dts: update to v4.3-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

3 files changed, 196 insertions, 1 deletions

diff --git a/dts/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/dts/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
index 7da578d721..2d6c8bb4d8 100644
--- a/dts/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ b/dts/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -5,9 +5,14 @@ The BCM2835 contains a custom top-level interrupt controller, which supports
 controller, or the HW block containing it, is referred to occasionally
 as "armctrl" in the SoC documentation, hence naming of this binding.
 
+The BCM2836 contains the same interrupt controller with the same
+interrupts, but the per-CPU interrupt controller is the root, and an
+interrupt there indicates that the ARMCTRL has an interrupt to handle.
+
 Required properties:
 
-- compatible : should be "brcm,bcm2835-armctrl-ic"
+- compatible : should be "brcm,bcm2835-armctrl-ic" or
+                 "brcm,bcm2836-armctrl-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
@@ -20,6 +25,12 @@ Required properties:
   The 2nd cell contains the interrupt number within the bank. Valid values
   are 0..7 for bank 0, and 0..31 for bank 1.
 
+Additional required properties for brcm,bcm2836-armctrl-ic:
+- interrupt-parent : Specifies the parent interrupt controller when this
+  controller is the second level.
+- interrupts : Specifies the interrupt on the parent for this interrupt
+  controller to handle.
+
 The interrupt sources are as follows:
 
 Bank 0:
@@ -102,9 +113,21 @@ Bank 2:
 
 Example:
 
+/* BCM2835, first level */
 intc: interrupt-controller {
 	compatible = "brcm,bcm2835-armctrl-ic";
 	reg = <0x7e00b200 0x200>;
 	interrupt-controller;
 	#interrupt-cells = <2>;
 };
+
+/* BCM2836, second level */
+intc: interrupt-controller {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	interrupt-parent = <&local_intc>;
+	interrupts = <8>;
+};
diff --git a/dts/Bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/dts/Bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
new file mode 100644
index 0000000000..f320dcd6e6
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
@@ -0,0 +1,37 @@
+BCM2836 per-CPU interrupt controller
+
+The BCM2836 has a per-cpu interrupt controller for the timer, PMU
+events, and SMP IPIs.  One of the CPUs may receive interrupts for the
+peripheral (GPU) events, which chain to the BCM2835-style interrupt
+controller.
+
+Required properties:
+
+- compatible:	 	Should be "brcm,bcm2836-l1-intc"
+- reg:			Specifies base physical address and size of the
+			  registers
+- interrupt-controller:	Identifies the node as an interrupt controller
+- #interrupt-cells:	Specifies the number of cells needed to encode an
+			  interrupt source. The value shall be 1
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+The interrupt sources are as follows:
+
+0: CNTPSIRQ
+1: CNTPNSIRQ
+2: CNTHPIRQ
+3: CNTVIRQ
+8: GPU_FAST
+9: PMU_FAST
+
+Example:
+
+local_intc: local_intc {
+	compatible = "brcm,bcm2836-l1-intc";
+	reg = <0x40000000 0x100>;
+	interrupt-controller;
+	#interrupt-cells = <1>;
+	interrupt-parent = <&local_intc>;
+};
diff --git a/dts/Bindings/interrupt-controller/msi.txt b/dts/Bindings/interrupt-controller/msi.txt
new file mode 100644
index 0000000000..c60c034dcf
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/msi.txt
@@ -0,0 +1,135 @@
+This document describes the generic device tree binding for MSI controllers and
+their master(s).
+
+Message Signaled Interrupts (MSIs) are a class of interrupts generated by a
+write to an MMIO address.
+
+MSIs were originally specified by PCI (and are used with PCIe), but may also be
+used with other busses, and hence a mechanism is required to relate devices on
+those busses to the MSI controllers which they are capable of using,
+potentially including additional information.
+
+MSIs are distinguished by some combination of:
+
+- The doorbell (the MMIO address written to).
+  
+  Devices may be configured by software to write to arbitrary doorbells which
+  they can address. An MSI controller may feature a number of doorbells.
+
+- The payload (the value written to the doorbell).
+  
+  Devices may be configured to write an arbitrary payload chosen by software.
+  MSI controllers may have restrictions on permitted payloads.
+
+- Sideband information accompanying the write.
+  
+  Typically this is neither configurable nor probeable, and depends on the path
+  taken through the memory system (i.e. it is a property of the combination of
+  MSI controller and device rather than a property of either in isolation).
+
+
+MSI controllers:
+================
+
+An MSI controller signals interrupts to a CPU when a write is made to an MMIO
+address by some master. An MSI controller may feature a number of doorbells.
+
+Required properties:
+--------------------
+
+- msi-controller: Identifies the node as an MSI controller.
+
+Optional properties:
+--------------------
+
+- #msi-cells: The number of cells in an msi-specifier, required if not zero.
+
+  Typically this will encode information related to sideband data, and will
+  not encode doorbells or payloads as these can be configured dynamically.
+
+  The meaning of the msi-specifier is defined by the device tree binding of
+  the specific MSI controller. 
+
+
+MSI clients
+===========
+
+MSI clients are devices which generate MSIs. For each MSI they wish to
+generate, the doorbell and payload may be configured, though sideband
+information may not be configurable.
+
+Required properties:
+--------------------
+
+- msi-parent: A list of phandle + msi-specifier pairs, one for each MSI
+  controller which the device is capable of using.
+
+  This property is unordered, and MSIs may be allocated from any combination of
+  MSI controllers listed in the msi-parent property.
+
+  If a device has restrictions on the allocation of MSIs, these restrictions
+  must be described with additional properties.
+
+  When #msi-cells is non-zero, busses with an msi-parent will require
+  additional properties to describe the relationship between devices on the bus
+  and the set of MSIs they can potentially generate.
+
+
+Example
+=======
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi_a: msi-controller@a {
+		reg = <0xa 0xf00>;
+		compatible = "vendor-a,some-controller";
+		msi-controller;
+		/* No sideband data, so #msi-cells omitted */
+	};
+
+	msi_b: msi-controller@b {
+		reg = <0xb 0xf00>;
+		compatible = "vendor-b,another-controller";
+		msi-controller;
+		/* Each device has some unique ID */
+		#msi-cells = <1>;
+	};
+
+	msi_c: msi-controller@c {
+		reg = <0xb 0xf00>;
+		compatible = "vendor-b,another-controller";
+		msi-controller;
+		/* Each device has some unique ID */
+		#msi-cells = <1>;
+	};
+
+	dev@0 {
+		reg = <0x0 0xf00>;
+		compatible = "vendor-c,some-device";
+
+		/* Can only generate MSIs to msi_a */
+		msi-parent = <&msi_a>;
+	};
+
+	dev@1 {
+		reg = <0x1 0xf00>;
+		compatible = "vendor-c,some-device";
+
+		/* 
+		 * Can generate MSIs to either A or B.
+		 */
+		msi-parent = <&msi_a>, <&msi_b 0x17>;
+	};
+
+	dev@2 {
+		reg = <0x2 0xf00>;
+		compatible = "vendor-c,some-device";
+		/*
+		 * Has different IDs at each MSI controller.
+		 * Can generate MSIs to all of the MSI controllers.
+		 */
+		msi-parent = <&msi_a>, <&msi_b 0x17>, <&msi_c 0x53>;
+	};
+};