dts: update to v5.3-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

6 files changed, 169 insertions, 7 deletions

diff --git a/dts/Bindings/media/allegro.txt b/dts/Bindings/media/allegro.txt
new file mode 100644
index 0000000000..a92e2fbf26
--- /dev/null
+++ b/dts/Bindings/media/allegro.txt
@@ -0,0 +1,43 @@
+Device-tree bindings for the Allegro DVT video IP codecs present in the Xilinx
+ZynqMP SoC. The IP core may either be a H.264/H.265 encoder or H.264/H.265
+decoder ip core.
+
+Each actual codec engines is controlled by a microcontroller (MCU). Host
+software uses a provided mailbox interface to communicate with the MCU. The
+MCU share an interrupt.
+
+Required properties:
+  - compatible: value should be one of the following
+    "allegro,al5e-1.1", "allegro,al5e": encoder IP core
+    "allegro,al5d-1.1", "allegro,al5d": decoder IP core
+  - reg: base and length of the memory mapped register region and base and
+    length of the memory mapped sram
+  - reg-names: must include "regs" and "sram"
+  - interrupts: shared interrupt from the MCUs to the processing system
+  - clocks: must contain an entry for each entry in clock-names
+  - clock-names: must include "core_clk", "mcu_clk", "m_axi_core_aclk",
+    "m_axi_mcu_aclk", "s_axi_lite_aclk"
+
+Example:
+	al5e: video-codec@a0009000 {
+		compatible = "allegro,al5e-1.1", "allegro,al5e";
+		reg = <0 0xa0009000 0 0x1000>,
+		      <0 0xa0000000 0 0x8000>;
+		reg-names = "regs", "sram";
+		interrupts = <0 96 4>;
+		clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>,
+			 <&clkc 71>, <&clkc 71>, <&clkc 71>;
+		clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
+			      "m_axi_mcu_aclk", "s_axi_lite_aclk"
+	};
+	al5d: video-codec@a0029000 {
+		compatible = "allegro,al5d-1.1", "allegro,al5d";
+		reg = <0 0xa0029000 0 0x1000>,
+		      <0 0xa0020000 0 0x8000>;
+		reg-names = "regs", "sram";
+		interrupts = <0 96 4>;
+		clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>,
+			 <&clkc 71>, <&clkc 71>, <&clkc 71>;
+		clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
+			      "m_axi_mcu_aclk", "s_axi_lite_aclk"
+	};
diff --git a/dts/Bindings/media/amlogic,vdec.txt b/dts/Bindings/media/amlogic,vdec.txt
new file mode 100644
index 0000000000..aabdd01bcf
--- /dev/null
+++ b/dts/Bindings/media/amlogic,vdec.txt
@@ -0,0 +1,71 @@
+Amlogic Video Decoder
+================================
+
+The video decoding IP lies within the DOS memory region,
+except for the hardware bitstream parser that makes use of an undocumented
+region.
+
+It makes use of the following blocks:
+
+- ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks
+then feed from this VIFIFO.
+- VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1.
+- VDEC_HEVC can decode HEVC and VP9.
+
+Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run
+concurrently.
+
+Device Tree Bindings:
+---------------------
+
+VDEC: Video Decoder
+--------------------------
+
+Required properties:
+- compatible: value should be different for each SoC family as :
+	- GXBB (S905) : "amlogic,gxbb-vdec"
+	- GXL (S905X, S905D) : "amlogic,gxl-vdec"
+	- GXM (S912) : "amlogic,gxm-vdec"
+- reg: base address and size of he following memory-mapped regions :
+	- dos
+	- esparser
+- reg-names: should contain the names of the previous memory regions
+- interrupts: should contain the following IRQs:
+	- vdec
+	- esparser
+- interrupt-names: should contain the names of the previous interrupts
+- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node
+- amlogic,canvas: should point to a canvas provider node
+- clocks: should contain the following clocks :
+	- dos_parser
+	- dos
+	- vdec_1
+	- vdec_hevc
+- clock-names: should contain the names of the previous clocks
+- resets: should contain the parser reset
+- reset-names: should be "esparser"
+
+Example:
+
+vdec: video-decoder@c8820000 {
+	compatible = "amlogic,gxbb-vdec";
+	reg = <0x0 0xc8820000 0x0 0x10000>,
+	      <0x0 0xc110a580 0x0 0xe4>;
+	reg-names = "dos", "esparser";
+
+	interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+		     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+	interrupt-names = "vdec", "esparser";
+
+	amlogic,ao-sysctrl = <&sysctrl_AO>;
+	amlogic,canvas = <&canvas>;
+
+	clocks = <&clkc CLKID_DOS_PARSER>,
+		 <&clkc CLKID_DOS>,
+		 <&clkc CLKID_VDEC_1>,
+		 <&clkc CLKID_VDEC_HEVC>;
+	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
+
+	resets = <&reset RESET_PARSER>;
+	reset-names = "esparser";
+};
diff --git a/dts/Bindings/media/imx7-csi.txt b/dts/Bindings/media/imx7-csi.txt
index 3c07bc676b..443aef0735 100644
--- a/dts/Bindings/media/imx7-csi.txt
+++ b/dts/Bindings/media/imx7-csi.txt
@@ -14,8 +14,7 @@ Required properties:
 - interrupts    : should contain CSI interrupt;
 - clocks        : list of clock specifiers, see
         Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
-- clock-names   : must contain "axi", "mclk" and "dcic" entries, matching
-                 entries in the clock property;
+- clock-names   : must contain "mclk";
 
 The device node shall contain one 'port' child node with one child 'endpoint'
 node, according to the bindings defined in:
@@ -32,10 +31,8 @@ example:
                         compatible = "fsl,imx7-csi";
                         reg = <0x30710000 0x10000>;
                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-                        clocks = <&clks IMX7D_CLK_DUMMY>,
-                                        <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
-                                        <&clks IMX7D_CLK_DUMMY>;
-                        clock-names = "axi", "mclk", "dcic";
+                        clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
+                        clock-names = "mclk";
 
                         port {
                                 csi_from_csi_mux: endpoint {
diff --git a/dts/Bindings/media/marvell,mmp2-ccic.txt b/dts/Bindings/media/marvell,mmp2-ccic.txt
new file mode 100644
index 0000000000..7ec2c8c8a3
--- /dev/null
+++ b/dts/Bindings/media/marvell,mmp2-ccic.txt
@@ -0,0 +1,50 @@
+Marvell MMP2 camera host interface
+
+Required properties:
+ - compatible: Should be "marvell,mmp2-ccic".
+ - reg: Register base and size.
+ - interrupts: The interrupt number.
+ - #clock-cells: Must be 0.
+
+Optional properties:
+ - clocks: Reference to the input clock as specified by
+           Documentation/devicetree/bindings/clock/clock-bindings.txt.
+ - clock-names: Names of the clocks used; "axi" for the AXI bus interface,
+                "func" for the peripheral clock and "phy" for the parallel
+                video bus interface.
+ - clock-output-names: Optional clock source for sensors. Shall be "mclk".
+
+Required subnodes:
+ - port: The parallel bus interface port with a single endpoint linked to
+         the sensor's endpoint as described in
+         Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Required endpoint properties:
+ - bus-type: data bus type, <5> or <6> for Parallel or Bt.656 respectively
+ - pclk-sample: pixel clock polarity
+ - hsync-active: horizontal synchronization polarity (only required for
+   parallel bus)
+ - vsync-active: vertical synchronization polarity (only required for
+   parallel bus)
+
+Example:
+
+	camera0: camera@d420a000 {
+		compatible = "marvell,mmp2-ccic";
+		reg = <0xd420a000 0x800>;
+		interrupts = <42>;
+		clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+		clock-names = "axi";
+		#clock-cells = <0>;
+		clock-output-names = "mclk";
+
+		port {
+			camera0_0: endpoint {
+				remote-endpoint = <&ov7670_0>;
+                                bus-type = <5>;      /* Parallel */
+                                hsync-active = <1>;  /* Active high */
+                                vsync-active = <1>;  /* Active high */
+                                pclk-sample = <0>;   /* Falling */
+			};
+		};
+	};
diff --git a/dts/Bindings/media/st,stm32-dcmi.txt b/dts/Bindings/media/st,stm32-dcmi.txt
index 249790a930..3122ded82e 100644
--- a/dts/Bindings/media/st,stm32-dcmi.txt
+++ b/dts/Bindings/media/st,stm32-dcmi.txt
@@ -11,7 +11,7 @@ Required properties:
 - clock-names: must contain "mclk", which is the DCMI peripherial clock
 - pinctrl: the pincontrol settings to configure muxing properly
            for pins that connect to DCMI device.
-           See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt.
+           See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml.
 - dmas: phandle to DMA controller node,
         see Documentation/devicetree/bindings/dma/stm32-dma.txt
 - dma-names: must contain "tx", which is the transmit channel from DCMI to DMA
diff --git a/dts/Bindings/media/sun6i-csi.txt b/dts/Bindings/media/sun6i-csi.txt
index 0dd540bb03..a2e3e56f02 100644
--- a/dts/Bindings/media/sun6i-csi.txt
+++ b/dts/Bindings/media/sun6i-csi.txt
@@ -6,6 +6,7 @@ Allwinner V3s SoC features a CSI module(CSI1) with parallel interface.
 Required properties:
   - compatible: value must be one of:
     * "allwinner,sun6i-a31-csi"
+    * "allwinner,sun8i-a83t-csi"
     * "allwinner,sun8i-h3-csi"
     * "allwinner,sun8i-v3s-csi"
     * "allwinner,sun50i-a64-csi"