi-max-frequency: maximum SPI bus frequency as documented in
-  Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional properties:
-- vref-supply: an optional regulator that needs to be on to provide VREF
-  power to the sensor
-- vdd-supply: an optional regulator that needs to be on to provide VDD
-  power to the sensor
-- interrupts: interrupt mapping for IRQ as documented in
-  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Example:
-
-zpa2326@5c {
-	compatible = "murata,zpa2326";
-	reg = <0x5c>;
-	interrupt-parent = <&gpio>;
-	interrupts = <12>;
-	vdd-supply = <&ldo_1v8_gnss>;
-};