summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/media/i2c/tvp5150.txt
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2016-06-13 07:29:57 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2016-06-13 07:29:57 +0200
commita4f4bc65b33164eb8c19bcff9834cc87bcc845bb (patch)
treeef97762be5b614f160e9affddd1bbbec43c007dc /dts/Bindings/media/i2c/tvp5150.txt
parent83e61900b02965d01f0885e2db2077df35be7f56 (diff)
downloadbarebox-a4f4bc65b33164eb8c19bcff9834cc87bcc845bb.tar.gz
dts: update to v4.6-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/media/i2c/tvp5150.txt')
-rw-r--r--dts/Bindings/media/i2c/tvp5150.txt45
1 files changed, 45 insertions, 0 deletions
diff --git a/dts/Bindings/media/i2c/tvp5150.txt b/dts/Bindings/media/i2c/tvp5150.txt
new file mode 100644
index 0000000..8c0fc1a
--- /dev/null
+++ b/dts/Bindings/media/i2c/tvp5150.txt
@@ -0,0 +1,45 @@
+* Texas Instruments TVP5150 and TVP5151 video decoders
+
+The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL
+(and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV
+with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats.
+
+Required Properties:
+- compatible: value must be "ti,tvp5150"
+- reg: I2C slave address
+
+Optional Properties:
+- pdn-gpios: phandle for the GPIO connected to the PDN pin, if any.
+- reset-gpios: phandle for the GPIO connected to the RESETB pin, if any.
+
+The device node must contain one 'port' child node for its digital output
+video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Required Endpoint Properties for parallel synchronization:
+
+- hsync-active: active state of the HSYNC signal. Must be <1> (HIGH).
+- vsync-active: active state of the VSYNC signal. Must be <1> (HIGH).
+- field-even-active: field signal level during the even field data
+ transmission. Must be <0>.
+
+If none of hsync-active, vsync-active and field-even-active is specified,
+the endpoint is assumed to use embedded BT.656 synchronization.
+
+Example:
+
+&i2c2 {
+ ...
+ tvp5150@5c {
+ compatible = "ti,tvp5150";
+ reg = <0x5c>;
+ pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+
+ port {
+ tvp5150_1: endpoint {
+ remote-endpoint = <&ccdc_ep>;
+ };
+ };
+ };
+};