dts: update to v4.12-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 132 insertions, 0 deletions

diff --git a/dts/Bindings/leds/backlight/arcxcnn_bl.txt b/dts/Bindings/leds/backlight/arcxcnn_bl.txt
new file mode 100644
index 0000000000..230abdefd6
--- /dev/null
+++ b/dts/Bindings/leds/backlight/arcxcnn_bl.txt
@@ -0,0 +1,33 @@
+Binding for ArcticSand arc2c0608 LED driver
+
+Required properties:
+- compatible:		should be "arc,arc2c0608"
+- reg:			slave address
+
+Optional properties:
+- default-brightness:	brightness value on boot, value from: 0-4095
+- label:		The name of the backlight device
+			See Documentation/devicetree/bindings/leds/common.txt
+- led-sources:		List of enabled channels from 0 to 5.
+			See Documentation/devicetree/bindings/leds/common.txt
+
+- arc,led-config-0:	setting for register ILED_CONFIG_0
+- arc,led-config-1:	setting for register ILED_CONFIG_1
+- arc,dim-freq:		PWM mode frequence setting (bits [3:0] used)
+- arc,comp-config:	setting for register CONFIG_COMP
+- arc,filter-config:	setting for register FILTER_CONFIG
+- arc,trim-config:	setting for register IMAXTUNE
+
+Note: Optional properties not specified will default to values in IC EPROM
+
+Example:
+
+arc2c0608@30 {
+	compatible = "arc,arc2c0608";
+	reg = <0x30>;
+	default-brightness = <500>;
+	label = "lcd-backlight";
+	linux,default-trigger = "backlight";
+	led-sources = <0 1 2 5>;
+};
+
diff --git a/dts/Bindings/leds/leds-cpcap.txt b/dts/Bindings/leds/leds-cpcap.txt
new file mode 100644
index 0000000000..ebf7cdc7f7
--- /dev/null
+++ b/dts/Bindings/leds/leds-cpcap.txt
@@ -0,0 +1,29 @@
+Motorola CPCAP PMIC LEDs
+------------------------
+
+This module is part of the CPCAP. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt.
+
+Requires node properties:
+- compatible: should be one of
+   * "motorola,cpcap-led-mdl"		(Main Display Lighting)
+   * "motorola,cpcap-led-kl"		(Keyboard Lighting)
+   * "motorola,cpcap-led-adl"		(Aux Display Lighting)
+   * "motorola,cpcap-led-red"		(Red Triode)
+   * "motorola,cpcap-led-green"		(Green Triode)
+   * "motorola,cpcap-led-blue"		(Blue Triode)
+   * "motorola,cpcap-led-cf"		(Camera Flash)
+   * "motorola,cpcap-led-bt"		(Bluetooth)
+   * "motorola,cpcap-led-cp"		(Camera Privacy LED)
+- label: see Documentation/devicetree/bindings/leds/common.txt
+- vdd-supply: A phandle to the regulator powering the LED
+
+Example:
+
+&cpcap {
+	cpcap_led_red: red-led {
+		compatible = "motorola,cpcap-led-red";
+		label = "cpcap:red";
+		vdd-supply = <&sw5>;
+	};
+};
diff --git a/dts/Bindings/leds/leds-mt6323.txt b/dts/Bindings/leds/leds-mt6323.txt
new file mode 100644
index 0000000000..45bf9f7d85
--- /dev/null
+++ b/dts/Bindings/leds/leds-mt6323.txt
@@ -0,0 +1,60 @@
+Device Tree Bindings for LED support on MT6323 PMIC
+
+MT6323 LED controller is subfunction provided by MT6323 PMIC, so the LED
+controllers are defined as the subnode of the function node provided by MT6323
+PMIC controller that is being defined as one kind of Muti-Function Device (MFD)
+using shared bus called PMIC wrapper for each subfunction to access remote
+MT6323 PMIC hardware.
+
+For MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+For MediaTek PMIC wrapper bindings see:
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+
+Required properties:
+- compatible : Must be "mediatek,mt6323-led"
+- address-cells : Must be 1
+- size-cells : Must be 0
+
+Each led is represented as a child node of the mediatek,mt6323-led that
+describes the initial behavior for each LED physically and currently only four
+LED child nodes can be supported.
+
+Required properties for the LED child node:
+- reg : LED channel number (0..3)
+
+Optional properties for the LED child node:
+- label : See Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : See Documentation/devicetree/bindings/leds/common.txt
+- default-state: See Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+	mt6323: pmic {
+		compatible = "mediatek,mt6323";
+
+		...
+
+		mt6323led: leds {
+			compatible = "mediatek,mt6323-led";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				label = "LED0";
+				linux,default-trigger = "timer";
+				default-state = "on";
+			};
+			led@1 {
+				reg = <1>;
+				label = "LED1";
+				default-state = "off";
+			};
+			led@2 {
+				reg = <2>;
+				label = "LED2";
+				default-state = "on";
+			};
+		};
+	};
diff --git a/dts/Bindings/leds/leds-pca9532.txt b/dts/Bindings/leds/leds-pca9532.txt
index 198f3ba0e0..f769c52e36 100644
--- a/dts/Bindings/leds/leds-pca9532.txt
+++ b/dts/Bindings/leds/leds-pca9532.txt
@@ -17,6 +17,8 @@ Optional sub-node properties:
 	- label: see Documentation/devicetree/bindings/leds/common.txt
 	- type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE)
 	- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
+	- default-state: see Documentation/devicetree/bindings/leds/common.txt
+	  This property is only valid for sub-nodes of type <PCA9532_TYPE_LED>.
 
 Example:
   #include <dt-bindings/leds/leds-pca9532.h>
@@ -33,6 +35,14 @@ Example:
       label = "pca:green:power";
       type = <PCA9532_TYPE_LED>;
     };
+    kernel-booting {
+      type = <PCA9532_TYPE_LED>;
+      default-state = "on";
+    };
+    sys-stat {
+      type = <PCA9532_TYPE_LED>;
+      default-state = "keep"; // don't touch, was set by U-Boot
+    };
   };
 
 For more product information please see the link below: