dts: update to v4.8-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 46 insertions, 3 deletions

diff --git a/dts/Bindings/leds/backlight/lp855x.txt b/dts/Bindings/leds/backlight/lp855x.txt
index 0a3ecbc3a1..88f56641fc 100644
--- a/dts/Bindings/leds/backlight/lp855x.txt
+++ b/dts/Bindings/leds/backlight/lp855x.txt
@@ -13,6 +13,7 @@ Optional properties:
   - rom-addr: Register address of ROM area to be updated (u8)
   - rom-val: Register value to be updated (u8)
   - power-supply: Regulator which controls the 3V rail
+  - enable-supply: Regulator which controls the EN/VDDIO input
 
 Example:
 
@@ -57,6 +58,7 @@ Example:
 	backlight@2c {
 		compatible = "ti,lp8557";
 		reg = <0x2c>;
+		enable-supply = <&backlight_vddio>;
 		power-supply = <&backlight_vdd>;
 
 		dev-ctrl = /bits/ 8 <0x41>;
diff --git a/dts/Bindings/leds/common.txt b/dts/Bindings/leds/common.txt
index af10678ea2..93ef6e6e43 100644
--- a/dts/Bindings/leds/common.txt
+++ b/dts/Bindings/leds/common.txt
@@ -26,7 +26,9 @@ Optional properties for child nodes:
      "default-on" - LED will turn on (but for leds-gpio see "default-state"
 		    property in Documentation/devicetree/bindings/gpio/led.txt)
      "heartbeat" - LED "double" flashes at a load average based rate
-     "ide-disk" - LED indicates disk activity
+     "disk-activity" - LED indicates disk activity
+     "ide-disk" - LED indicates IDE disk activity (deprecated),
+                  in new implementations use "disk-activity"
      "timer" - LED flashes at a fixed, configurable rate
 
 - led-max-microamp : Maximum LED supply current in microamperes. This property
diff --git a/dts/Bindings/leds/leds-gpio.txt b/dts/Bindings/leds/leds-gpio.txt
index cbbeb18509..5b1b43a642 100644
--- a/dts/Bindings/leds/leds-gpio.txt
+++ b/dts/Bindings/leds/leds-gpio.txt
@@ -33,9 +33,9 @@ Examples:
 leds {
 	compatible = "gpio-leds";
 	hdd {
-		label = "IDE Activity";
+		label = "Disk Activity";
 		gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
-		linux,default-trigger = "ide-disk";
+		linux,default-trigger = "disk-activity";
 	};
 
 	fault {
diff --git a/dts/Bindings/leds/leds-pca9532.txt b/dts/Bindings/leds/leds-pca9532.txt
new file mode 100644
index 0000000000..198f3ba0e0
--- /dev/null
+++ b/dts/Bindings/leds/leds-pca9532.txt
@@ -0,0 +1,39 @@
+*NXP - pca9532 PWM LED Driver
+
+The PCA9532 family is SMBus I/O expander optimized for dimming LEDs.
+The PWM support 256 steps.
+
+Required properties:
+	- compatible:
+		"nxp,pca9530"
+		"nxp,pca9531"
+		"nxp,pca9532"
+		"nxp,pca9533"
+	- reg -  I2C slave address
+
+Each led is represented as a sub-node of the nxp,pca9530.
+
+Optional sub-node properties:
+	- label: see Documentation/devicetree/bindings/leds/common.txt
+	- type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE)
+	- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+  #include <dt-bindings/leds/leds-pca9532.h>
+
+  leds: pca9530@60 {
+    compatible = "nxp,pca9530";
+    reg = <0x60>;
+
+    red-power {
+      label = "pca:red:power";
+      type = <PCA9532_TYPE_LED>;
+    };
+    green-power {
+      label = "pca:green:power";
+      type = <PCA9532_TYPE_LED>;
+    };
+  };
+
+For more product information please see the link below:
+http://nxp.com/documents/data_sheet/PCA9532.pdf