summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/leds
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2016-10-18 10:10:24 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2016-10-18 10:10:24 +0200
commitbfbf18d991756858337f7700e8ff0a6f0dc31afc (patch)
treecf3568de4fdff1891e277507f08f49a871682706 /dts/Bindings/leds
parent834f6bf5e5f1169065376ad1aeb6a6266e66ce5c (diff)
downloadbarebox-bfbf18d991756858337f7700e8ff0a6f0dc31afc.tar.gz
barebox-bfbf18d991756858337f7700e8ff0a6f0dc31afc.tar.xz
dts: update to v4.9-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/leds')
-rw-r--r--dts/Bindings/leds/common.txt7
-rw-r--r--dts/Bindings/leds/leds-bcm6328.txt2
-rw-r--r--dts/Bindings/leds/leds-bcm6358.txt2
-rw-r--r--dts/Bindings/leds/leds-gpio.txt9
-rw-r--r--dts/Bindings/leds/leds-is31fl319x.txt59
-rw-r--r--dts/Bindings/leds/leds-pm8058.txt67
-rw-r--r--dts/Bindings/leds/register-bit-led.txt9
7 files changed, 139 insertions, 16 deletions
diff --git a/dts/Bindings/leds/common.txt b/dts/Bindings/leds/common.txt
index 93ef6e6e4..696be5792 100644
--- a/dts/Bindings/leds/common.txt
+++ b/dts/Bindings/leds/common.txt
@@ -19,6 +19,13 @@ Optional properties for child nodes:
a device, i.e. no other LED class device can be assigned the same
label.
+- default-state : The initial state of the LED. Valid values are "on", "off",
+ and "keep". If the LED is already on or off and the default-state property is
+ set the to same value, then no glitch should be produced where the LED
+ momentarily turns off (or on). The "keep" setting will keep the LED at
+ whatever its current state is, without producing a glitch. The default is
+ off if this property is not present.
+
- linux,default-trigger : This parameter, if present, is a
string defining the trigger assigned to the LED. Current triggers are:
"backlight" - LED will act as a back-light, controlled by the framebuffer
diff --git a/dts/Bindings/leds/leds-bcm6328.txt b/dts/Bindings/leds/leds-bcm6328.txt
index 3f48c1eaf..ccebce597 100644
--- a/dts/Bindings/leds/leds-bcm6328.txt
+++ b/dts/Bindings/leds/leds-bcm6328.txt
@@ -49,7 +49,7 @@ LED sub-node optional properties:
- active-low : Boolean, makes LED active low.
Default : false
- default-state : see
- Documentation/devicetree/bindings/leds/leds-gpio.txt
+ Documentation/devicetree/bindings/leds/common.txt
- linux,default-trigger : see
Documentation/devicetree/bindings/leds/common.txt
diff --git a/dts/Bindings/leds/leds-bcm6358.txt b/dts/Bindings/leds/leds-bcm6358.txt
index b22a55bcc..da5708e7b 100644
--- a/dts/Bindings/leds/leds-bcm6358.txt
+++ b/dts/Bindings/leds/leds-bcm6358.txt
@@ -28,7 +28,7 @@ LED sub-node optional properties:
- active-low : Boolean, makes LED active low.
Default : false
- default-state : see
- Documentation/devicetree/bindings/leds/leds-gpio.txt
+ Documentation/devicetree/bindings/leds/common.txt
- linux,default-trigger : see
Documentation/devicetree/bindings/leds/common.txt
diff --git a/dts/Bindings/leds/leds-gpio.txt b/dts/Bindings/leds/leds-gpio.txt
index 5b1b43a64..76535ca37 100644
--- a/dts/Bindings/leds/leds-gpio.txt
+++ b/dts/Bindings/leds/leds-gpio.txt
@@ -14,13 +14,8 @@ LED sub-node properties:
see Documentation/devicetree/bindings/leds/common.txt
- linux,default-trigger : (optional)
see Documentation/devicetree/bindings/leds/common.txt
-- default-state: (optional) The initial state of the LED. Valid
- values are "on", "off", and "keep". If the LED is already on or off
- and the default-state property is set the to same value, then no
- glitch should be produced where the LED momentarily turns off (or
- on). The "keep" setting will keep the LED at whatever its current
- state is, without producing a glitch. The default is off if this
- property is not present.
+- default-state: (optional) The initial state of the LED.
+ see Documentation/devicetree/bindings/leds/common.txt
- retain-state-suspended: (optional) The suspend state can be retained.Such
as charge-led gpio.
- panic-indicator : (optional)
diff --git a/dts/Bindings/leds/leds-is31fl319x.txt b/dts/Bindings/leds/leds-is31fl319x.txt
new file mode 100644
index 000000000..fc2603484
--- /dev/null
+++ b/dts/Bindings/leds/leds-is31fl319x.txt
@@ -0,0 +1,59 @@
+LEDs connected to is31fl319x LED controller chip
+
+Required properties:
+- compatible : Should be any of
+ "issi,is31fl3190"
+ "issi,is31fl3191"
+ "issi,is31fl3193"
+ "issi,is31fl3196"
+ "issi,is31fl3199"
+ "si-en,sn3199".
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+- reg: 0x64, 0x65, 0x66, or 0x67.
+
+Optional properties:
+- audio-gain-db : audio gain selection for external analog modulation input.
+ Valid values: 0 - 21, step by 3 (rounded down)
+ Default: 0
+
+Each led is represented as a sub-node of the issi,is31fl319x device.
+There can be less leds subnodes than the chip can support but not more.
+
+Required led sub-node properties:
+- reg : number of LED line
+ Valid values: 1 - number of leds supported by the chip variant.
+
+Optional led sub-node properties:
+- label : see Documentation/devicetree/bindings/leds/common.txt.
+- linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt.
+- led-max-microamp : (optional)
+ Valid values: 5000 - 40000, step by 5000 (rounded down)
+ Default: 20000 (20 mA)
+ Note: a driver will take the lowest of all led limits since the
+ chip has a single global setting. The lowest value will be chosen
+ due to the PWM specificity, where lower brightness is achieved
+ by reducing the dury-cycle of pulses and not the current, which
+ will always have its peak value equal to led-max-microamp.
+
+Examples:
+
+fancy_leds: leds@65 {
+ compatible = "issi,is31fl3196";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x65>;
+
+ red_aux: led@1 {
+ label = "red:aux";
+ reg = <1>;
+ led-max-microamp = <10000>;
+ };
+
+ green_power: led@5 {
+ label = "green:power";
+ reg = <5>;
+ linux,default-trigger = "default-on";
+ };
+};
diff --git a/dts/Bindings/leds/leds-pm8058.txt b/dts/Bindings/leds/leds-pm8058.txt
new file mode 100644
index 000000000..89584c49a
--- /dev/null
+++ b/dts/Bindings/leds/leds-pm8058.txt
@@ -0,0 +1,67 @@
+Qualcomm PM8058 LED driver
+
+The Qualcomm PM8058 is a multi-functional device which contains
+an LED driver block for up to six LEDs: three normal LEDs, two
+"flash" LEDs and one "keypad backlight" LED. The names are
+quoted because sometimes these LED drivers are used for wildly
+different things than flash or keypad backlight: their names
+are more of a suggestion than a hard-wired usecase.
+
+Hardware-wise the different LEDs support slightly different
+output currents. The "flash" LEDs do not need to charge nor
+do they support external triggers. They are just powerful LED
+drivers.
+
+The LEDs appear as children to the PM8058 device, with the
+proper compatible string. For the PM8058 bindings see:
+mfd/qcom-pm8xxx.txt.
+
+Each LED is represented as a sub-node of the syscon device. Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+
+Required properties:
+- compatible: one of
+ "qcom,pm8058-led" (for the normal LEDs at 0x131, 0x132 and 0x133)
+ "qcom,pm8058-keypad-led" (for the "keypad" LED at 0x48)
+ "qcom,pm8058-flash-led" (for the "flash" LEDs at 0x49 and 0xFB)
+
+Optional properties:
+- label: see Documentation/devicetree/bindings/leds/common.txt
+- default-state: see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+qcom,ssbi@500000 {
+ pmicintc: pmic@0 {
+ compatible = "qcom,pm8058";
+ led@48 {
+ compatible = "qcom,pm8058-keypad-led";
+ reg = <0x48>;
+ label = "pm8050:white:keypad";
+ default-state = "off";
+ };
+ led@131 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x131>;
+ label = "pm8058:red";
+ default-state = "off";
+ };
+ led@132 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x132>;
+ label = "pm8058:yellow";
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+ led@133 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x133>;
+ label = "pm8058:green";
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/dts/Bindings/leds/register-bit-led.txt b/dts/Bindings/leds/register-bit-led.txt
index 379cefdc0..59b56365f 100644
--- a/dts/Bindings/leds/register-bit-led.txt
+++ b/dts/Bindings/leds/register-bit-led.txt
@@ -23,13 +23,8 @@ Optional properties:
see Documentation/devicetree/bindings/leds/common.txt
- linux,default-trigger : (optional)
see Documentation/devicetree/bindings/leds/common.txt
-- default-state: (optional) The initial state of the LED. Valid
- values are "on", "off", and "keep". If the LED is already on or off
- and the default-state property is set the to same value, then no
- glitch should be produced where the LED momentarily turns off (or
- on). The "keep" setting will keep the LED at whatever its current
- state is, without producing a glitch. The default is off if this
- property is not present.
+- default-state: (optional) The initial state of the LED
+ see Documentation/devicetree/bindings/leds/common.txt
Example: