summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/input
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2014-09-01 09:47:17 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2014-09-02 11:01:29 +0200
commita595ff6eea05b919567f96d71e7e2c7b6236b8ac (patch)
tree2d7cea529b6a06be744116e29e8a97b0c8de1981 /dts/Bindings/input
parent7955f4315187665690f51e20698d4c12c68e008f (diff)
downloadbarebox-a595ff6eea05b919567f96d71e7e2c7b6236b8ac.tar.gz
barebox-a595ff6eea05b919567f96d71e7e2c7b6236b8ac.tar.xz
dts: update to v3.17-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/input')
-rw-r--r--dts/Bindings/input/atmel,maxtouch.txt25
-rw-r--r--dts/Bindings/input/cap1106.txt53
-rw-r--r--dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt26
-rw-r--r--dts/Bindings/input/touchscreen/zforce_ts.txt4
4 files changed, 108 insertions, 0 deletions
diff --git a/dts/Bindings/input/atmel,maxtouch.txt b/dts/Bindings/input/atmel,maxtouch.txt
new file mode 100644
index 0000000000..baef432e83
--- /dev/null
+++ b/dts/Bindings/input/atmel,maxtouch.txt
@@ -0,0 +1,25 @@
+Atmel maXTouch touchscreen/touchpad
+
+Required properties:
+- compatible:
+ atmel,maxtouch
+
+- reg: The I2C address of the device
+
+- interrupts: The sink for the touchpad's IRQ output
+ See ../interrupt-controller/interrupts.txt
+
+Optional properties for main touchpad device:
+
+- linux,gpio-keymap: An array of up to 4 entries indicating the Linux
+ keycode generated by each GPIO. Linux keycodes are defined in
+ <dt-bindings/input/input.h>.
+
+Example:
+
+ touch@4b {
+ compatible = "atmel,maxtouch";
+ reg = <0x4b>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+ };
diff --git a/dts/Bindings/input/cap1106.txt b/dts/Bindings/input/cap1106.txt
new file mode 100644
index 0000000000..4b463904cb
--- /dev/null
+++ b/dts/Bindings/input/cap1106.txt
@@ -0,0 +1,53 @@
+Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor
+
+The node for this driver must be a child of a I2C controller node, as the
+device communication via I2C only.
+
+Required properties:
+
+ compatible: Must be "microchip,cap1106"
+
+ reg: The I2C slave address of the device.
+ Only 0x28 is valid.
+
+ interrupts: Property describing the interrupt line the
+ device's ALERT#/CM_IRQ# pin is connected to.
+ The device only has one interrupt source.
+
+Optional properties:
+
+ autorepeat: Enables the Linux input system's autorepeat
+ feature on the input device.
+
+ microchip,sensor-gain: Defines the gain of the sensor circuitry. This
+ effectively controls the sensitivity, as a
+ smaller delta capacitance is required to
+ generate the same delta count values.
+ Valid values are 1, 2, 4, and 8.
+ By default, a gain of 1 is set.
+
+ linux,keycodes: Specifies an array of numeric keycode values to
+ be used for the channels. If this property is
+ omitted, KEY_A, KEY_B, etc are used as
+ defaults. The array must have exactly six
+ entries.
+
+Example:
+
+i2c_controller {
+ cap1106@28 {
+ compatible = "microchip,cap1106";
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 0>;
+ reg = <0x28>;
+ autorepeat;
+ microchip,sensor-gain = <2>;
+
+ linux,keycodes = <103 /* KEY_UP */
+ 106 /* KEY_RIGHT */
+ 108 /* KEY_DOWN */
+ 105 /* KEY_LEFT */
+ 109 /* KEY_PAGEDOWN */
+ 104>; /* KEY_PAGEUP */
+ };
+}
diff --git a/dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt b/dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt
new file mode 100644
index 0000000000..6e551090f4
--- /dev/null
+++ b/dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt
@@ -0,0 +1,26 @@
+* Pixcir I2C touchscreen controllers
+
+Required properties:
+- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- attb-gpio: GPIO connected to the ATTB line of the chip
+- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
+- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+
+Example:
+
+ i2c@00000000 {
+ /* ... */
+
+ pixcir_ts@5c {
+ compatible = "pixcir,pixcir_ts";
+ reg = <0x5c>;
+ interrupts = <2 0>;
+ attb-gpio = <&gpf 2 0 2>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <600>;
+ };
+
+ /* ... */
+ };
diff --git a/dts/Bindings/input/touchscreen/zforce_ts.txt b/dts/Bindings/input/touchscreen/zforce_ts.txt
index 2faf1f1fa3..80c37df940 100644
--- a/dts/Bindings/input/touchscreen/zforce_ts.txt
+++ b/dts/Bindings/input/touchscreen/zforce_ts.txt
@@ -9,6 +9,9 @@ Required properties:
- x-size: horizontal resolution of touchscreen
- y-size: vertical resolution of touchscreen
+Optional properties:
+- vdd-supply: Regulator controlling the controller supply
+
Example:
i2c@00000000 {
@@ -18,6 +21,7 @@ Example:
compatible = "neonode,zforce";
reg = <0x50>;
interrupts = <2 0>;
+ vdd-supply = <&reg_zforce_vdd>;
gpios = <&gpio5 6 0>, /* INT */
<&gpio5 9 0>; /* RST */