diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2017-11-28 11:02:14 +0100 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2017-11-28 11:06:44 +0100 |
commit | 2e9cce8fb1f577088e2b20ae2f461130e13ad190 (patch) | |
tree | f82ae53e88d36e07608be1b3159da296ed025ef1 /dts/Bindings/media/video-interfaces.txt | |
parent | c68d466d263827692aa809e6b34abb90a1cab515 (diff) | |
download | barebox-2e9cce8fb1f577088e2b20ae2f461130e13ad190.tar.gz barebox-2e9cce8fb1f577088e2b20ae2f461130e13ad190.tar.xz |
dts: update to v4.15-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/media/video-interfaces.txt')
-rw-r--r-- | dts/Bindings/media/video-interfaces.txt | 24 |
1 files changed, 23 insertions, 1 deletions
diff --git a/dts/Bindings/media/video-interfaces.txt b/dts/Bindings/media/video-interfaces.txt index 852041a748..3994b0143d 100644 --- a/dts/Bindings/media/video-interfaces.txt +++ b/dts/Bindings/media/video-interfaces.txt @@ -55,6 +55,15 @@ divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width and data-shift properties can be used to assign physical data lines to each endpoint node (logical bus). +Documenting bindings for devices +-------------------------------- + +All required and optional bindings the device supports shall be explicitly +documented in device DT binding documentation. This also includes port and +endpoint nodes for the device, including unit-addresses and reg properties where +relevant. + +Please also see Documentation/devicetree/bindings/graph.txt . Required properties ------------------- @@ -67,6 +76,16 @@ are required in a relevant parent node: identifier, should be 1. - #size-cells : should be zero. + +Optional properties +------------------- + +- flash-leds: An array of phandles, each referring to a flash LED, a sub-node + of the LED driver device node. + +- lens-focus: A phandle to the node of the focus lens controller. + + Optional endpoint properties ---------------------------- @@ -99,7 +118,10 @@ Optional endpoint properties determines the logical lane number, while the value of an entry indicates physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0. - This property is valid for serial busses only (e.g. MIPI CSI-2). + If the hardware does not support lane reordering, monotonically + incremented values shall be used from 0 or 1 onwards, depending on + whether or not there is also a clock lane. This property is valid for + serial busses only (e.g. MIPI CSI-2). - clock-lanes: an array of physical clock lane indexes. Position of an entry determines the logical lane number, while the value of an entry indicates physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;", |