dts: update to v5.0-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2 files changed, 62 insertions, 4 deletions

diff --git a/dts/Bindings/media/i2c/mt9m111.txt b/dts/Bindings/media/i2c/mt9m111.txt
index 6b910036b5..d0bed6fa90 100644
--- a/dts/Bindings/media/i2c/mt9m111.txt
+++ b/dts/Bindings/media/i2c/mt9m111.txt
@@ -9,8 +9,14 @@ Required Properties:
 - clocks: reference to the master clock.
 - clock-names: shall be "mclk".
 
-For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Optional endpoint properties:
+- pclk-sample: For information see ../video-interfaces.txt. The value is set to
+  0 if it isn't specified.
 
 Example:
 
@@ -21,11 +27,10 @@ Example:
 			clocks = <&mclk>;
 			clock-names = "mclk";
 
-			remote = <&pxa_camera>;
 			port {
 				mt9m111_1: endpoint {
-					bus-width = <8>;
 					remote-endpoint = <&pxa_camera>;
+					pclk-sample = <1>;
 				};
 			};
 		};
diff --git a/dts/Bindings/media/i2c/sony,imx214.txt b/dts/Bindings/media/i2c/sony,imx214.txt
new file mode 100644
index 0000000000..f11f28a5fd
--- /dev/null
+++ b/dts/Bindings/media/i2c/sony,imx214.txt
@@ -0,0 +1,53 @@
+* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor
+
+The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with
+an active array size of 4224H x 3200V. It is programmable through an I2C
+interface.
+Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum
+throughput of 1.2Gbps/lane.
+
+
+Required Properties:
+- compatible: Shall be "sony,imx214".
+- reg: I2C bus address of the device. Depending on how the sensor is wired,
+       it shall be <0x10> or <0x1a>;
+- enable-gpios: GPIO descriptor for the enable pin.
+- vdddo-supply: Chip digital IO regulator (1.8V).
+- vdda-supply: Chip analog regulator (2.7V).
+- vddd-supply: Chip digital core regulator (1.12V).
+- clocks: Reference to the xclk clock.
+- clock-frequency: Frequency of the xclk clock.
+
+Optional Properties:
+- flash-leds: See ../video-interfaces.txt
+- lens-focus: See ../video-interfaces.txt
+
+The imx214 device node shall contain one 'port' child node with
+an 'endpoint' subnode. For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Required Properties on endpoint:
+- data-lanes: check ../video-interfaces.txt
+- link-frequencies: check ../video-interfaces.txt
+- remote-endpoint: check ../video-interfaces.txt
+
+Example:
+
+	camera-sensor@1a {
+		compatible = "sony,imx214";
+		reg = <0x1a>;
+		vdddo-supply = <&pm8994_lvs1>;
+		vddd-supply = <&camera_vddd_1v12>;
+		vdda-supply = <&pm8994_l17>;
+		lens-focus = <&ad5820>;
+		enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+		clocks = <&mmcc CAMSS_MCLK0_CLK>;
+		clock-frequency = <24000000>;
+		port {
+			imx214_ep: endpoint {
+				data-lanes = <1 2 3 4>;
+				link-frequencies = /bits/ 64 <480000000>;
+				remote-endpoint = <&csiphy0_ep>;
+			};
+		};
+	};