path: root/dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
diff options
authorSascha Hauer <>2019-12-19 05:46:54 +0100
committerSascha Hauer <>2019-12-19 05:46:54 +0100
commit574eed3f6fcf056aa4c9e46c4b5224e3f7844d8d (patch)
tree3fbe9ed379bc0d6c536860845e85a4ede4b36bbc /dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
parent179dedbc6d85d7ea7c8013513b364a75f32943e8 (diff)
dts: update to v5.5-rc1
Signed-off-by: Sascha Hauer <>
Diffstat (limited to 'dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt')
1 files changed, 11 insertions, 0 deletions
diff --git a/dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
index 2117d4a..5ddef1d 100644
--- a/dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ b/dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
@@ -31,6 +31,17 @@ Required properties:
- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
node; valid values depend on the type of parent interrupt controller
+Optional properties:
+- brcm,irq-can-wake: If present, this means the L1 controller can be used as a
+ wakeup source for system suspend/resume.
+Optional properties:
+- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts
+ have already been configured by the firmware and should be left unmanaged.
+ This should have one 32-bit word per status/set/clear/mask group.
If multiple reg ranges and interrupt-parent entries are present on an SMP
system, the driver will allow IRQ SMP affinity to be set up through the
/proc/irq/ interface. In the simplest possible configuration, only one