dts: update to v5.2-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2 files changed, 83 insertions, 0 deletions

diff --git a/dts/Bindings/input/touchscreen/goodix.txt b/dts/Bindings/input/touchscreen/goodix.txt
index 8cf0b4d38a..fc03ea4cf5 100644
--- a/dts/Bindings/input/touchscreen/goodix.txt
+++ b/dts/Bindings/input/touchscreen/goodix.txt
@@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen controller
 Required properties:
 
  - compatible		: Should be "goodix,gt1151"
+				 or "goodix,gt5663"
 				 or "goodix,gt5688"
 				 or "goodix,gt911"
 				 or "goodix,gt9110"
@@ -19,6 +20,8 @@ Optional properties:
  - irq-gpios		: GPIO pin used for IRQ. The driver uses the
 			  interrupt gpio pin as output to reset the device.
  - reset-gpios		: GPIO pin used for reset
+ - AVDD28-supply	: Analog power supply regulator on AVDD28 pin
+ - VDDIO-supply		: GPIO power supply regulator on VDDIO pin
  - touchscreen-inverted-x
  - touchscreen-inverted-y
  - touchscreen-size-x
diff --git a/dts/Bindings/input/touchscreen/iqs5xx.txt b/dts/Bindings/input/touchscreen/iqs5xx.txt
new file mode 100644
index 0000000000..efa0820e24
--- /dev/null
+++ b/dts/Bindings/input/touchscreen/iqs5xx.txt
@@ -0,0 +1,80 @@
+Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
+
+Required properties:
+
+- compatible			: Must be equal to one of the following:
+				  "azoteq,iqs550"
+				  "azoteq,iqs572"
+				  "azoteq,iqs525"
+
+- reg				: I2C slave address for the device.
+
+- interrupts			: GPIO to which the device's active-high RDY
+				  output is connected (see [0]).
+
+- reset-gpios			: GPIO to which the device's active-low NRST
+				  input is connected (see [1]).
+
+Optional properties:
+
+- touchscreen-min-x		: See [2].
+
+- touchscreen-min-y		: See [2].
+
+- touchscreen-size-x		: See [2]. If this property is omitted, the
+				  maximum x-coordinate is specified by the
+				  device's "X Resolution" register.
+
+- touchscreen-size-y		: See [2]. If this property is omitted, the
+				  maximum y-coordinate is specified by the
+				  device's "Y Resolution" register.
+
+- touchscreen-max-pressure	: See [2]. Pressure is expressed as the sum of
+				  the deltas across all channels impacted by a
+				  touch event. A channel's delta is calculated
+				  as its count value minus a reference, where
+				  the count value is inversely proportional to
+				  the channel's capacitance.
+
+- touchscreen-fuzz-x		: See [2].
+
+- touchscreen-fuzz-y		: See [2].
+
+- touchscreen-fuzz-pressure	: See [2].
+
+- touchscreen-inverted-x	: See [2]. Inversion is applied relative to that
+				  which may already be specified by the device's
+				  FLIP_X and FLIP_Y register fields.
+
+- touchscreen-inverted-y	: See [2]. Inversion is applied relative to that
+				  which may already be specified by the device's
+				  FLIP_X and FLIP_Y register fields.
+
+- touchscreen-swapped-x-y	: See [2]. Swapping is applied relative to that
+				  which may already be specified by the device's
+				  SWITCH_XY_AXIS register field.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/gpio/gpio.txt
+[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+
+Example:
+
+	&i2c1 {
+		/* ... */
+
+		touchscreen@74 {
+			compatible = "azoteq,iqs550";
+			reg = <0x74>;
+			interrupt-parent = <&gpio>;
+			interrupts = <17 4>;
+			reset-gpios = <&gpio 27 1>;
+
+			touchscreen-size-x = <640>;
+			touchscreen-size-y = <480>;
+
+			touchscreen-max-pressure = <16000>;
+		};
+
+		/* ... */
+	};