diff options
| author | Sascha Hauer <s.hauer@pengutronix.de> | 2022-04-12 10:22:44 +0200 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2022-04-14 09:33:24 +0200 |
| commit | b01786baa849369ff2345c51e63857c952a01130 (patch) | |
| tree | 43970a0ff46d32b8cad45b1dc3f3ca638e04fc5e /dts/Bindings/media | |
| parent | 610797b376e65475f7aed1218a085ff8701da474 (diff) | |
| download | barebox-b01786baa849369ff2345c51e63857c952a01130.tar.gz barebox-b01786baa849369ff2345c51e63857c952a01130.tar.xz | |
dts: update to v5.18-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/media')
26 files changed, 1957 insertions, 435 deletions
diff --git a/dts/Bindings/media/allwinner,sun4i-a10-video-engine.yaml b/dts/Bindings/media/allwinner,sun4i-a10-video-engine.yaml index c3de96d103..ee7fc3515d 100644 --- a/dts/Bindings/media/allwinner,sun4i-a10-video-engine.yaml +++ b/dts/Bindings/media/allwinner,sun4i-a10-video-engine.yaml @@ -48,6 +48,10 @@ properties: allwinner,sram: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to SRAM + - description: register value for device description: Phandle to the device SRAM iommus: diff --git a/dts/Bindings/media/amphion,vpu.yaml b/dts/Bindings/media/amphion,vpu.yaml new file mode 100644 index 0000000000..a9d80eaeee --- /dev/null +++ b/dts/Bindings/media/amphion,vpu.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/amphion,vpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amphion VPU codec IP + +maintainers: + - Ming Qian <ming.qian@nxp.com> + - Shijie Qin <shijie.qin@nxp.com> + +description: |- + The Amphion MXC video encoder(Windsor) and decoder(Malone) accelerators present + on NXP i.MX8Q SoCs. + +properties: + $nodename: + pattern: "^vpu@[0-9a-f]+$" + + compatible: + items: + - enum: + - nxp,imx8qm-vpu + - nxp,imx8qxp-vpu + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^mailbox@[0-9a-f]+$": + description: + Each vpu encoder or decoder correspond a MU, which used for communication + between driver and firmware. Implement via mailbox on driver. + $ref: ../mailbox/fsl,mu.yaml# + + + "^vpu_core@[0-9a-f]+$": + description: + Each core correspond a decoder or encoder, need to configure them + separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC + has one decoder and one encoder. + type: object + + properties: + compatible: + items: + - enum: + - nxp,imx8q-vpu-decoder + - nxp,imx8q-vpu-encoder + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + mbox-names: + items: + - const: tx0 + - const: tx1 + - const: rx + + mboxes: + description: + List of phandle of 2 MU channels for tx, 1 MU channel for rx. + maxItems: 3 + + memory-region: + description: + Phandle to the reserved memory nodes to be associated with the + remoteproc device. The reserved memory nodes should be carveout nodes, + and should be defined as per the bindings in + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + items: + - description: region reserved for firmware image sections. + - description: region used for RPC shared memory between firmware and + driver. + + required: + - compatible + - reg + - power-domains + - mbox-names + - mboxes + - memory-region + + additionalProperties: false + +required: + - compatible + - reg + - power-domains + +additionalProperties: false + +examples: + # Device node example for i.MX8QM platform: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + + vpu: vpu@2c000000 { + compatible = "nxp,imx8qm-vpu"; + ranges = <0x2c000000 0x2c000000 0x2000000>; + reg = <0x2c000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&pd IMX_SC_R_VPU>; + + mu_m0: mailbox@2d000000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d000000 0x20000>; + interrupts = <0 472 4>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_0>; + }; + + mu1_m0: mailbox@2d020000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d020000 0x20000>; + interrupts = <0 473 4>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_1>; + }; + + mu2_m0: mailbox@2d040000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d040000 0x20000>; + interrupts = <0 474 4>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_2>; + }; + + vpu_core0: vpu_core@2d080000 { + compatible = "nxp,imx8q-vpu-decoder"; + reg = <0x2d080000 0x10000>; + power-domains = <&pd IMX_SC_R_VPU_DEC_0>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu_m0 0 0>, + <&mu_m0 0 1>, + <&mu_m0 1 0>; + memory-region = <&decoder_boot>, <&decoder_rpc>; + }; + + vpu_core1: vpu_core@2d090000 { + compatible = "nxp,imx8q-vpu-encoder"; + reg = <0x2d090000 0x10000>; + power-domains = <&pd IMX_SC_R_VPU_ENC_0>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu1_m0 0 0>, + <&mu1_m0 0 1>, + <&mu1_m0 1 0>; + memory-region = <&encoder1_boot>, <&encoder1_rpc>; + }; + + vpu_core2: vpu_core@2d0a0000 { + reg = <0x2d0a0000 0x10000>; + compatible = "nxp,imx8q-vpu-encoder"; + power-domains = <&pd IMX_SC_R_VPU_ENC_1>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu2_m0 0 0>, + <&mu2_m0 0 1>, + <&mu2_m0 1 0>; + memory-region = <&encoder2_boot>, <&encoder2_rpc>; + }; + }; + +... diff --git a/dts/Bindings/media/i2c/hynix,hi846.yaml b/dts/Bindings/media/i2c/hynix,hi846.yaml index 85a8877c2f..1e2df8cf29 100644 --- a/dts/Bindings/media/i2c/hynix,hi846.yaml +++ b/dts/Bindings/media/i2c/hynix,hi846.yaml @@ -49,7 +49,8 @@ properties: description: Definition of the regulator used for the VDDD power supply. port: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false properties: endpoint: @@ -68,8 +69,11 @@ properties: - const: 1 - const: 2 + link-frequencies: true + required: - data-lanes + - link-frequencies required: - compatible diff --git a/dts/Bindings/media/i2c/isil,isl79987.yaml b/dts/Bindings/media/i2c/isil,isl79987.yaml new file mode 100644 index 0000000000..034a6e3466 --- /dev/null +++ b/dts/Bindings/media/i2c/isil,isl79987.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/isil,isl79987.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intersil ISL79987 Analog to MIPI CSI-2 decoder + +maintainers: + - Michael Tretter <m.tretter@pengutronix.de> + - Marek Vasut <marex@denx.de> + +description: + The Intersil ISL79987 is an analog to MIPI CSI-2 decoder which is capable of + receiving up to four analog stream and multiplexing them into up to four MIPI + CSI-2 virtual channels, using one MIPI clock lane and 1/2 data lanes. + +properties: + compatible: + enum: + - isil,isl79987 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: + A GPIO spec for the RSTB pin (active high) + + powerdown-gpios: + maxItems: 1 + description: + A GPIO spec for the Power Down pin (active high) + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 2 + + required: + - data-lanes + + patternProperties: + "^port@[1-4]$": + $ref: /schemas/graph.yaml#/properties/port + description: Input ports + + required: + - port@0 + +additionalProperties: false + +required: + - compatible + - reg + - ports + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + isl7998x_mipi@44 { + compatible = "isil,isl79987"; + reg = <0x44>; + powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + isl79987_out: endpoint { + remote-endpoint = <&mipi_csi2_in>; + data-lanes = <1 2>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&camera_0>; + }; + }; + + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&camera_1>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/media/i2c/maxim,max9286.yaml b/dts/Bindings/media/i2c/maxim,max9286.yaml index 02f656e787..90315e2170 100644 --- a/dts/Bindings/media/i2c/maxim,max9286.yaml +++ b/dts/Bindings/media/i2c/maxim,max9286.yaml @@ -70,6 +70,28 @@ properties: a remote serializer whose high-threshold noise immunity is not enabled is 100000 micro volts + maxim,gpio-poc: + $ref: '/schemas/types.yaml#/definitions/uint32-array' + minItems: 2 + maxItems: 2 + description: | + Index of the MAX9286 gpio output line (0 or 1) that controls Power over + Coax to the cameras and its associated polarity flag. + + The property accepts an array of two unsigned integers, the first being + the gpio line index (0 or 1) and the second being the gpio line polarity + flag (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW) as defined in + <include/dt-bindings/gpio/gpio.h>. + + When the remote cameras power is controlled by one of the MAX9286 gpio + lines, this property has to be used to specify which line among the two + available ones controls the remote camera power enablement. + + When this property is used it is not possible to register a gpio + controller as the gpio lines are controlled directly by the MAX9286 and + not available for consumers, nor the 'poc-supply' property should be + specified. + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -165,7 +187,16 @@ required: - reg - ports - i2c-mux - - gpio-controller + +# If 'maxim,gpio-poc' is present, then 'poc-supply' and 'gpio-controller' +# are not allowed. +if: + required: + - maxim,gpio-poc +then: + properties: + poc-supply: false + gpio-controller: false additionalProperties: false @@ -174,140 +205,174 @@ examples: #include <dt-bindings/gpio/gpio.h> i2c@e66d8000 { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - reg = <0 0xe66d8000>; + reg = <0 0xe66d8000>; - gmsl-deserializer@2c { - compatible = "maxim,max9286"; - reg = <0x2c>; - poc-supply = <&camera_poc_12v>; - enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + gmsl-deserializer@2c { + compatible = "maxim,max9286"; + reg = <0x2c>; + poc-supply = <&camera_poc_12v>; + enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; - gpio-controller; - #gpio-cells = <2>; + gpio-controller; + #gpio-cells = <2>; - maxim,reverse-channel-microvolt = <170000>; + maxim,reverse-channel-microvolt = <170000>; - ports { - #address-cells = <1>; - #size-cells = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - port@0 { - reg = <0>; + port@0 { + reg = <0>; - max9286_in0: endpoint { - remote-endpoint = <&rdacm20_out0>; - }; - }; + max9286_in0: endpoint { + remote-endpoint = <&rdacm20_out0>; + }; + }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - max9286_in1: endpoint { - remote-endpoint = <&rdacm20_out1>; - }; - }; + max9286_in1: endpoint { + remote-endpoint = <&rdacm20_out1>; + }; + }; - port@2 { - reg = <2>; + port@2 { + reg = <2>; - max9286_in2: endpoint { - remote-endpoint = <&rdacm20_out2>; - }; - }; + max9286_in2: endpoint { + remote-endpoint = <&rdacm20_out2>; + }; + }; - port@3 { - reg = <3>; + port@3 { + reg = <3>; - max9286_in3: endpoint { - remote-endpoint = <&rdacm20_out3>; - }; - }; + max9286_in3: endpoint { + remote-endpoint = <&rdacm20_out3>; + }; + }; - port@4 { - reg = <4>; + port@4 { + reg = <4>; - max9286_out: endpoint { - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi40_in>; + max9286_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; }; - }; - }; - i2c-mux { - #address-cells = <1>; - #size-cells = <0>; + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; - camera@51 { - compatible = "imi,rdacm20"; - reg = <0x51>, <0x61>; + camera@51 { + compatible = "imi,rdacm20"; + reg = <0x51>, <0x61>; - port { - rdacm20_out0: endpoint { - remote-endpoint = <&max9286_in0>; - }; - }; + port { + rdacm20_out0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; - }; - }; + }; + }; - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + camera@52 { + compatible = "imi,rdacm20"; + reg = <0x52>, <0x62>; + + port { + rdacm20_out1: endpoint { + remote-endpoint = <&max9286_in1>; + }; + }; + }; + }; - camera@52 { - compatible = "imi,rdacm20"; - reg = <0x52>, <0x62>; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + camera@53 { + compatible = "imi,rdacm20"; + reg = <0x53>, <0x63>; + + port { + rdacm20_out2: endpoint { + remote-endpoint = <&max9286_in2>; + }; + }; + }; + }; - port { - rdacm20_out1: endpoint { - remote-endpoint = <&max9286_in1>; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + camera@54 { + compatible = "imi,rdacm20"; + reg = <0x54>, <0x64>; + + port { + rdacm20_out3: endpoint { + remote-endpoint = <&max9286_in3>; + }; + }; + }; }; - }; }; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - camera@53 { - compatible = "imi,rdacm20"; - reg = <0x53>, <0x63>; + }; - port { - rdacm20_out2: endpoint { - remote-endpoint = <&max9286_in2>; + /* + * Example of a deserializer that controls the camera Power over Coax + * through one of its gpio lines. + */ + gmsl-deserializer@6c { + compatible = "maxim,max9286"; + reg = <0x6c>; + enable-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + + /* + * The remote camera power is controlled by MAX9286 GPIO line #0. + * No 'poc-supply' nor 'gpio-controller' are specified. + */ + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + + /* + * Do not describe connections as they're the same as in the previous + * example. + */ + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; }; - }; }; - }; - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - camera@54 { - compatible = "imi,rdacm20"; - reg = <0x54>, <0x64>; - - port { - rdacm20_out3: endpoint { - remote-endpoint = <&max9286_in3>; - }; - }; + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; }; - }; }; - }; }; diff --git a/dts/Bindings/media/mediatek,vcodec-decoder.yaml b/dts/Bindings/media/mediatek,vcodec-decoder.yaml new file mode 100644 index 0000000000..9b179bb44d --- /dev/null +++ b/dts/Bindings/media/mediatek,vcodec-decoder.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,vcodec-decoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Video Decode Accelerator + +maintainers: + - Yunfei Dong <yunfei.dong@mediatek.com> + +description: |+ + Mediatek Video Decode is the video decode hardware present in Mediatek + SoCs which supports high resolution decoding functionalities. + +properties: + compatible: + enum: + - mediatek,mt8173-vcodec-dec + - mediatek,mt8183-vcodec-dec + + reg: + maxItems: 12 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 8 + + clock-names: + items: + - const: vcodecpll + - const: univpll_d2 + - const: clk_cci400_sel + - const: vdec_sel + - const: vdecpll + - const: vencpll + - const: venc_lt_sel + - const: vdec_bus_clk_src + + assigned-clocks: true + + assigned-clock-parents: true + + assigned-clock-rates: true + + power-domains: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 32 + description: | + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + dma-ranges: + maxItems: 1 + description: | + Describes the physical address space of IOMMU maps to memory. + + mediatek,vpu: + $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 + description: + Describes point to vpu. + + mediatek,scp: + $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 + description: + Describes point to scp. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - iommus + - assigned-clocks + - assigned-clock-parents + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8183-vcodec-dec + + then: + required: + - mediatek,scp + + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8173-vcodec-dec + + then: + required: + - mediatek,vpu + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/memory/mt8173-larb-port.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt8173-power.h> + + vcodec_dec: vcodec@16000000 { + compatible = "mediatek,mt8173-vcodec-dec"; + reg = <0x16000000 0x100>, /*VDEC_SYS*/ + <0x16020000 0x1000>, /*VDEC_MISC*/ + <0x16021000 0x800>, /*VDEC_LD*/ + <0x16021800 0x800>, /*VDEC_TOP*/ + <0x16022000 0x1000>, /*VDEC_CM*/ + <0x16023000 0x1000>, /*VDEC_AD*/ + <0x16024000 0x1000>, /*VDEC_AV*/ + <0x16025000 0x1000>, /*VDEC_PP*/ + <0x16026800 0x800>, /*VP8_VD*/ + <0x16027000 0x800>, /*VP6_VD*/ + <0x16027800 0x800>, /*VP8_VL*/ + <0x16028400 0x400>; /*VP9_VD*/ + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; + iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, + <&iommu M4U_PORT_HW_VDEC_PP_EXT>, + <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>, + <&iommu M4U_PORT_HW_VDEC_UFO_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; + mediatek,vpu = <&vpu>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; + clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, + <&topckgen CLK_TOP_UNIVPLL_D2>, + <&topckgen CLK_TOP_CCI400_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>, + <&topckgen CLK_TOP_VCODECPLL>, + <&apmixedsys CLK_APMIXED_VENCPLL>, + <&topckgen CLK_TOP_VENC_LT_SEL>, + <&topckgen CLK_TOP_VCODECPLL_370P5>; + clock-names = "vcodecpll", + "univpll_d2", + "clk_cci400_sel", + "vdec_sel", + "vdecpll", + "vencpll", + "venc_lt_sel", + "vdec_bus_clk_src"; + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>, + <&topckgen CLK_TOP_CCI400_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>, + <&apmixedsys CLK_APMIXED_VCODECPLL>, + <&apmixedsys CLK_APMIXED_VENCPLL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>, + <&topckgen CLK_TOP_UNIVPLL_D2>, + <&topckgen CLK_TOP_VCODECPLL>; + assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>; + }; diff --git a/dts/Bindings/media/mediatek,vcodec-encoder.yaml b/dts/Bindings/media/mediatek,vcodec-encoder.yaml new file mode 100644 index 0000000000..e7b65a91c9 --- /dev/null +++ b/dts/Bindings/media/mediatek,vcodec-encoder.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,vcodec-encoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Video Encode Accelerator + +maintainers: + - Yunfei Dong <yunfei.dong@mediatek.com> + +description: |+ + Mediatek Video Encode is the video encode hardware present in Mediatek + SoCs which supports high resolution encoding functionalities. + +properties: + compatible: + enum: + - mediatek,mt8173-vcodec-enc-vp8 + - mediatek,mt8173-vcodec-enc + - mediatek,mt8183-vcodec-enc + - mediatek,mt8192-vcodec-enc + - mediatek,mt8195-vcodec-enc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + assigned-clocks: true + + assigned-clock-parents: true + + iommus: + minItems: 1 + maxItems: 32 + description: | + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + dma-ranges: + maxItems: 1 + description: | + Describes the physical address space of IOMMU maps to memory. + + mediatek,vpu: + $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 + description: + Describes point to vpu. + + mediatek,scp: + $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 + description: + Describes point to scp. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - iommus + - assigned-clocks + - assigned-clock-parents + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8183-vcodec-enc + - mediatek,mt8192-vcodec-enc + + then: + required: + - mediatek,scp + + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8173-vcodec-enc-vp8 + - mediatek,mt8173-vcodec-enc + + then: + required: + - mediatek,vpu + + - if: + properties: + compatible: + enum: + - mediatek,mt8173-vcodec-enc + - mediatek,mt8192-vcodec-enc + - mediatek,mt8173-vcodec-enc + + then: + properties: + clock: + items: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: venc_sel + else: # for vp8 hw decoder + properties: + clock: + items: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: venc_lt_sel + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/memory/mt8173-larb-port.h> + #include <dt-bindings/interrupt-controller/irq.h> + + vcodec_enc_avc: vcodec@18002000 { + compatible = "mediatek,mt8173-vcodec-enc"; + reg = <0x18002000 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; + iommus = <&iommu M4U_PORT_VENC_RCPU>, + <&iommu M4U_PORT_VENC_REC>, + <&iommu M4U_PORT_VENC_BSDMA>, + <&iommu M4U_PORT_VENC_SV_COMV>, + <&iommu M4U_PORT_VENC_RD_COMV>, + <&iommu M4U_PORT_VENC_CUR_LUMA>, + <&iommu M4U_PORT_VENC_CUR_CHROMA>, + <&iommu M4U_PORT_VENC_REF_LUMA>, + <&iommu M4U_PORT_VENC_REF_CHROMA>, + <&iommu M4U_PORT_VENC_NBM_RDMA>, + <&iommu M4U_PORT_VENC_NBM_WDMA>; + mediatek,vpu = <&vpu>; + clocks = <&topckgen CLK_TOP_VENC_SEL>; + clock-names = "venc_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>; + }; + + vcodec_enc_vp8: vcodec@19002000 { + compatible = "mediatek,mt8173-vcodec-enc-vp8"; + reg = <0x19002000 0x1000>; /* VENC_LT_SYS */ + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>; + iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>, + <&iommu M4U_PORT_VENC_REC_FRM_SET2>, + <&iommu M4U_PORT_VENC_BSDMA_SET2>, + <&iommu M4U_PORT_VENC_SV_COMA_SET2>, + <&iommu M4U_PORT_VENC_RD_COMA_SET2>, + <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>, + <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>, + <&iommu M4U_PORT_VENC_REF_LUMA_SET2>, + <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>; + mediatek,vpu = <&vpu>; + clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "venc_lt_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>; + }; diff --git a/dts/Bindings/media/mediatek,vcodec-subdev-decoder.yaml b/dts/Bindings/media/mediatek,vcodec-subdev-decoder.yaml new file mode 100644 index 0000000000..7687be0f50 --- /dev/null +++ b/dts/Bindings/media/mediatek,vcodec-subdev-decoder.yaml @@ -0,0 +1,271 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Mediatek Video Decode Accelerator With Multi Hardware + +maintainers: + - Yunfei Dong <yunfei.dong@mediatek.com> + +description: | + Mediatek Video Decode is the video decode hardware present in Mediatek + SoCs which supports high resolution decoding functionalities. Required + parent and child device node. + + About the Decoder Hardware Block Diagram, please check below: + + +---------------------------------+------------------------------------+ + | | | + | input -> lat HW -> lat buffer --|--> lat buffer -> core HW -> output | + | || | || | + +------------||-------------------+---------------------||-------------+ + lat workqueue | core workqueue <parent> + -------------||-----------------------------------------||------------------ + || || <child> + \/ <----------------HW index-------------->\/ + +------------------------------------------------------+ + | enable/disable | + | clk power irq iommu | + | (lat/lat soc/core0/core1) | + +------------------------------------------------------+ + + As above, there are parent and child devices, child mean each hardware. The child device + controls the information of each hardware independent which include clk/power/irq. + + There are two workqueues in parent device: lat workqueue and core workqueue. They are used + to lat and core hardware deocder. Lat workqueue need to get input bitstream and lat buffer, + then enable lat to decode, writing the result to lat buffer, dislabe hardware when lat decode + done. Core workqueue need to get lat buffer and output buffer, then enable core to decode, + writing the result to output buffer, disable hardware when core decode done. These two + hardwares will decode each frame cyclically. + + For the smi common may not the same for each hardware, can't combine all hardware in one node, + or leading to iommu fault when access dram data. + +properties: + compatible: + const: mediatek,mt8192-vcodec-dec + + reg: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 32 + description: | + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + mediatek,scp: + $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 + description: | + The node of system control processor (SCP), using + the remoteproc & rpmsg framework. + + dma-ranges: + maxItems: 1 + description: | + Describes the physical address space of IOMMU maps to memory. + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + +# Required child node: +patternProperties: + '^vcodec-lat@[0-9a-f]+$': + type: object + + properties: + compatible: + const: mediatek,mtk-vcodec-lat + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 32 + description: | + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + clocks: + maxItems: 5 + + clock-names: + items: + - const: sel + - const: soc-vdec + - const: soc-lat + - const: vdec + - const: top + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + power-domains: + maxItems: 1 + + required: + - compatible + - reg + - interrupts + - iommus + - clocks + - clock-names + - assigned-clocks + - assigned-clock-parents + - power-domains + + additionalProperties: false + + '^vcodec-core@[0-9a-f]+$': + type: object + + properties: + compatible: + const: mediatek,mtk-vcodec-core + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 32 + description: | + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + clocks: + maxItems: 5 + + clock-names: + items: + - const: sel + - const: soc-vdec + - const: soc-lat + - const: vdec + - const: top + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + power-domains: + maxItems: 1 + + required: + - compatible + - reg + - interrupts + - iommus + - clocks + - clock-names + - assigned-clocks + - assigned-clock-parents + - power-domains + + additionalProperties: false + +required: + - compatible + - reg + - iommus + - mediatek,scp + - dma-ranges + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/mt8192-larb-port.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt8192-clk.h> + #include <dt-bindings/power/mt8192-power.h> + + bus@16000000 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0x16000000 0x16000000 0 0x40000>; + + video-codec@16000000 { + compatible = "mediatek,mt8192-vcodec-dec"; + mediatek,scp = <&scp>; + iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>; + dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0x16000000 0 0x40000>; + reg = <0 0x16000000 0 0x1000>; /* VDEC_SYS */ + vcodec-lat@10000 { + compatible = "mediatek,mtk-vcodec-lat"; + reg = <0 0x10000 0 0x800>; + interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>; + clocks = <&topckgen CLK_TOP_VDEC_SEL>, + <&vdecsys_soc CLK_VDEC_SOC_VDEC>, + <&vdecsys_soc CLK_VDEC_SOC_LAT>, + <&vdecsys_soc CLK_VDEC_SOC_LARB1>, + <&topckgen CLK_TOP_MAINPLL_D4>; + clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top"; + assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>; + power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>; + }; + + vcodec-core@25000 { + compatible = "mediatek,mtk-vcodec-core"; + reg = <0 0x25000 0 0x1000>; + interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>; + clocks = <&topckgen CLK_TOP_VDEC_SEL>, + <&vdecsys CLK_VDEC_VDEC>, + <&vdecsys CLK_VDEC_LAT>, + <&vdecsys CLK_VDEC_LARB1>, + <&topckgen CLK_TOP_MAINPLL_D4>; + clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top"; + assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>; + power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>; + }; + }; + }; diff --git a/dts/Bindings/media/mediatek-jpeg-decoder.txt b/dts/Bindings/media/mediatek-jpeg-decoder.txt deleted file mode 100644 index 39c1028b2d..0000000000 --- a/dts/Bindings/media/mediatek-jpeg-decoder.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Mediatek JPEG Decoder - -Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs - -Required properties: -- compatible : must be one of the following string: - "mediatek,mt8173-jpgdec" - "mediatek,mt7623-jpgdec", "mediatek,mt2701-jpgdec" - "mediatek,mt2701-jpgdec" -- reg : physical base address of the jpeg decoder registers and length of - memory mapped region. -- interrupts : interrupt number to the interrupt controller. -- clocks: device clocks, see - Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: must contain "jpgdec-smi" and "jpgdec". -- power-domains: a phandle to the power domain, see - Documentation/devicetree/bindings/power/power_domain.txt for details. -- mediatek,larb: must contain the local arbiters in the current Socs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml - for details. -- iommus: should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml - for details. - -Example: - jpegdec: jpegdec@15004000 { - compatible = "mediatek,mt2701-jpgdec"; - reg = <0 0x15004000 0 0x1000>; - interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; - clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, - <&imgsys CLK_IMG_JPGDEC>; - clock-names = "jpgdec-smi", - "jpgdec"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; - iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, - <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; - }; diff --git a/dts/Bindings/media/mediatek-jpeg-decoder.yaml b/dts/Bindings/media/mediatek-jpeg-decoder.yaml new file mode 100644 index 0000000000..052e752157 --- /dev/null +++ b/dts/Bindings/media/mediatek-jpeg-decoder.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek-jpeg-decoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek JPEG Decoder Device Tree Bindings + +maintainers: + - Xia Jiang <xia.jiang@mediatek.com> + +description: |- + Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt8173-jpgdec + - mediatek,mt2701-jpgdec + - items: + - enum: + - mediatek,mt7623-jpgdec + - const: mediatek,mt2701-jpgdec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + minItems: 2 + + clock-names: + items: + - const: jpgdec-smi + - const: jpgdec + + power-domains: + maxItems: 1 + + iommus: + maxItems: 2 + description: | + Points to the respective IOMMU block with master port as argument, see + Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + Ports are according to the HW. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/mt2701-larb-port.h> + #include <dt-bindings/power/mt2701-power.h> + jpegdec: jpegdec@15004000 { + compatible = "mediatek,mt2701-jpgdec"; + reg = <0x15004000 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, + <&imgsys CLK_IMG_JPGDEC>; + clock-names = "jpgdec-smi", + "jpgdec"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; + }; diff --git a/dts/Bindings/media/mediatek-jpeg-encoder.txt b/dts/Bindings/media/mediatek-jpeg-encoder.txt deleted file mode 100644 index 5e53c6ab52..0000000000 --- a/dts/Bindings/media/mediatek-jpeg-encoder.txt +++ /dev/null @@ -1,35 +0,0 @@ -* MediaTek JPEG Encoder - -MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs - -Required properties: -- compatible : "mediatek,mt2701-jpgenc" - followed by "mediatek,mtk-jpgenc" -- reg : physical base address of the JPEG encoder registers and length of - memory mapped region. -- interrupts : interrupt number to the interrupt controller. -- clocks: device clocks, see - Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: must contain "jpgenc". It is the clock of JPEG encoder. -- power-domains: a phandle to the power domain, see - Documentation/devicetree/bindings/power/power_domain.txt for details. -- mediatek,larb: must contain the local arbiters in the current SoCs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml - for details. -- iommus: should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml - for details. - -Example: - jpegenc: jpegenc@1500a000 { - compatible = "mediatek,mt2701-jpgenc", - "mediatek,mtk-jpgenc"; - reg = <0 0x1500a000 0 0x1000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>; - clocks = <&imgsys CLK_IMG_VENC>; - clock-names = "jpgenc"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; - iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>, - <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>; - }; diff --git a/dts/Bindings/media/mediatek-jpeg-encoder.yaml b/dts/Bindings/media/mediatek-jpeg-encoder.yaml new file mode 100644 index 0000000000..8bfdfdfaba --- /dev/null +++ b/dts/Bindings/media/mediatek-jpeg-encoder.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek-jpeg-encoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek JPEG Encoder Device Tree Bindings + +maintainers: + - Xia Jiang <xia.jiang@mediatek.com> + +description: |- + MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs + +properties: + compatible: + items: + - enum: + - mediatek,mt2701-jpgenc + - mediatek,mt8183-jpgenc + - const: mediatek,mtk-jpgenc + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: jpgenc + + power-domains: + maxItems: 1 + + iommus: + maxItems: 2 + description: | + Points to the respective IOMMU block with master port as argument, see + Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + Ports are according to the HW. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/mt2701-larb-port.h> + #include <dt-bindings/power/mt2701-power.h> + jpegenc: jpegenc@1500a000 { + compatible = "mediatek,mt2701-jpgenc", + "mediatek,mtk-jpgenc"; + reg = <0x1500a000 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_VENC>; + clock-names = "jpgenc"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>, + <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>; + }; diff --git a/dts/Bindings/media/mediatek-mdp.txt b/dts/Bindings/media/mediatek-mdp.txt index caa24943da..53ef26e2c8 100644 --- a/dts/Bindings/media/mediatek-mdp.txt +++ b/dts/Bindings/media/mediatek-mdp.txt @@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node): - iommus: should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. -- mediatek,larb: must contain the local arbiters in the current Socs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml - for details. Example: mdp_rdma0: rdma@14001000 { @@ -40,7 +37,6 @@ Example: <&mmsys CLK_MM_MUTEX_32K>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_RDMA0>; - mediatek,larb = <&larb0>; mediatek,vpu = <&vpu>; }; @@ -51,7 +47,6 @@ Example: <&mmsys CLK_MM_MUTEX_32K>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_RDMA1>; - mediatek,larb = <&larb4>; }; mdp_rsz0: rsz@14003000 { @@ -81,7 +76,6 @@ Example: clocks = <&mmsys CLK_MM_MDP_WDMA>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WDMA>; - mediatek,larb = <&larb0>; }; mdp_wrot0: wrot@14007000 { @@ -90,7 +84,6 @@ Example: clocks = <&mmsys CLK_MM_MDP_WROT0>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WROT0>; - mediatek,larb = <&larb0>; }; mdp_wrot1: wrot@14008000 { @@ -99,5 +92,4 @@ Example: clocks = <&mmsys CLK_MM_MDP_WROT1>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WROT1>; - mediatek,larb = <&larb4>; }; diff --git a/dts/Bindings/media/mediatek-vcodec.txt b/dts/Bindings/media/mediatek-vcodec.txt deleted file mode 100644 index 665a950870..0000000000 --- a/dts/Bindings/media/mediatek-vcodec.txt +++ /dev/null @@ -1,131 +0,0 @@ -Mediatek Video Codec - -Mediatek Video Codec is the video codec hw present in Mediatek SoCs which -supports high resolution encoding and decoding functionalities. - -Required properties: -- compatible : must be one of the following string: - "mediatek,mt8173-vcodec-enc-vp8" for mt8173 vp8 encoder. - "mediatek,mt8173-vcodec-enc" for mt8173 avc encoder. - "mediatek,mt8183-vcodec-enc" for MT8183 encoder. - "mediatek,mt8173-vcodec-dec" for MT8173 decoder. - "mediatek,mt8192-vcodec-enc" for MT8192 encoder. - "mediatek,mt8183-vcodec-dec" for MT8183 decoder. - "mediatek,mt8195-vcodec-enc" for MT8195 encoder. -- reg : Physical base address of the video codec registers and length of - memory mapped region. -- interrupts : interrupt number to the cpu. -- mediatek,larb : must contain the local arbiters in the current Socs. -- clocks : list of clock specifiers, corresponding to entries in - the clock-names property. -- clock-names: avc encoder must contain "venc_sel", vp8 encoder must - contain "venc_lt_sel", decoder must contain "vcodecpll", "univpll_d2", - "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll", "venc_lt_sel", - "vdec_bus_clk_src". -- iommus : should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml - for details. -- dma-ranges : describes the dma address range space that the codec hw access. -One of the two following nodes: -- mediatek,vpu : the node of the video processor unit, if using VPU. -- mediatek,scp : the node of the SCP unit, if using SCP. - - -Example: - -vcodec_dec: vcodec@16000000 { - compatible = "mediatek,mt8173-vcodec-dec"; - reg = <0 0x16000000 0 0x100>, /*VDEC_SYS*/ - <0 0x16020000 0 0x1000>, /*VDEC_MISC*/ - <0 0x16021000 0 0x800>, /*VDEC_LD*/ - <0 0x16021800 0 0x800>, /*VDEC_TOP*/ - <0 0x16022000 0 0x1000>, /*VDEC_CM*/ - <0 0x16023000 0 0x1000>, /*VDEC_AD*/ - <0 0x16024000 0 0x1000>, /*VDEC_AV*/ - <0 0x16025000 0 0x1000>, /*VDEC_PP*/ - <0 0x16026800 0 0x800>, /*VP8_VD*/ - <0 0x16027000 0 0x800>, /*VP6_VD*/ - <0 0x16027800 0 0x800>, /*VP8_VL*/ - <0 0x16028400 0 0x400>; /*VP9_VD*/ - interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; - mediatek,larb = <&larb1>; - iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, - <&iommu M4U_PORT_HW_VDEC_PP_EXT>, - <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>, - <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>, - <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>, - <&iommu M4U_PORT_HW_VDEC_UFO_EXT>, - <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, - <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; - mediatek,vpu = <&vpu>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; - clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, - <&topckgen CLK_TOP_UNIVPLL_D2>, - <&topckgen CLK_TOP_CCI400_SEL>, - <&topckgen CLK_TOP_VDEC_SEL>, - <&topckgen CLK_TOP_VCODECPLL>, - <&apmixedsys CLK_APMIXED_VENCPLL>, - <&topckgen CLK_TOP_VENC_LT_SEL>, - <&topckgen CLK_TOP_VCODECPLL_370P5>; - clock-names = "vcodecpll", - "univpll_d2", - "clk_cci400_sel", - "vdec_sel", - "vdecpll", - "vencpll", - "venc_lt_sel", - "vdec_bus_clk_src"; - assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>, - <&topckgen CLK_TOP_CCI400_SEL>, - <&topckgen CLK_TOP_VDEC_SEL>, - <&apmixedsys CLK_APMIXED_VCODECPLL>, - <&apmixedsys CLK_APMIXED_VENCPLL>; - assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>, - <&topckgen CLK_TOP_UNIVPLL_D2>, - <&topckgen CLK_TOP_VCODECPLL>; - assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>; - }; - -vcodec_enc_avc: vcodec@18002000 { - compatible = "mediatek,mt8173-vcodec-enc"; - reg = <0 0x18002000 0 0x1000>; - interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; - iommus = <&iommu M4U_PORT_VENC_RCPU>, - <&iommu M4U_PORT_VENC_REC>, - <&iommu M4U_PORT_VENC_BSDMA>, - <&iommu M4U_PORT_VENC_SV_COMV>, - <&iommu M4U_PORT_VENC_RD_COMV>, - <&iommu M4U_PORT_VENC_CUR_LUMA>, - <&iommu M4U_PORT_VENC_CUR_CHROMA>, - <&iommu M4U_PORT_VENC_REF_LUMA>, - <&iommu M4U_PORT_VENC_REF_CHROMA>, - <&iommu M4U_PORT_VENC_NBM_RDMA>, - <&iommu M4U_PORT_VENC_NBM_WDMA>; - mediatek,larb = <&larb3>; - mediatek,vpu = <&vpu>; - clocks = <&topckgen CLK_TOP_VENC_SEL>; - clock-names = "venc_sel"; - assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>; - }; - -vcodec_enc_vp8: vcodec@19002000 { - compatible = "mediatek,mt8173-vcodec-enc-vp8"; - reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */ - interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>; - iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>, - <&iommu M4U_PORT_VENC_REC_FRM_SET2>, - <&iommu M4U_PORT_VENC_BSDMA_SET2>, - <&iommu M4U_PORT_VENC_SV_COMA_SET2>, - <&iommu M4U_PORT_VENC_RD_COMA_SET2>, - <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>, - <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>, - <&iommu M4U_PORT_VENC_REF_LUMA_SET2>, - <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>; - mediatek,larb = <&larb5>; - mediatek,vpu = <&vpu>; - clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; - clock-names = "venc_lt_sel"; - assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>; - }; diff --git a/dts/Bindings/media/microchip,csi2dc.yaml b/dts/Bindings/media/microchip,csi2dc.yaml new file mode 100644 index 0000000000..e8544fb2d0 --- /dev/null +++ b/dts/Bindings/media/microchip,csi2dc.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/microchip,csi2dc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip CSI2 Demux Controller (CSI2DC) + +maintainers: + - Eugen Hristev <eugen.hristev@microchip.com> + +description: + CSI2DC - Camera Serial Interface 2 Demux Controller + + CSI2DC is a hardware block that receives incoming data from either from an + IDI interface or from a parallel bus interface. + It filters IDI packets based on their data type and virtual channel + identifier, then converts the byte stream to a pixel stream into a cross + clock domain towards a parallel interface that can be read by a sensor + controller. + IDI interface is Synopsys proprietary. + CSI2DC can act a simple bypass bridge if the incoming data is coming from + a parallel interface. + + CSI2DC provides two pipes, one video pipe and one data pipe. Video pipe + is connected at the output to a sensor controller and the data pipe is + accessible as a DMA slave port to a DMA controller. + + CSI2DC supports a single 'port' node as a sink port with either Synopsys + 32-bit IDI interface or a parallel interface. + + CSI2DC supports one 'port' node as source port with parallel interface. + This is called video pipe. + This port has an 'endpoint' that can be connected to a sink port of another + controller (next in pipeline). + + CSI2DC also supports direct access to the data through AHB, via DMA channel, + called data pipe. + For data pipe to be available, a dma controller and a dma channel must be + referenced. + +properties: + compatible: + const: microchip,sama7g5-csi2dc + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + description: + CSI2DC must have two clocks to function correctly. One clock is the + peripheral clock for the inside functionality of the hardware block. + This is named 'pclk'. The second clock must be the cross domain clock, + in which CSI2DC will perform clock crossing. This clock must be fed + by the next controller in pipeline, which usually is a sensor controller. + Normally this clock should be given by this sensor controller who + is also a clock source. This clock is named 'scck', sensor controller clock. + items: + - const: pclk + - const: scck + + dmas: + maxItems: 1 + + dma-names: + const: rx + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Input port node, single endpoint describing the input port. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + description: Endpoint connected to input device + + properties: + bus-type: + enum: [4, 5, 6] + default: 4 + + bus-width: + enum: [8, 9, 10, 11, 12, 13, 14] + default: 14 + + clock-noncontinuous: + type: boolean + description: + Presence of this boolean property decides whether clock is + continuous or noncontinuous. + + remote-endpoint: true + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Output port node, single endpoint describing the output port. + + properties: + endpoint: + unevaluatedProperties: false + $ref: video-interfaces.yaml# + description: Endpoint connected to output device + + properties: + bus-type: + enum: [5, 6] + default: 5 + + bus-width: + enum: [8, 9, 10, 11, 12, 13, 14] + default: 14 + + remote-endpoint: true + + required: + - port@0 + - port@1 + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - ports + +examples: + # Example for connecting to a parallel sensor controller block (video pipe) + # and the input is received from Synopsys IDI interface + - | + csi2dc@e1404000 { + compatible = "microchip,sama7g5-csi2dc"; + reg = <0xe1404000 0x500>; + clocks = <&pclk>, <&scck>; + clock-names = "pclk", "scck"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; /* must be 0, first child port */ + csi2dc_in: endpoint { /* input from IDI interface */ + bus-type = <4>; /* MIPI CSI2 D-PHY */ + remote-endpoint = <&csi2host_out>; + }; + }; + + port@1 { + reg = <1>; /* must be 1, second child port */ + csi2dc_out: endpoint { + remote-endpoint = <&xisc_in>; /* output to sensor controller */ + }; + }; + }; + }; + + # Example for connecting to a DMA master as an AHB slave + # and the input is received from Synopsys IDI interface + - | + #include <dt-bindings/dma/at91.h> + csi2dc@e1404000 { + compatible = "microchip,sama7g5-csi2dc"; + reg = <0xe1404000 0x500>; + clocks = <&pclk>, <&scck>; + clock-names = "pclk", "scck"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>; + dma-names = "rx"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; /* must be 0, first child port */ + csi2dc_input: endpoint { /* input from IDI interface */ + remote-endpoint = <&csi2host_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + +... diff --git a/dts/Bindings/media/nxp,imx7-mipi-csi2.yaml b/dts/Bindings/media/nxp,imx-mipi-csi2.yaml index e2e6e9aa0f..36b135bf9f 100644 --- a/dts/Bindings/media/nxp,imx7-mipi-csi2.yaml +++ b/dts/Bindings/media/nxp,imx-mipi-csi2.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml# +$id: http://devicetree.org/schemas/media/nxp,imx-mipi-csi2.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver diff --git a/dts/Bindings/media/nxp,imx7-csi.yaml b/dts/Bindings/media/nxp,imx7-csi.yaml index 5922a27951..4f7b782653 100644 --- a/dts/Bindings/media/nxp,imx7-csi.yaml +++ b/dts/Bindings/media/nxp,imx7-csi.yaml @@ -17,6 +17,7 @@ properties: compatible: oneOf: - enum: + - fsl,imx8mq-csi - fsl,imx7-csi - fsl,imx6ul-csi - items: diff --git a/dts/Bindings/media/nxp,imx8mq-mipi-csi2.yaml b/dts/Bindings/media/nxp,imx8mq-mipi-csi2.yaml index 1b3e1c4b99..2a14e3b0e0 100644 --- a/dts/Bindings/media/nxp,imx8mq-mipi-csi2.yaml +++ b/dts/Bindings/media/nxp,imx8mq-mipi-csi2.yaml @@ -58,11 +58,11 @@ properties: req_gpr is the gpr register offset of RX_ENABLE for the mipi phy. $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - - description: The 'gpr' is the phandle to general purpose register node. - - description: The 'req_gpr' is the gpr register offset containing - CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively. - maximum: 0xff + - items: + - description: The 'gpr' is the phandle to general purpose register node. + - description: The 'req_gpr' is the gpr register offset containing + CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively. + maximum: 0xff interconnects: maxItems: 1 diff --git a/dts/Bindings/media/nxp,imx8mq-vpu.yaml b/dts/Bindings/media/nxp,imx8mq-vpu.yaml index 762be3f96c..7dc13a4b18 100644 --- a/dts/Bindings/media/nxp,imx8mq-vpu.yaml +++ b/dts/Bindings/media/nxp,imx8mq-vpu.yaml @@ -5,7 +5,7 @@ $id: "http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: Hantro G1/G2 VPU codecs implemented on i.MX8MQ SoCs +title: Hantro G1/G2 VPU codecs implemented on i.MX8M SoCs maintainers: - Philipp Zabel <p.zabel@pengutronix.de> @@ -15,33 +15,21 @@ description: properties: compatible: - const: nxp,imx8mq-vpu + oneOf: + - const: nxp,imx8mq-vpu + deprecated: true + - const: nxp,imx8mq-vpu-g1 + - const: nxp,imx8mq-vpu-g2 + - const: nxp,imx8mm-vpu-g1 reg: - maxItems: 3 - - reg-names: - items: - - const: g1 - - const: g2 - - const: ctrl + maxItems: 1 interrupts: - maxItems: 2 - - interrupt-names: - items: - - const: g1 - - const: g2 + maxItems: 1 clocks: - maxItems: 3 - - clock-names: - items: - - const: g1 - - const: g2 - - const: bus + maxItems: 1 power-domains: maxItems: 1 @@ -49,31 +37,33 @@ properties: required: - compatible - reg - - reg-names - interrupts - - interrupt-names - clocks - - clock-names additionalProperties: false examples: - | #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/power/imx8mq-power.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + vpu_g1: video-codec@38300000 { + compatible = "nxp,imx8mq-vpu-g1"; + reg = <0x38300000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>; + power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>; + }; + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/power/imx8mq-power.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - vpu: video-codec@38300000 { - compatible = "nxp,imx8mq-vpu"; - reg = <0x38300000 0x10000>, - <0x38310000 0x10000>, - <0x38320000 0x10000>; - reg-names = "g1", "g2", "ctrl"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "g1", "g2"; - clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, - <&clk IMX8MQ_CLK_VPU_G2_ROOT>, - <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; - clock-names = "g1", "g2", "bus"; - power-domains = <&pgc_vpu>; + vpu_g2: video-codec@38300000 { + compatible = "nxp,imx8mq-vpu-g2"; + reg = <0x38310000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>; + power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>; }; diff --git a/dts/Bindings/media/qcom,msm8916-camss.yaml b/dts/Bindings/media/qcom,msm8916-camss.yaml index 304908072d..12ec3e1ea8 100644 --- a/dts/Bindings/media/qcom,msm8916-camss.yaml +++ b/dts/Bindings/media/qcom,msm8916-camss.yaml @@ -83,10 +83,6 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - items: - - const: 1 - data-lanes: description: An array of physical data lanes indexes. @@ -99,7 +95,6 @@ properties: maxItems: 4 required: - - clock-lanes - data-lanes port@1: @@ -114,16 +109,11 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - items: - - const: 1 - data-lanes: minItems: 1 maxItems: 4 required: - - clock-lanes - data-lanes reg: diff --git a/dts/Bindings/media/qcom,msm8996-camss.yaml b/dts/Bindings/media/qcom,msm8996-camss.yaml index 38be41e932..6aeb3d6d02 100644 --- a/dts/Bindings/media/qcom,msm8996-camss.yaml +++ b/dts/Bindings/media/qcom,msm8996-camss.yaml @@ -105,10 +105,6 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - items: - - const: 7 - data-lanes: description: An array of physical data lanes indexes. @@ -121,7 +117,6 @@ properties: maxItems: 4 required: - - clock-lanes - data-lanes port@1: @@ -136,16 +131,11 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - items: - - const: 7 - data-lanes: minItems: 1 maxItems: 4 required: - - clock-lanes - data-lanes port@2: @@ -160,16 +150,11 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - items: - - const: 7 - data-lanes: minItems: 1 maxItems: 4 required: - - clock-lanes - data-lanes port@3: @@ -184,16 +169,11 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - items: - - const: 7 - data-lanes: minItems: 1 maxItems: 4 required: - - clock-lanes - data-lanes reg: diff --git a/dts/Bindings/media/qcom,sdm660-camss.yaml b/dts/Bindings/media/qcom,sdm660-camss.yaml index 841a1aafdd..338ab28d5f 100644 --- a/dts/Bindings/media/qcom,sdm660-camss.yaml +++ b/dts/Bindings/media/qcom,sdm660-camss.yaml @@ -111,16 +111,11 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - items: - - const: 7 - data-lanes: minItems: 1 maxItems: 4 required: - - clock-lanes - data-lanes port@1: @@ -135,16 +130,11 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - items: - - const: 7 - data-lanes: minItems: 1 maxItems: 4 required: - - clock-lanes - data-lanes port@2: @@ -159,16 +149,11 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - items: - - const: 7 - data-lanes: minItems: 1 maxItems: 4 required: - - clock-lanes - data-lanes port@3: @@ -183,16 +168,11 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - items: - - const: 7 - data-lanes: minItems: 1 maxItems: 4 required: - - clock-lanes - data-lanes reg: diff --git a/dts/Bindings/media/qcom,sdm845-camss.yaml b/dts/Bindings/media/qcom,sdm845-camss.yaml index 9ca5dfa7f2..f9a003882f 100644 --- a/dts/Bindings/media/qcom,sdm845-camss.yaml +++ b/dts/Bindings/media/qcom,sdm845-camss.yaml @@ -105,15 +105,11 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - maxItems: 1 - data-lanes: minItems: 1 maxItems: 4 required: - - clock-lanes - data-lanes port@1: @@ -128,16 +124,11 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - items: - - const: 7 - data-lanes: minItems: 1 maxItems: 4 required: - - clock-lanes - data-lanes port@2: @@ -152,15 +143,11 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - maxItems: 1 - data-lanes: minItems: 1 maxItems: 4 required: - - clock-lanes - data-lanes port@3: @@ -175,15 +162,11 @@ properties: unevaluatedProperties: false properties: - clock-lanes: - maxItems: 1 - data-lanes: minItems: 1 maxItems: 4 required: - - clock-lanes - data-lanes reg: @@ -203,9 +186,13 @@ properties: - const: vfe1 - const: vfe_lite - vdda-supply: + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: description: - Definition of the regulator used as analog power supply. + Phandle to 1.8V regulator supply to PHY refclk pll block. required: - clock-names @@ -217,7 +204,8 @@ required: - power-domains - reg - reg-names - - vdda-supply + - vdda-phy-supply + - vdda-pll-supply additionalProperties: false @@ -361,7 +349,8 @@ examples: "vfe1", "vfe_lite"; - vdda-supply = <®_2v8>; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; ports { #address-cells = <1>; diff --git a/dts/Bindings/media/qcom,sm8250-camss.yaml b/dts/Bindings/media/qcom,sm8250-camss.yaml new file mode 100644 index 0000000000..07a2af12f3 --- /dev/null +++ b/dts/Bindings/media/qcom,sm8250-camss.yaml @@ -0,0 +1,463 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms. + +properties: + compatible: + const: qcom,sm8250-camss + + clocks: + minItems: 37 + maxItems: 37 + + clock-names: + items: + - const: cam_ahb_clk + - const: cam_hf_axi + - const: cam_sf_axi + - const: camnoc_axi + - const: camnoc_axi_src + - const: core_ahb + - const: cpas_ahb + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy3 + - const: csiphy3_timer + - const: csiphy4 + - const: csiphy4_timer + - const: csiphy5 + - const: csiphy5_timer + - const: slow_ahb_src + - const: vfe0_ahb + - const: vfe0_axi + - const: vfe0 + - const: vfe0_cphy_rx + - const: vfe0_csid + - const: vfe0_areg + - const: vfe1_ahb + - const: vfe1_axi + - const: vfe1 + - const: vfe1_cphy_rx + - const: vfe1_csid + - const: vfe1_areg + - const: vfe_lite_ahb + - const: vfe_lite_axi + - const: vfe_lite + - const: vfe_lite_cphy_rx + - const: vfe_lite_csid + + interrupts: + minItems: 14 + maxItems: 14 + + interrupt-names: + items: + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: csiphy4 + - const: csiphy5 + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid3 + - const: vfe0 + - const: vfe1 + - const: vfe_lite0 + - const: vfe_lite1 + + iommus: + minItems: 8 + maxItems: 8 + + interconnects: + minItems: 4 + maxItems: 4 + + interconnect-names: + items: + - const: cam_ahb + - const: cam_hf_0_mnoc + - const: cam_sf_0_mnoc + - const: cam_sf_icp_mnoc + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@4: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@5: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + reg: + minItems: 10 + maxItems: 10 + + reg-names: + items: + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: csiphy4 + - const: csiphy5 + - const: vfe0 + - const: vfe1 + - const: vfe_lite0 + - const: vfe_lite1 + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + +required: + - clock-names + - clocks + - compatible + - interconnects + - interconnect-names + - interrupts + - interrupt-names + - iommus + - power-domains + - reg + - reg-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,camcc-sm8250.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + camss: camss@ac6a000 { + compatible = "qcom,sm8250-camss"; + + reg = <0 0xac6a000 0 0x2000>, + <0 0xac6c000 0 0x2000>, + <0 0xac6e000 0 0x1000>, + <0 0xac70000 0 0x1000>, + <0 0xac72000 0 0x1000>, + <0 0xac74000 0 0x1000>, + <0 0xacb4000 0 0xd000>, + <0 0xacc3000 0 0xd000>, + <0 0xacd9000 0 0x2200>, + <0 0xacdb200 0 0x2200>; + reg-names = "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + + interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "csid0", + "csid1", + "csid2", + "csid3", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + power-domains = <&camcc IFE_0_GDSC>, + <&camcc IFE_1_GDSC>, + <&camcc TITAN_TOP_GDSC>; + + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>, + <&camcc CAM_CC_CORE_AHB_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY5_CLK>, + <&camcc CAM_CC_CSI5PHYTIMER_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_IFE_0_AHB_CLK>, + <&camcc CAM_CC_IFE_0_AXI_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_0_CSID_CLK>, + <&camcc CAM_CC_IFE_0_AREG_CLK>, + <&camcc CAM_CC_IFE_1_AHB_CLK>, + <&camcc CAM_CC_IFE_1_AXI_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_1_CSID_CLK>, + <&camcc CAM_CC_IFE_1_AREG_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_AXI_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + clock-names = "cam_ahb_clk", + "cam_hf_axi", + "cam_sf_axi", + "camnoc_axi", + "camnoc_axi_src", + "core_ahb", + "cpas_ahb", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "csiphy5", + "csiphy5_timer", + "slow_ahb_src", + "vfe0_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_csid", + "vfe0_areg", + "vfe1_ahb", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_csid", + "vfe1_areg", + "vfe_lite_ahb", + "vfe_lite_axi", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + + iommus = <&apps_smmu 0x800 0x400>, + <&apps_smmu 0x801 0x400>, + <&apps_smmu 0x840 0x400>, + <&apps_smmu 0x841 0x400>, + <&apps_smmu 0xC00 0x400>, + <&apps_smmu 0xC01 0x400>, + <&apps_smmu 0xC40 0x400>, + <&apps_smmu 0xC41 0x400>; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>, + <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "cam_ahb", + "cam_hf_0_mnoc", + "cam_sf_0_mnoc", + "cam_sf_icp_mnoc"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; diff --git a/dts/Bindings/media/renesas,csi2.yaml b/dts/Bindings/media/renesas,csi2.yaml index e6a0367210..b520d6c5c1 100644 --- a/dts/Bindings/media/renesas,csi2.yaml +++ b/dts/Bindings/media/renesas,csi2.yaml @@ -67,7 +67,10 @@ properties: maxItems: 1 data-lanes: - maxItems: 1 + minItems: 1 + maxItems: 4 + items: + maximum: 4 required: - clock-lanes diff --git a/dts/Bindings/media/ti,cal.yaml b/dts/Bindings/media/ti,cal.yaml index 66c5d392fa..7e078424ca 100644 --- a/dts/Bindings/media/ti,cal.yaml +++ b/dts/Bindings/media/ti,cal.yaml @@ -48,6 +48,10 @@ properties: ti,camerrx-control: $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + - items: + - description: phandle to device control module + - description: offset to the control_camerarx_core register description: phandle to the device control module and offset to the control_camerarx_core register |