summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/leds
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2018-09-11 08:26:30 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2018-09-11 17:23:13 +0200
commit35f607bc7da71b302fd6bf3d6d48d7ea66df1195 (patch)
treedd2cf14c56430d21079c794fa6e03d7f5d91070e /dts/Bindings/leds
parent625eea2765d94aee016cf25d9cabecde8eae0775 (diff)
downloadbarebox-35f607bc7da71b302fd6bf3d6d48d7ea66df1195.tar.gz
barebox-35f607bc7da71b302fd6bf3d6d48d7ea66df1195.tar.xz
dts: update to v4.19-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/leds')
-rw-r--r--dts/Bindings/leds/backlight/pwm-backlight.txt34
-rw-r--r--dts/Bindings/leds/common.txt2
-rw-r--r--dts/Bindings/leds/leds-lm3692x.txt5
-rw-r--r--dts/Bindings/leds/leds-lt3593.txt32
4 files changed, 64 insertions, 9 deletions
diff --git a/dts/Bindings/leds/backlight/pwm-backlight.txt b/dts/Bindings/leds/backlight/pwm-backlight.txt
index 310810906..64fa2fbd9 100644
--- a/dts/Bindings/leds/backlight/pwm-backlight.txt
+++ b/dts/Bindings/leds/backlight/pwm-backlight.txt
@@ -3,13 +3,6 @@ pwm-backlight bindings
Required properties:
- compatible: "pwm-backlight"
- pwms: OF device-tree PWM specification (see PWM binding[0])
- - brightness-levels: Array of distinct brightness levels. Typically these
- are in the range from 0 to 255, but any range starting at 0 will do.
- The actual brightness level (PWM duty cycle) will be interpolated
- from these values. 0 means a 0% duty cycle (darkest/off), while the
- last value in the array represents a 100% duty cycle (brightest).
- - default-brightness-level: the default brightness level (index into the
- array defined by the "brightness-levels" property)
- power-supply: regulator for supply voltage
Optional properties:
@@ -21,6 +14,19 @@ Optional properties:
and enabling the backlight using GPIO.
- pwm-off-delay-ms: Delay in ms between disabling the backlight using GPIO
and setting PWM value to 0.
+ - brightness-levels: Array of distinct brightness levels. Typically these
+ are in the range from 0 to 255, but any range starting at
+ 0 will do. The actual brightness level (PWM duty cycle)
+ will be interpolated from these values. 0 means a 0% duty
+ cycle (darkest/off), while the last value in the array
+ represents a 100% duty cycle (brightest).
+ - default-brightness-level: The default brightness level (index into the
+ array defined by the "brightness-levels" property).
+ - num-interpolated-steps: Number of interpolated steps between each value
+ of brightness-levels table. This way a high
+ resolution pwm duty cycle can be used without
+ having to list out every possible value in the
+ brightness-level array.
[0]: Documentation/devicetree/bindings/pwm/pwm.txt
[1]: Documentation/devicetree/bindings/gpio/gpio.txt
@@ -39,3 +45,17 @@ Example:
post-pwm-on-delay-ms = <10>;
pwm-off-delay-ms = <10>;
};
+
+Example using num-interpolation-steps:
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 2048 4096 8192 16384 65535>;
+ num-interpolated-steps = <2048>;
+ default-brightness-level = <4096>;
+
+ power-supply = <&vdd_bl_reg>;
+ enable-gpios = <&gpio 58 0>;
+ };
diff --git a/dts/Bindings/leds/common.txt b/dts/Bindings/leds/common.txt
index 1d4afe964..aa1399814 100644
--- a/dts/Bindings/leds/common.txt
+++ b/dts/Bindings/leds/common.txt
@@ -31,7 +31,7 @@ Optional properties for child nodes:
"backlight" - LED will act as a back-light, controlled by the framebuffer
system
"default-on" - LED will turn on (but for leds-gpio see "default-state"
- property in Documentation/devicetree/bindings/gpio/led.txt)
+ property in Documentation/devicetree/bindings/leds/leds-gpio.txt)
"heartbeat" - LED "double" flashes at a load average based rate
"disk-activity" - LED indicates disk activity
"ide-disk" - LED indicates IDE disk activity (deprecated),
diff --git a/dts/Bindings/leds/leds-lm3692x.txt b/dts/Bindings/leds/leds-lm3692x.txt
index 6c9074f84..08b352840 100644
--- a/dts/Bindings/leds/leds-lm3692x.txt
+++ b/dts/Bindings/leds/leds-lm3692x.txt
@@ -20,7 +20,10 @@ Optional properties:
- vled-supply : LED supply
Required child properties:
- - reg : 0
+ - reg : 0 - Will enable all LED sync paths
+ 1 - Will enable the LED1 sync
+ 2 - Will enable the LED2 sync
+ 3 - Will enable the LED3 sync (LM36923 only)
Optional child properties:
- label : see Documentation/devicetree/bindings/leds/common.txt
diff --git a/dts/Bindings/leds/leds-lt3593.txt b/dts/Bindings/leds/leds-lt3593.txt
new file mode 100644
index 000000000..6b2cabc36
--- /dev/null
+++ b/dts/Bindings/leds/leds-lt3593.txt
@@ -0,0 +1,32 @@
+Bindings for Linear Technologies LT3593 LED controller
+
+Required properties:
+- compatible: Should be "lltc,lt3593".
+- lltc,ctrl-gpios: A handle to the GPIO that is connected to the 'CTRL'
+ pin of the chip.
+
+The hardware supports only one LED. The properties of this LED are
+configured in a sub-node in the device node.
+
+Optional sub-node properties:
+- label: A label for the LED. If none is given, the LED will be
+ named "lt3595::".
+- linux,default-trigger: The default trigger for the LED.
+ See Documentation/devicetree/bindings/leds/common.txt
+- default-state: The initial state of the LED.
+ See Documentation/devicetree/bindings/leds/common.txt
+
+If multiple chips of this type are found in a design, each one needs to
+be handled by its own device node.
+
+Example:
+
+led-controller {
+ compatible = "lltc,lt3593";
+ lltc,ctrl-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+
+ led {
+ label = "white:backlight";
+ default-state = "on";
+ };
+};