dts: update to v4.9-rc2

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2 files changed, 48 insertions, 0 deletions

diff --git a/dts/Bindings/ipmi/aspeed,ast2400-bt-bmc.txt b/dts/Bindings/ipmi/aspeed,ast2400-bt-bmc.txt
new file mode 100644
index 0000000000..fbbacd9582
--- /dev/null
+++ b/dts/Bindings/ipmi/aspeed,ast2400-bt-bmc.txt
@@ -0,0 +1,23 @@
+* Aspeed BT (Block Transfer) IPMI interface
+
+The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
+(BaseBoard Management Controllers) and the BT interface can be used to
+perform in-band IPMI communication with their host.
+
+Required properties:
+
+- compatible : should be "aspeed,ast2400-bt-bmc"
+- reg: physical address and size of the registers
+
+Optional properties:
+
+- interrupts: interrupt generated by the BT interface. without an
+  interrupt, the driver will operate in poll mode.
+
+Example:
+
+	ibt@1e789140 {
+		compatible = "aspeed,ast2400-bt-bmc";
+		reg = <0x1e789140 0x18>;
+		interrupts = <8>;
+	};
diff --git a/dts/Bindings/ipmi/ipmi-smic.txt b/dts/Bindings/ipmi/ipmi-smic.txt
new file mode 100644
index 0000000000..d5f1a877ed
--- /dev/null
+++ b/dts/Bindings/ipmi/ipmi-smic.txt
@@ -0,0 +1,25 @@
+IPMI device
+
+Required properties:
+- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt
+- device_type: should be ipmi
+- reg: Address and length of the register set for the device
+
+Optional properties:
+- interrupts: The interrupt for the device.  Without this the interface
+	is polled.
+- reg-size - The size of the register.  Defaults to 1
+- reg-spacing - The number of bytes between register starts.  Defaults to 1
+- reg-shift - The amount to shift the registers to the right to get the data
+	into bit zero.
+
+Example:
+
+smic@fff3a000 {
+	compatible = "ipmi-smic";
+	device_type = "ipmi";
+	reg = <0xfff3a000 0x1000>;
+	interrupts = <0 24 4>;
+	reg-size = <4>;
+	reg-spacing = <4>;
+};