summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/media
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2014-04-25 11:22:32 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2014-04-28 09:08:46 +0200
commit00ce25c6dcdae5582ae4be37147ab33678adc995 (patch)
tree41c93102ae304a61738c31353e3cb5336ef0b297 /dts/Bindings/media
parent0af79fbb6779921d3f1962773adb7fb57d3c89d4 (diff)
downloadbarebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.gz
Add devicetree source files as of Linux-3.15-rc2
This adds the Linux dts files to barebox. The dts files are generated from Ian Campbells device-tree-rebasing.git: git://xenbits.xen.org/people/ianc/device-tree-rebasing.git The dts are found in dts/ in the barebox repository and will be updated from upstream regularly, probably for each upstream -rc. To keep the synchronization with upstream easy no changes to the original files are allowed under dts/. Instead changes to upstream dts files will be done using overlays in arch/$ARCH/dts/. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/media')
-rw-r--r--dts/Bindings/media/coda.txt30
-rw-r--r--dts/Bindings/media/exynos-fimc-lite.txt16
-rw-r--r--dts/Bindings/media/exynos-jpeg-codec.txt11
-rw-r--r--dts/Bindings/media/exynos4-fimc-is.txt49
-rw-r--r--dts/Bindings/media/exynos5-gsc.txt30
-rw-r--r--dts/Bindings/media/gpio-ir-receiver.txt16
-rw-r--r--dts/Bindings/media/i2c/adv7343.txt48
-rw-r--r--dts/Bindings/media/i2c/mt9p031.txt40
-rw-r--r--dts/Bindings/media/i2c/ths8200.txt19
-rw-r--r--dts/Bindings/media/i2c/tvp514x.txt44
-rw-r--r--dts/Bindings/media/i2c/tvp7002.txt53
-rw-r--r--dts/Bindings/media/img-ir-rev1.txt34
-rw-r--r--dts/Bindings/media/s5p-mfc.txt50
-rw-r--r--dts/Bindings/media/samsung-fimc.txt211
-rw-r--r--dts/Bindings/media/samsung-mipi-csis.txt81
-rw-r--r--dts/Bindings/media/samsung-s5c73m3.txt97
-rw-r--r--dts/Bindings/media/samsung-s5k5baf.txt58
-rw-r--r--dts/Bindings/media/samsung-s5k6a3.txt33
-rw-r--r--dts/Bindings/media/sh_mobile_ceu.txt18
-rw-r--r--dts/Bindings/media/st-rc.txt29
-rw-r--r--dts/Bindings/media/video-interfaces.txt230
21 files changed, 1197 insertions, 0 deletions
diff --git a/dts/Bindings/media/coda.txt b/dts/Bindings/media/coda.txt
new file mode 100644
index 0000000..2865d04
--- /dev/null
+++ b/dts/Bindings/media/coda.txt
@@ -0,0 +1,30 @@
+Chips&Media Coda multi-standard codec IP
+========================================
+
+Coda codec IPs are present in i.MX SoCs in various versions,
+called VPU (Video Processing Unit).
+
+Required properties:
+- compatible : should be "fsl,<chip>-src" for i.MX SoCs:
+ (a) "fsl,imx27-vpu" for CodaDx6 present in i.MX27
+ (b) "fsl,imx53-vpu" for CODA7541 present in i.MX53
+ (c) "fsl,imx6q-vpu" for CODA960 present in i.MX6q
+- reg: should be register base and length as documented in the
+ SoC reference manual
+- interrupts : Should contain the VPU interrupt. For CODA960,
+ a second interrupt is needed for the MJPEG unit.
+- clocks : Should contain the ahb and per clocks, in the order
+ determined by the clock-names property.
+- clock-names : Should be "ahb", "per"
+- iram : phandle pointing to the SRAM device node
+
+Example:
+
+vpu: vpu@63ff4000 {
+ compatible = "fsl,imx53-vpu";
+ reg = <0x63ff4000 0x1000>;
+ interrupts = <9>;
+ clocks = <&clks 63>, <&clks 63>;
+ clock-names = "ahb", "per";
+ iram = <&ocram>;
+};
diff --git a/dts/Bindings/media/exynos-fimc-lite.txt b/dts/Bindings/media/exynos-fimc-lite.txt
new file mode 100644
index 0000000..0bf6fb7
--- /dev/null
+++ b/dts/Bindings/media/exynos-fimc-lite.txt
@@ -0,0 +1,16 @@
+Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE)
+
+Required properties:
+
+- compatible : should be one of:
+ "samsung,exynos4212-fimc-lite" for Exynos4212/4412 SoCs,
+ "samsung,exynos5250-fimc-lite" for Exynos5250 compatible
+ devices;
+- reg : physical base address and size of the device memory mapped
+ registers;
+- interrupts : should contain FIMC-LITE interrupt;
+- clocks : FIMC LITE gate clock should be specified in this property.
+- clock-names : should contain "flite" entry.
+
+Each FIMC device should have an alias in the aliases node, in the form of
+fimc-lite<n>, where <n> is an integer specifying the IP block instance.
diff --git a/dts/Bindings/media/exynos-jpeg-codec.txt b/dts/Bindings/media/exynos-jpeg-codec.txt
new file mode 100644
index 0000000..937b755
--- /dev/null
+++ b/dts/Bindings/media/exynos-jpeg-codec.txt
@@ -0,0 +1,11 @@
+Samsung S5P/EXYNOS SoC series JPEG codec
+
+Required properties:
+
+- compatible : should be one of:
+ "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg";
+- reg : address and length of the JPEG codec IP register set;
+- interrupts : specifies the JPEG codec IP interrupt;
+- clocks : should contain the JPEG codec IP gate clock specifier, from the
+ common clock bindings;
+- clock-names : should contain "jpeg" entry.
diff --git a/dts/Bindings/media/exynos4-fimc-is.txt b/dts/Bindings/media/exynos4-fimc-is.txt
new file mode 100644
index 0000000..55c9ad6
--- /dev/null
+++ b/dts/Bindings/media/exynos4-fimc-is.txt
@@ -0,0 +1,49 @@
+Exynos4x12 SoC series Imaging Subsystem (FIMC-IS)
+
+The FIMC-IS is a subsystem for processing image signal from an image sensor.
+The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
+processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
+and SPI bus controllers, PWM and ADC.
+
+fimc-is node
+------------
+
+Required properties:
+- compatible : should be "samsung,exynos4212-fimc-is" for Exynos4212 and
+ Exynos4412 SoCs;
+- reg : physical base address and length of the registers set;
+- interrupts : must contain two FIMC-IS interrupts, in order: ISP0, ISP1;
+- clocks : list of clock specifiers, corresponding to entries in
+ clock-names property;
+- clock-names : must contain "ppmuispx", "ppmuispx", "lite0", "lite1"
+ "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "uart",
+ "ispdiv0", "ispdiv1", "mcuispdiv0", "mcuispdiv1", "aclk200",
+ "div_aclk200", "aclk400mcuisp", "div_aclk400mcuisp" entries,
+ matching entries in the clocks property.
+pmu subnode
+-----------
+
+Required properties:
+ - reg : must contain PMU physical base address and size of the register set.
+
+The following are the FIMC-IS peripheral device nodes and can be specified
+either standalone or as the fimc-is node child nodes.
+
+i2c-isp (ISP I2C bus controller) nodes
+------------------------------------------
+
+Required properties:
+
+- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212 and
+ Exynos4412 SoCs;
+- reg : physical base address and length of the registers set;
+- clocks : must contain gate clock specifier for this controller;
+- clock-names : must contain "i2c_isp" entry.
+
+For the above nodes it is required to specify a pinctrl state named "default",
+according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
+
+Device tree nodes of the image sensors' controlled directly by the FIMC-IS
+firmware must be child nodes of their corresponding ISP I2C bus controller node.
+The data link of these image sensors must be specified using the common video
+interfaces bindings, defined in video-interfaces.txt.
diff --git a/dts/Bindings/media/exynos5-gsc.txt b/dts/Bindings/media/exynos5-gsc.txt
new file mode 100644
index 0000000..0604d42
--- /dev/null
+++ b/dts/Bindings/media/exynos5-gsc.txt
@@ -0,0 +1,30 @@
+* Samsung Exynos5 G-Scaler device
+
+G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs.
+
+Required properties:
+- compatible: should be "samsung,exynos5-gsc"
+- reg: should contain G-Scaler physical address location and length.
+- interrupts: should contain G-Scaler interrupt number
+
+Example:
+
+gsc_0: gsc@0x13e00000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e00000 0x1000>;
+ interrupts = <0 85 0>;
+};
+
+Aliases:
+Each G-Scaler node should have a numbered alias in the aliases node,
+in the form of gscN, N = 0...3. G-Scaler driver uses these aliases
+to retrieve the device IDs using "of_alias_get_id()" call.
+
+Example:
+
+aliases {
+ gsc0 =&gsc_0;
+ gsc1 =&gsc_1;
+ gsc2 =&gsc_2;
+ gsc3 =&gsc_3;
+};
diff --git a/dts/Bindings/media/gpio-ir-receiver.txt b/dts/Bindings/media/gpio-ir-receiver.txt
new file mode 100644
index 0000000..56e726e
--- /dev/null
+++ b/dts/Bindings/media/gpio-ir-receiver.txt
@@ -0,0 +1,16 @@
+Device-Tree bindings for GPIO IR receiver
+
+Required properties:
+ - compatible: should be "gpio-ir-receiver".
+ - gpios: specifies GPIO used for IR signal reception.
+
+Optional properties:
+ - linux,rc-map-name: Linux specific remote control map name.
+
+Example node:
+
+ ir: ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 19 1>;
+ linux,rc-map-name = "rc-rc6-mce";
+ };
diff --git a/dts/Bindings/media/i2c/adv7343.txt b/dts/Bindings/media/i2c/adv7343.txt
new file mode 100644
index 0000000..5653bc2
--- /dev/null
+++ b/dts/Bindings/media/i2c/adv7343.txt
@@ -0,0 +1,48 @@
+* Analog Devices adv7343 video encoder
+
+The ADV7343 are high speed, digital-to-analog video encoders in a 64-lead LQFP
+package. Six high speed, 3.3 V, 11-bit video DACs provide support for composite
+(CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs in standard
+definition (SD), enhanced definition (ED), or high definition (HD) video
+formats.
+
+Required Properties :
+- compatible: Must be "adi,adv7343"
+
+Optional Properties :
+- adi,power-mode-sleep-mode: on enable the current consumption is reduced to
+ micro ampere level. All DACs and the internal PLL
+ circuit are disabled.
+- adi,power-mode-pll-ctrl: PLL and oversampling control. This control allows
+ internal PLL 1 circuit to be powered down and the
+ oversampling to be switched off.
+- ad,adv7343-power-mode-dac: array configuring the power on/off DAC's 1..6,
+ 0 = OFF and 1 = ON, Default value when this
+ property is not specified is <0 0 0 0 0 0>.
+- ad,adv7343-sd-config-dac-out: array configure SD DAC Output's 1 and 2, 0 = OFF
+ and 1 = ON, Default value when this property is
+ not specified is <0 0>.
+
+Example:
+
+i2c0@1c22000 {
+ ...
+ ...
+
+ adv7343@2a {
+ compatible = "adi,adv7343";
+ reg = <0x2a>;
+
+ port {
+ adv7343_1: endpoint {
+ adi,power-mode-sleep-mode;
+ adi,power-mode-pll-ctrl;
+ /* Use DAC1..3, DAC6 */
+ adi,dac-enable = <1 1 1 0 0 1>;
+ /* Use SD DAC output 1 */
+ adi,sd-dac-enable = <1 0>;
+ };
+ };
+ };
+ ...
+};
diff --git a/dts/Bindings/media/i2c/mt9p031.txt b/dts/Bindings/media/i2c/mt9p031.txt
new file mode 100644
index 0000000..cb60443
--- /dev/null
+++ b/dts/Bindings/media/i2c/mt9p031.txt
@@ -0,0 +1,40 @@
+* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
+
+The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with
+an active array size of 2592H x 1944V. It is programmable through a simple
+two-wire serial interface.
+
+Required Properties:
+- compatible: value should be either one among the following
+ (a) "aptina,mt9p031" for mt9p031 sensor
+ (b) "aptina,mt9p031m" for mt9p031m sensor
+
+- input-clock-frequency: Input clock frequency.
+
+- pixel-clock-frequency: Pixel clock frequency.
+
+Optional Properties:
+- reset-gpios: Chip reset GPIO
+
+For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+ i2c0@1c22000 {
+ ...
+ ...
+ mt9p031@5d {
+ compatible = "aptina,mt9p031";
+ reg = <0x5d>;
+ reset-gpios = <&gpio3 30 0>;
+
+ port {
+ mt9p031_1: endpoint {
+ input-clock-frequency = <6000000>;
+ pixel-clock-frequency = <96000000>;
+ };
+ };
+ };
+ ...
+ };
diff --git a/dts/Bindings/media/i2c/ths8200.txt b/dts/Bindings/media/i2c/ths8200.txt
new file mode 100644
index 0000000..285f6ae
--- /dev/null
+++ b/dts/Bindings/media/i2c/ths8200.txt
@@ -0,0 +1,19 @@
+* Texas Instruments THS8200 video encoder
+
+The ths8200 device is a digital to analog converter used in DVD players, video
+recorders, set-top boxes.
+
+Required Properties :
+- compatible : value must be "ti,ths8200"
+
+Example:
+
+ i2c0@1c22000 {
+ ...
+ ...
+ ths8200@5c {
+ compatible = "ti,ths8200";
+ reg = <0x5c>;
+ };
+ ...
+ };
diff --git a/dts/Bindings/media/i2c/tvp514x.txt b/dts/Bindings/media/i2c/tvp514x.txt
new file mode 100644
index 0000000..46752cc
--- /dev/null
+++ b/dts/Bindings/media/i2c/tvp514x.txt
@@ -0,0 +1,44 @@
+* Texas Instruments TVP514x video decoder
+
+The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip
+digital video decoder that digitizes and decodes all popular baseband analog
+video formats into digital video component. The tvp514x decoder supports analog-
+to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D
+conversion and decoding of NTSC, PAL and SECAM composite and S-video into
+component YCbCr.
+
+Required Properties :
+- compatible : value should be either one among the following
+ (a) "ti,tvp5146" for tvp5146 decoder.
+ (b) "ti,tvp5146m2" for tvp5146m2 decoder.
+ (c) "ti,tvp5147" for tvp5147 decoder.
+ (d) "ti,tvp5147m1" for tvp5147m1 decoder.
+
+- hsync-active: HSYNC Polarity configuration for endpoint.
+
+- vsync-active: VSYNC Polarity configuration for endpoint.
+
+- pclk-sample: Clock polarity of the endpoint.
+
+For further reading on port node refer to Documentation/devicetree/bindings/
+media/video-interfaces.txt.
+
+Example:
+
+ i2c0@1c22000 {
+ ...
+ ...
+ tvp514x@5c {
+ compatible = "ti,tvp5146";
+ reg = <0x5c>;
+
+ port {
+ tvp514x_1: endpoint {
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ };
+ };
+ };
+ ...
+ };
diff --git a/dts/Bindings/media/i2c/tvp7002.txt b/dts/Bindings/media/i2c/tvp7002.txt
new file mode 100644
index 0000000..5f28b5d
--- /dev/null
+++ b/dts/Bindings/media/i2c/tvp7002.txt
@@ -0,0 +1,53 @@
+* Texas Instruments TV7002 video decoder
+
+The TVP7002 device supports digitizing of video and graphics signal in RGB and
+YPbPr color space.
+
+Required Properties :
+- compatible : Must be "ti,tvp7002"
+
+Optional Properties:
+- hsync-active: HSYNC Polarity configuration for the bus. Default value when
+ this property is not specified is <0>.
+
+- vsync-active: VSYNC Polarity configuration for the bus. Default value when
+ this property is not specified is <0>.
+
+- pclk-sample: Clock polarity of the bus. Default value when this property is
+ not specified is <0>.
+
+- sync-on-green-active: Active state of Sync-on-green signal property of the
+ endpoint.
+ 0 = Normal Operation (Active Low, Default)
+ 1 = Inverted operation
+
+- field-even-active: Active-high Field ID output polarity control of the bus.
+ Under normal operation, the field ID output is set to logic 1 for an odd field
+ (field 1) and set to logic 0 for an even field (field 0).
+ 0 = Normal Operation (Active Low, Default)
+ 1 = FID output polarity inverted
+
+For further reading of port node refer Documentation/devicetree/bindings/media/
+video-interfaces.txt.
+
+Example:
+
+ i2c0@1c22000 {
+ ...
+ ...
+ tvp7002@5c {
+ compatible = "ti,tvp7002";
+ reg = <0x5c>;
+
+ port {
+ tvp7002_1: endpoint {
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ sync-on-green-active = <1>;
+ field-even-active = <0>;
+ };
+ };
+ };
+ ...
+ };
diff --git a/dts/Bindings/media/img-ir-rev1.txt b/dts/Bindings/media/img-ir-rev1.txt
new file mode 100644
index 0000000..5434ce6
--- /dev/null
+++ b/dts/Bindings/media/img-ir-rev1.txt
@@ -0,0 +1,34 @@
+* ImgTec Infrared (IR) decoder version 1
+
+This binding is for Imagination Technologies' Infrared decoder block,
+specifically major revision 1.
+
+Required properties:
+- compatible: Should be "img,ir-rev1"
+- reg: Physical base address of the controller and length of
+ memory mapped region.
+- interrupts: The interrupt specifier to the cpu.
+
+Optional properties:
+- clocks: List of clock specifiers as described in standard
+ clock bindings.
+ Up to 3 clocks may be specified in the following order:
+ 1st: Core clock (defaults to 32.768KHz if omitted).
+ 2nd: System side (fast) clock.
+ 3rd: Power modulation clock.
+- clock-names: List of clock names corresponding to the clocks
+ specified in the clocks property.
+ Accepted clock names are:
+ "core": Core clock.
+ "sys": System clock.
+ "mod": Power modulation clock.
+
+Example:
+
+ ir@02006200 {
+ compatible = "img,ir-rev1";
+ reg = <0x02006200 0x100>;
+ interrupts = <29 4>;
+ clocks = <&clk_32khz>;
+ clock-names = "core";
+ };
diff --git a/dts/Bindings/media/s5p-mfc.txt b/dts/Bindings/media/s5p-mfc.txt
new file mode 100644
index 0000000..f418168
--- /dev/null
+++ b/dts/Bindings/media/s5p-mfc.txt
@@ -0,0 +1,50 @@
+* Samsung Multi Format Codec (MFC)
+
+Multi Format Codec (MFC) is the IP present in Samsung SoCs which
+supports high resolution decoding and encoding functionalities.
+The MFC device driver is a v4l2 driver which can encode/decode
+video raw/elementary streams and has support for all popular
+video codecs.
+
+Required properties:
+ - compatible : value should be either one among the following
+ (a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs
+ (b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
+ (b) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
+
+ - reg : Physical base address of the IP registers and length of memory
+ mapped region.
+
+ - interrupts : MFC interrupt number to the CPU.
+ - clocks : from common clock binding: handle to mfc clock.
+ - clock-names : from common clock binding: must contain "mfc",
+ corresponding to entry in the clocks property.
+
+ - samsung,mfc-r : Base address of the first memory bank used by MFC
+ for DMA contiguous memory allocation and its size.
+
+ - samsung,mfc-l : Base address of the second memory bank used by MFC
+ for DMA contiguous memory allocation and its size.
+
+Optional properties:
+ - samsung,power-domain : power-domain property defined with a phandle
+ to respective power domain.
+
+Example:
+SoC specific DT entry:
+
+mfc: codec@13400000 {
+ compatible = "samsung,mfc-v5";
+ reg = <0x13400000 0x10000>;
+ interrupts = <0 94 0>;
+ samsung,power-domain = <&pd_mfc>;
+ clocks = <&clock 273>;
+ clock-names = "mfc";
+};
+
+Board specific DT entry:
+
+codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
diff --git a/dts/Bindings/media/samsung-fimc.txt b/dts/Bindings/media/samsung-fimc.txt
new file mode 100644
index 0000000..922d6f8
--- /dev/null
+++ b/dts/Bindings/media/samsung-fimc.txt
@@ -0,0 +1,211 @@
+Samsung S5P/EXYNOS SoC Camera Subsystem (FIMC)
+----------------------------------------------
+
+The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
+represented by separate device tree nodes. Currently this includes: FIMC (in
+the S5P SoCs series known as CAMIF), MIPI CSIS, FIMC-LITE and FIMC-IS (ISP).
+
+The sub-subdevices are defined as child nodes of the common 'camera' node which
+also includes common properties of the whole subsystem not really specific to
+any single sub-device, like common camera port pins or the CAMCLK clock outputs
+for external image sensors attached to an SoC.
+
+Common 'camera' node
+--------------------
+
+Required properties:
+
+- compatible: must be "samsung,fimc", "simple-bus"
+- clocks: list of clock specifiers, corresponding to entries in
+ the clock-names property;
+- clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0",
+ "pxl_async1" entries, matching entries in the clocks property.
+
+- #clock-cells: from the common clock bindings (../clock/clock-bindings.txt),
+ must be 1. A clock provider is associated with the 'camera' node and it should
+ be referenced by external sensors that use clocks provided by the SoC on
+ CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock.
+ The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.
+
+- clock-output-names: from the common clock bindings, should contain names of
+ clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT,
+ CAM_B_CLKOUT output clocks respectively.
+
+The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
+to define a required pinctrl state named "default" and optional pinctrl states:
+"idle", "active-a", active-b". These optional states can be used to switch the
+camera port pinmux at runtime. The "idle" state should configure both the camera
+ports A and B into high impedance state, especially the CAMCLK clock output
+should be inactive. For the "active-a" state the camera port A must be activated
+and the port B deactivated and for the state "active-b" it should be the other
+way around.
+
+The 'camera' node must include at least one 'fimc' child node.
+
+
+'fimc' device nodes
+-------------------
+
+Required properties:
+
+- compatible: "samsung,s5pv210-fimc" for S5PV210, "samsung,exynos4210-fimc"
+ for Exynos4210 and "samsung,exynos4212-fimc" for Exynos4x12 SoCs;
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain FIMC interrupt;
+- clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names;
+- clock-names: must contain "fimc", "sclk_fimc" entries.
+- samsung,pix-limits: an array of maximum supported image sizes in pixels, for
+ details refer to Table 2-1 in the S5PV210 SoC User Manual; The meaning of
+ each cell is as follows:
+ 0 - scaler input horizontal size,
+ 1 - input horizontal size for the scaler bypassed,
+ 2 - REAL_WIDTH without input rotation,
+ 3 - REAL_HEIGHT with input rotation,
+- samsung,sysreg: a phandle to the SYSREG node.
+
+Each FIMC device should have an alias in the aliases node, in the form of
+fimc<n>, where <n> is an integer specifying the IP block instance.
+
+Optional properties:
+
+- clock-frequency: maximum FIMC local clock (LCLK) frequency;
+- samsung,min-pix-sizes: an array specyfing minimum image size in pixels at
+ the FIMC input and output DMA, in the first and second cell respectively.
+ Default value when this property is not present is <16 16>;
+- samsung,min-pix-alignment: minimum supported image height alignment (first
+ cell) and the horizontal image offset (second cell). The values are in pixels
+ and default to <2 1> when this property is not present;
+- samsung,mainscaler-ext: a boolean property indicating whether the FIMC IP
+ supports extended image size and has CIEXTEN register;
+- samsung,rotators: a bitmask specifying whether this IP has the input and
+ the output rotator. Bits 4 and 0 correspond to input and output rotator
+ respectively. If a rotator is present its corresponding bit should be set.
+ Default value when this property is not specified is 0x11.
+- samsung,cam-if: a bolean property indicating whether the IP block includes
+ the camera input interface.
+- samsung,isp-wb: this property must be present if the IP block has the ISP
+ writeback input.
+- samsung,lcd-wb: this property must be present if the IP block has the LCD
+ writeback input.
+
+
+'parallel-ports' node
+---------------------
+
+This node should contain child 'port' nodes specifying active parallel video
+input ports. It includes camera A and camera B inputs. 'reg' property in the
+port nodes specifies data input - 0, 1 indicates input A, B respectively.
+
+Optional properties
+
+- samsung,camclk-out (deprecated) : specifies clock output for remote sensor,
+ 0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
+
+Image sensor nodes
+------------------
+
+The sensor device nodes should be added to their control bus controller (e.g.
+I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
+using the common video interfaces bindings, defined in video-interfaces.txt.
+
+Example:
+
+ aliases {
+ fimc0 = &fimc_0;
+ };
+
+ /* Parallel bus IF sensor */
+ i2c_0: i2c@13860000 {
+ s5k6aa: sensor@3c {
+ compatible = "samsung,s5k6aafx";
+ reg = <0x3c>;
+ vddio-supply = <...>;
+
+ clock-frequency = <24000000>;
+ clocks = <&camera 1>;
+ clock-names = "mclk";
+
+ port {
+ s5k6aa_ep: endpoint {
+ remote-endpoint = <&fimc0_ep>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <1>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+
+ /* MIPI CSI-2 bus IF sensor */
+ s5c73m3: sensor@0x1a {
+ compatible = "samsung,s5c73m3";
+ reg = <0x1a>;
+ vddio-supply = <...>;
+
+ clock-frequency = <24000000>;
+ clocks = <&camera 0>;
+ clock-names = "mclk";
+
+ port {
+ s5c73m3_1: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csis0_ep>;
+ };
+ };
+ };
+ };
+
+ camera {
+ compatible = "samsung,fimc", "simple-bus";
+ clocks = <&clock 132>, <&clock 133>, <&clock 351>,
+ <&clock 352>;
+ clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0",
+ "pxl_async1";
+ #clock-cells = <1>;
+ clock-output-names = "cam_a_clkout", "cam_b_clkout";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_port_a_clk_active>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* parallel camera ports */
+ parallel-ports {
+ /* camera A input */
+ port@0 {
+ reg = <0>;
+ fimc0_ep: endpoint {
+ remote-endpoint = <&s5k6aa_ep>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <1>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+
+ fimc_0: fimc@11800000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11800000 0x1000>;
+ interrupts = <0 85 0>;
+ status = "okay";
+ };
+
+ csis_0: csis@11880000 {
+ compatible = "samsung,exynos4210-csis";
+ reg = <0x11880000 0x1000>;
+ interrupts = <0 78 0>;
+ /* camera C input */
+ port@3 {
+ reg = <3>;
+ csis0_ep: endpoint {
+ remote-endpoint = <&s5c73m3_ep>;
+ data-lanes = <1 2 3 4>;
+ samsung,csis-hs-settle = <12>;
+ };
+ };
+ };
+ };
+
+The MIPI-CSIS device binding is defined in samsung-mipi-csis.txt.
diff --git a/dts/Bindings/media/samsung-mipi-csis.txt b/dts/Bindings/media/samsung-mipi-csis.txt
new file mode 100644
index 0000000..be45f0b
--- /dev/null
+++ b/dts/Bindings/media/samsung-mipi-csis.txt
@@ -0,0 +1,81 @@
+Samsung S5P/EXYNOS SoC series MIPI CSI-2 receiver (MIPI CSIS)
+-------------------------------------------------------------
+
+Required properties:
+
+- compatible : "samsung,s5pv210-csis" for S5PV210 (S5PC110),
+ "samsung,exynos4210-csis" for Exynos4210 (S5PC210),
+ "samsung,exynos4212-csis" for Exynos4212/Exynos4412,
+ "samsung,exynos5250-csis" for Exynos5250;
+- reg : offset and length of the register set for the device;
+- interrupts : should contain MIPI CSIS interrupt; the format of the
+ interrupt specifier depends on the interrupt controller;
+- bus-width : maximum number of data lanes supported (SoC specific);
+- vddio-supply : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V);
+- vddcore-supply : MIPI CSIS Core voltage supply (e.g. 1.1V);
+- clocks : list of clock specifiers, corresponding to entries in
+ clock-names property;
+- clock-names : must contain "csis", "sclk_csis" entries, matching entries
+ in the clocks property.
+
+Optional properties:
+
+- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
+ value when this property is not specified is 166 MHz;
+- samsung,csis-wclk : CSI-2 wrapper clock selection. If this property is present
+ external clock from CMU will be used, or the bus clock if
+ if it's not specified.
+
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+media/video-interfaces.txt. The following are properties specific to those nodes.
+
+port node
+---------
+
+- reg : (required) must be 3 for camera C input (CSIS0) or 4 for
+ camera D input (CSIS1);
+
+endpoint node
+-------------
+
+- data-lanes : (required) an array specifying active physical MIPI-CSI2
+ data input lanes and their mapping to logical lanes; the
+ array's content is unused, only its length is meaningful;
+
+- samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time;
+
+
+Example:
+
+ reg0: regulator@0 {
+ };
+
+ reg1: regulator@1 {
+ };
+
+/* SoC properties */
+
+ csis_0: csis@11880000 {
+ compatible = "samsung,exynos4210-csis";
+ reg = <0x11880000 0x1000>;
+ interrupts = <0 78 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+/* Board properties */
+
+ csis_0: csis@11880000 {
+ clock-frequency = <166000000>;
+ vddio-supply = <&reg0>;
+ vddcore-supply = <&reg1>;
+ port {
+ reg = <3>; /* 3 - CSIS0, 4 - CSIS1 */
+ csis0_ep: endpoint {
+ remote-endpoint = <...>;
+ data-lanes = <1>, <2>;
+ samsung,csis-hs-settle = <12>;
+ };
+ };
+ };
diff --git a/dts/Bindings/media/samsung-s5c73m3.txt b/dts/Bindings/media/samsung-s5c73m3.txt
new file mode 100644
index 0000000..2c85c45
--- /dev/null
+++ b/dts/Bindings/media/samsung-s5c73m3.txt
@@ -0,0 +1,97 @@
+Samsung S5C73M3 8Mp camera ISP
+------------------------------
+
+The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) video
+data busses. The I2C bus is the main control bus and additionally the SPI bus
+is used, mostly for transferring the firmware to and from the device. Two
+slave device nodes corresponding to these control bus interfaces are required
+and should be placed under respective bus controller nodes.
+
+I2C slave device node
+---------------------
+
+Required properties:
+
+- compatible : "samsung,s5c73m3";
+- reg : I2C slave address of the sensor;
+- vdd-int-supply : digital power supply (1.2V);
+- vdda-supply : analog power supply (1.2V);
+- vdd-reg-supply : regulator input power supply (2.8V);
+- vddio-host-supply : host I/O power supply (1.8V to 2.8V);
+- vddio-cis-supply : CIS I/O power supply (1.2V to 1.8V);
+- vdd-af-supply : lens power supply (2.8V);
+- xshutdown-gpios : specifier of GPIO connected to the XSHUTDOWN pin;
+- standby-gpios : specifier of GPIO connected to the STANDBY pin;
+- clocks : should contain list of phandle and clock specifier pairs
+ according to common clock bindings for the clocks described
+ in the clock-names property;
+- clock-names : should contain "cis_extclk" entry for the CIS_EXTCLK clock;
+
+Optional properties:
+
+- clock-frequency : the frequency at which the "cis_extclk" clock should be
+ configured to operate, in Hz; if this property is not
+ specified default 24 MHz value will be used.
+
+The common video interfaces bindings (see video-interfaces.txt) should be used
+to specify link from the S5C73M3 to an external image data receiver. The S5C73M3
+device node should contain one 'port' child node with an 'endpoint' subnode for
+this purpose. The data link from a raw image sensor to the S5C73M3 can be
+similarly specified, but it is optional since the S5C73M3 ISP and a raw image
+sensor are usually inseparable and form a hybrid module.
+
+Following properties are valid for the endpoint node(s):
+
+endpoint subnode
+----------------
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+ video-interfaces.txt. This sensor doesn't support data lane remapping
+ and physical lane indexes in subsequent elements of the array should
+ be only consecutive ascending values.
+
+SPI device node
+---------------
+
+Required properties:
+
+- compatible : "samsung,s5c73m3";
+
+For more details see description of the SPI busses bindings
+(../spi/spi-bus.txt) and bindings of a specific bus controller.
+
+Example:
+
+i2c@138A000000 {
+ ...
+ s5c73m3@3c {
+ compatible = "samsung,s5c73m3";
+ reg = <0x3c>;
+ vdd-int-supply = <&buck9_reg>;
+ vdda-supply = <&ldo17_reg>;
+ vdd-reg-supply = <&cam_io_reg>;
+ vddio-host-supply = <&ldo18_reg>;
+ vddio-cis-supply = <&ldo9_reg>;
+ vdd-af-supply = <&cam_af_reg>;
+ clock-frequency = <24000000>;
+ clocks = <&clk 0>;
+ clock-names = "cis_extclk";
+ reset-gpios = <&gpf1 3 1>;
+ standby-gpios = <&gpm0 1 1>;
+ port {
+ s5c73m3_ep: endpoint {
+ remote-endpoint = <&csis0_ep>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+ };
+};
+
+spi@1392000 {
+ ...
+ s5c73m3_spi: s5c73m3@0 {
+ compatible = "samsung,s5c73m3";
+ reg = <0>;
+ ...
+ };
+};
diff --git a/dts/Bindings/media/samsung-s5k5baf.txt b/dts/Bindings/media/samsung-s5k5baf.txt
new file mode 100644
index 0000000..1f51e04
--- /dev/null
+++ b/dts/Bindings/media/samsung-s5k5baf.txt
@@ -0,0 +1,58 @@
+Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
+--------------------------------------------------------------------
+
+Required properties:
+
+- compatible : "samsung,s5k5baf";
+- reg : I2C slave address of the sensor;
+- vdda-supply : analog power supply 2.8V (2.6V to 3.0V);
+- vddreg-supply : regulator input power supply 1.8V (1.7V to 1.9V)
+ or 2.8V (2.6V to 3.0);
+- vddio-supply : I/O power supply 1.8V (1.65V to 1.95V)
+ or 2.8V (2.5V to 3.1V);
+- stbyn-gpios : GPIO connected to STDBYN pin;
+- rstn-gpios : GPIO connected to RSTN pin;
+- clocks : list of phandle and clock specifier pairs
+ according to common clock bindings for the
+ clocks described in clock-names;
+- clock-names : should include "mclk" for the sensor's master clock;
+
+Optional properties:
+
+- clock-frequency : the frequency at which the "mclk" clock should be
+ configured to operate, in Hz; if this property is not
+ specified default 24 MHz value will be used.
+
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+media/video-interfaces.txt. The following are properties specific to those
+nodes.
+
+endpoint node
+-------------
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+ video-interfaces.txt. If present it should be <1> - the device
+ supports only one data lane without re-mapping.
+
+Example:
+
+s5k5bafx@2d {
+ compatible = "samsung,s5k5baf";
+ reg = <0x2d>;
+ vdda-supply = <&cam_io_en_reg>;
+ vddreg-supply = <&vt_core_15v_reg>;
+ vddio-supply = <&vtcam_reg>;
+ stbyn-gpios = <&gpl2 0 1>;
+ rstn-gpios = <&gpl2 1 1>;
+ clock-names = "mclk";
+ clocks = <&clock_cam 0>;
+ clock-frequency = <24000000>;
+
+ port {
+ s5k5bafx_ep: endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+};
diff --git a/dts/Bindings/media/samsung-s5k6a3.txt b/dts/Bindings/media/samsung-s5k6a3.txt
new file mode 100644
index 0000000..cce01e8
--- /dev/null
+++ b/dts/Bindings/media/samsung-s5k6a3.txt
@@ -0,0 +1,33 @@
+Samsung S5K6A3(YX) raw image sensor
+---------------------------------
+
+S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
+and CCI (I2C compatible) control bus.
+
+Required properties:
+
+- compatible : "samsung,s5k6a3";
+- reg : I2C slave address of the sensor;
+- svdda-supply : core voltage supply;
+- svddio-supply : I/O voltage supply;
+- afvdd-supply : AF (actuator) voltage supply;
+- gpios : specifier of a GPIO connected to the RESET pin;
+- clocks : should contain list of phandle and clock specifier pairs
+ according to common clock bindings for the clocks described
+ in the clock-names property;
+- clock-names : should contain "extclk" entry for the sensor's EXTCLK clock;
+
+Optional properties:
+
+- clock-frequency : the frequency at which the "extclk" clock should be
+ configured to operate, in Hz; if this property is not
+ specified default 24 MHz value will be used.
+
+The common video interfaces bindings (see video-interfaces.txt) should be
+used to specify link to the image data receiver. The S5K6A3(YX) device
+node should contain one 'port' child node with an 'endpoint' subnode.
+
+Following properties are valid for the endpoint node:
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+ video-interfaces.txt. The sensor supports only one data lane.
diff --git a/dts/Bindings/media/sh_mobile_ceu.txt b/dts/Bindings/media/sh_mobile_ceu.txt
new file mode 100644
index 0000000..1ce4e46
--- /dev/null
+++ b/dts/Bindings/media/sh_mobile_ceu.txt
@@ -0,0 +1,18 @@
+Bindings, specific for the sh_mobile_ceu_camera.c driver:
+ - compatible: Should be "renesas,sh-mobile-ceu"
+ - reg: register base and size
+ - interrupts: the interrupt number
+ - interrupt-parent: the interrupt controller
+ - renesas,max-width: maximum image width, supported on this SoC
+ - renesas,max-height: maximum image height, supported on this SoC
+
+Example:
+
+ceu0: ceu@0xfe910000 {
+ compatible = "renesas,sh-mobile-ceu";
+ reg = <0xfe910000 0xa0>;
+ interrupt-parent = <&intcs>;
+ interrupts = <0x880>;
+ renesas,max-width = <8188>;
+ renesas,max-height = <8188>;
+};
diff --git a/dts/Bindings/media/st-rc.txt b/dts/Bindings/media/st-rc.txt
new file mode 100644
index 0000000..05c432d
--- /dev/null
+++ b/dts/Bindings/media/st-rc.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for ST IRB IP
+
+Required properties:
+ - compatible: Should contain "st,comms-irb".
+ - reg: Base physical address of the controller and length of memory
+ mapped region.
+ - interrupts: interrupt-specifier for the sole interrupt generated by
+ the device. The interrupt specifier format depends on the interrupt
+ controller parent.
+ - rx-mode: can be "infrared" or "uhf". This property specifies the L1
+ protocol used for receiving remote control signals. rx-mode should
+ be present iff the rx pins are wired up.
+ - tx-mode: should be "infrared". This property specifies the L1
+ protocol used for transmitting remote control signals. tx-mode should
+ be present iff the tx pins are wired up.
+
+Optional properties:
+ - pinctrl-names, pinctrl-0: the pincontrol settings to configure muxing
+ properly for IRB pins.
+ - clocks : phandle with clock-specifier pair for IRB.
+
+Example node:
+
+ rc: rc@fe518000 {
+ compatible = "st,comms-irb";
+ reg = <0xfe518000 0x234>;
+ interrupts = <0 203 0>;
+ rx-mode = "infrared";
+ };
diff --git a/dts/Bindings/media/video-interfaces.txt b/dts/Bindings/media/video-interfaces.txt
new file mode 100644
index 0000000..ce719f8
--- /dev/null
+++ b/dts/Bindings/media/video-interfaces.txt
@@ -0,0 +1,230 @@
+Common bindings for video receiver and transmitter interfaces
+
+General concept
+---------------
+
+Video data pipelines usually consist of external devices, e.g. camera sensors,
+controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
+video DMA engines and video data processors.
+
+SoC internal blocks are described by DT nodes, placed similarly to other SoC
+blocks. External devices are represented as child nodes of their respective
+bus controller nodes, e.g. I2C.
+
+Data interfaces on all video devices are described by their child 'port' nodes.
+Configuration of a port depends on other devices participating in the data
+transfer and is described by 'endpoint' subnodes.
+
+device {
+ ...
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ ...
+ endpoint@0 { ... };
+ endpoint@1 { ... };
+ };
+ port@1 { ... };
+ };
+};
+
+If a port can be configured to work with more than one remote device on the same
+bus, an 'endpoint' child node must be provided for each of them. If more than
+one port is present in a device node or there is more than one endpoint at a
+port, or port node needs to be associated with a selected hardware interface,
+a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
+used.
+
+All 'port' nodes can be grouped under optional 'ports' node, which allows to
+specify #address-cells, #size-cells properties independently for the 'port'
+and 'endpoint' nodes and any child device nodes a device might have.
+
+Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
+phandles. An endpoint subnode of a device contains all properties needed for
+configuration of this device for data exchange with other device. In most
+cases properties at the peer 'endpoint' nodes will be identical, however they
+might need to be different when there is any signal modifications on the bus
+between two devices, e.g. there are logic signal inverters on the lines.
+
+It is allowed for multiple endpoints at a port to be active simultaneously,
+where supported by a device. For example, in case where a data interface of
+a device is partitioned into multiple data busses, e.g. 16-bit input port
+divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width
+and data-shift properties can be used to assign physical data lines to each
+endpoint node (logical bus).
+
+
+Required properties
+-------------------
+
+If there is more than one 'port' or more than one 'endpoint' node or 'reg'
+property is present in port and/or endpoint nodes the following properties
+are required in a relevant parent node:
+
+ - #address-cells : number of cells required to define port/endpoint
+ identifier, should be 1.
+ - #size-cells : should be zero.
+
+Optional endpoint properties
+----------------------------
+
+- remote-endpoint: phandle to an 'endpoint' subnode of a remote device node.
+- slave-mode: a boolean property indicating that the link is run in slave mode.
+ The default when this property is not specified is master mode. In the slave
+ mode horizontal and vertical synchronization signals are provided to the
+ slave device (data source) by the master device (data sink). In the master
+ mode the data source device is also the source of the synchronization signals.
+- bus-width: number of data lines actively used, valid for the parallel busses.
+- data-shift: on the parallel data busses, if bus-width is used to specify the
+ number of data lines, data-shift can be used to specify which data lines are
+ used, e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used.
+- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
+ Note, that if HSYNC and VSYNC polarities are not specified, embedded
+ synchronization may be required, where supported.
+- data-active: similar to HSYNC and VSYNC, specifies data line polarity.
+- field-even-active: field signal level during the even field data transmission.
+- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
+ signal.
+- sync-on-green-active: active state of Sync-on-green (SoG) signal, 0/1 for
+ LOW/HIGH respectively.
+- data-lanes: an array of physical data lane indexes. Position of an entry
+ determines the logical lane number, while the value of an entry indicates
+ physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have
+ "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0.
+ This property is valid for serial busses only (e.g. MIPI CSI-2).
+- clock-lanes: an array of physical clock lane indexes. Position of an entry
+ determines the logical lane number, while the value of an entry indicates
+ physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;",
+ which places the clock lane on hardware lane 0. This property is valid for
+ serial busses only (e.g. MIPI CSI-2). Note that for the MIPI CSI-2 bus this
+ array contains only one entry.
+- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
+ clock mode.
+
+
+Example
+-------
+
+The example snippet below describes two data pipelines. ov772x and imx074 are
+camera sensors with a parallel and serial (MIPI CSI-2) video bus respectively.
+Both sensors are on the I2C control bus corresponding to the i2c0 controller
+node. ov772x sensor is linked directly to the ceu0 video host interface.
+imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
+(single) DMA engine writing captured data to memory. ceu0 node has a single
+'port' node which may indicate that at any time only one of the following data
+pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
+
+ ceu0: ceu@0xfe910000 {
+ compatible = "renesas,sh-mobile-ceu";
+ reg = <0xfe910000 0xa0>;
+ interrupts = <0x880>;
+
+ mclk: master_clock {
+ compatible = "renesas,ceu-clock";
+ #clock-cells = <1>;
+ clock-frequency = <50000000>; /* Max clock frequency */
+ clock-output-names = "mclk";
+ };
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Parallel bus endpoint */
+ ceu0_1: endpoint@1 {
+ reg = <1>; /* Local endpoint # */
+ remote = <&ov772x_1_1>; /* Remote phandle */
+ bus-width = <8>; /* Used data lines */
+ data-shift = <2>; /* Lines 9:2 are used */
+
+ /* If hsync-active/vsync-active are missing,
+ embedded BT.656 sync is used */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+
+ /* MIPI CSI-2 bus endpoint */
+ ceu0_0: endpoint@0 {
+ reg = <0>;
+ remote = <&csi2_2>;
+ };
+ };
+ };
+
+ i2c0: i2c@0xfff20000 {
+ ...
+ ov772x_1: camera@0x21 {
+ compatible = "omnivision,ov772x";
+ reg = <0x21>;
+ vddio-supply = <&regulator1>;
+ vddcore-supply = <&regulator2>;
+
+ clock-frequency = <20000000>;
+ clocks = <&mclk 0>;
+ clock-names = "xclk";
+
+ port {
+ /* With 1 endpoint per port no need for addresses. */
+ ov772x_1_1: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&ceu0_1>;
+ hsync-active = <1>;
+ vsync-active = <0>; /* Who came up with an
+ inverter here ?... */
+ data-active = <1>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+
+ imx074: camera@0x1a {
+ compatible = "sony,imx074";
+ reg = <0x1a>;
+ vddio-supply = <&regulator1>;
+ vddcore-supply = <&regulator2>;
+
+ clock-frequency = <30000000>; /* Shared clock with ov772x_1 */
+ clocks = <&mclk 0>;
+ clock-names = "sysclk"; /* Assuming this is the
+ name in the datasheet */
+ port {
+ imx074_1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi2_1>;
+ };
+ };
+ };
+ };
+
+ csi2: csi2@0xffc90000 {
+ compatible = "renesas,sh-mobile-csi2";
+ reg = <0xffc90000 0x1000>;
+ interrupts = <0x17a0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */
+ reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S,
+ PHY_M has port address 0,
+ is unused. */
+ csi2_1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <2 1>;
+ remote-endpoint = <&imx074_1>;
+ };
+ };
+ port@2 {
+ reg = <2>; /* port 2: link to the CEU */
+
+ csi2_2: endpoint {
+ remote-endpoint = <&ceu0_0>;
+ };
+ };
+ };