diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2018-09-11 08:26:30 +0200 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2018-09-11 17:23:13 +0200 |
commit | 35f607bc7da71b302fd6bf3d6d48d7ea66df1195 (patch) | |
tree | dd2cf14c56430d21079c794fa6e03d7f5d91070e /dts/Bindings/media/i2c/ov2680.txt | |
parent | 625eea2765d94aee016cf25d9cabecde8eae0775 (diff) | |
download | barebox-35f607bc7da71b302fd6bf3d6d48d7ea66df1195.tar.gz barebox-35f607bc7da71b302fd6bf3d6d48d7ea66df1195.tar.xz |
dts: update to v4.19-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/media/i2c/ov2680.txt')
-rw-r--r-- | dts/Bindings/media/i2c/ov2680.txt | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/dts/Bindings/media/i2c/ov2680.txt b/dts/Bindings/media/i2c/ov2680.txt new file mode 100644 index 0000000000..11e925ed9d --- /dev/null +++ b/dts/Bindings/media/i2c/ov2680.txt @@ -0,0 +1,46 @@ +* Omnivision OV2680 MIPI CSI-2 sensor + +Required Properties: +- compatible: should be "ovti,ov2680". +- clocks: reference to the xvclk input clock. +- clock-names: should be "xvclk". +- DOVDD-supply: Digital I/O voltage supply. +- DVDD-supply: Digital core voltage supply. +- AVDD-supply: Analog voltage supply. + +Optional Properties: +- reset-gpios: reference to the GPIO connected to the powerdown/reset pin, + if any. This is an active low signal to the OV2680. + +The device node must contain one 'port' child node for its digital output +video port, and this port must have a single endpoint in accordance with + the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Endpoint node required properties for CSI-2 connection are: +- remote-endpoint: a phandle to the bus receiver's endpoint node. +- clock-lanes: should be set to <0> (clock lane on hardware lane 0). +- data-lanes: should be set to <1> (one CSI-2 lane supported). + +Example: + +&i2c2 { + ov2680: camera-sensor@36 { + compatible = "ovti,ov2680"; + reg = <0x36>; + clocks = <&osc>; + clock-names = "xvclk"; + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + DOVDD-supply = <&sw2_reg>; + DVDD-supply = <&sw2_reg>; + AVDD-supply = <®_peri_3p15v>; + + port { + ov2680_to_mipi: endpoint { + remote-endpoint = <&mipi_from_sensor>; + clock-lanes = <0>; + data-lanes = <1>; + }; + }; + }; +}; |