summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/media
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2016-10-18 10:10:24 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2016-10-18 10:10:24 +0200
commitbfbf18d991756858337f7700e8ff0a6f0dc31afc (patch)
treecf3568de4fdff1891e277507f08f49a871682706 /dts/Bindings/media
parent834f6bf5e5f1169065376ad1aeb6a6266e66ce5c (diff)
downloadbarebox-bfbf18d991756858337f7700e8ff0a6f0dc31afc.tar.gz
dts: update to v4.9-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/media')
-rw-r--r--dts/Bindings/media/atmel-isc.txt65
-rw-r--r--dts/Bindings/media/exynos4-fimc-is.txt7
-rw-r--r--dts/Bindings/media/i2c/ad5820.txt19
-rw-r--r--dts/Bindings/media/i2c/adv7180.txt5
-rw-r--r--dts/Bindings/media/meson-ir.txt5
-rw-r--r--dts/Bindings/media/renesas,fcp.txt9
-rw-r--r--dts/Bindings/media/st,st-hva.txt24
-rw-r--r--dts/Bindings/media/stih-cec.txt25
8 files changed, 154 insertions, 5 deletions
diff --git a/dts/Bindings/media/atmel-isc.txt b/dts/Bindings/media/atmel-isc.txt
new file mode 100644
index 0000000..bbe0e87
--- /dev/null
+++ b/dts/Bindings/media/atmel-isc.txt
@@ -0,0 +1,65 @@
+Atmel Image Sensor Controller (ISC)
+----------------------------------------------
+
+Required properties for ISC:
+- compatible
+ Must be "atmel,sama5d2-isc".
+- reg
+ Physical base address and length of the registers set for the device.
+- interrupts
+ Should contain IRQ line for the ISC.
+- clocks
+ List of clock specifiers, corresponding to entries in
+ the clock-names property;
+ Please refer to clock-bindings.txt.
+- clock-names
+ Required elements: "hclock", "iscck", "gck".
+- #clock-cells
+ Should be 0.
+- clock-output-names
+ Should be "isc-mck".
+- pinctrl-names, pinctrl-0
+ Please refer to pinctrl-bindings.txt.
+
+ISC supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+isc: isc@f0008000 {
+ compatible = "atmel,sama5d2-isc";
+ reg = <0xf0008000 0x4000>;
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
+ clock-names = "hclock", "iscck", "gck";
+ #clock-cells = <0>;
+ clock-output-names = "isc-mck";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
+
+ port {
+ isc_0: endpoint {
+ remote-endpoint = <&ov7740_0>;
+ hsync-active = <1>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ };
+ };
+};
+
+i2c1: i2c@fc028000 {
+ ov7740: camera@21 {
+ compatible = "ovti,ov7740";
+ reg = <0x21>;
+ clocks = <&isc>;
+ clock-names = "xvclk";
+ assigned-clocks = <&isc>;
+ assigned-clock-rates = <24000000>;
+
+ port {
+ ov7740_0: endpoint {
+ remote-endpoint = <&isc_0>;
+ };
+ };
+ };
+};
diff --git a/dts/Bindings/media/exynos4-fimc-is.txt b/dts/Bindings/media/exynos4-fimc-is.txt
index 55c9ad6..32ced99 100644
--- a/dts/Bindings/media/exynos4-fimc-is.txt
+++ b/dts/Bindings/media/exynos4-fimc-is.txt
@@ -16,9 +16,10 @@ Required properties:
- clocks : list of clock specifiers, corresponding to entries in
clock-names property;
- clock-names : must contain "ppmuispx", "ppmuispx", "lite0", "lite1"
- "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "uart",
- "ispdiv0", "ispdiv1", "mcuispdiv0", "mcuispdiv1", "aclk200",
- "div_aclk200", "aclk400mcuisp", "div_aclk400mcuisp" entries,
+ "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "gicisp",
+ "pwm_isp", "mcuctl_isp", "uart", "ispdiv0", "ispdiv1",
+ "mcuispdiv0", "mcuispdiv1", "aclk200", "div_aclk200",
+ "aclk400mcuisp", "div_aclk400mcuisp" entries,
matching entries in the clocks property.
pmu subnode
-----------
diff --git a/dts/Bindings/media/i2c/ad5820.txt b/dts/Bindings/media/i2c/ad5820.txt
new file mode 100644
index 0000000..5940ca1
--- /dev/null
+++ b/dts/Bindings/media/i2c/ad5820.txt
@@ -0,0 +1,19 @@
+* Analog Devices AD5820 autofocus coil
+
+Required Properties:
+
+ - compatible: Must contain "adi,ad5820"
+
+ - reg: I2C slave address
+
+ - VANA-supply: supply of voltage for VANA pin
+
+Example:
+
+ ad5820: coil@c {
+ compatible = "adi,ad5820";
+ reg = <0x0c>;
+
+ VANA-supply = <&vaux4>;
+ };
+
diff --git a/dts/Bindings/media/i2c/adv7180.txt b/dts/Bindings/media/i2c/adv7180.txt
index 0d50115..4da486f 100644
--- a/dts/Bindings/media/i2c/adv7180.txt
+++ b/dts/Bindings/media/i2c/adv7180.txt
@@ -15,6 +15,11 @@ Required Properties :
"adi,adv7282"
"adi,adv7282-m"
+Optional Properties :
+- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
+ if any.
+
+
Example:
i2c0@1c22000 {
diff --git a/dts/Bindings/media/meson-ir.txt b/dts/Bindings/media/meson-ir.txt
index 407848e..e7e3f3c 100644
--- a/dts/Bindings/media/meson-ir.txt
+++ b/dts/Bindings/media/meson-ir.txt
@@ -1,7 +1,10 @@
* Amlogic Meson IR remote control receiver
Required properties:
- - compatible : should be "amlogic,meson6-ir"
+ - compatible : depending on the platform this should be one of:
+ - "amlogic,meson6-ir"
+ - "amlogic,meson8b-ir"
+ - "amlogic,meson-gxbb-ir"
- reg : physical base address and length of the device registers
- interrupts : a single specifier for the interrupt from the device
diff --git a/dts/Bindings/media/renesas,fcp.txt b/dts/Bindings/media/renesas,fcp.txt
index 6a12960..27f9b8e 100644
--- a/dts/Bindings/media/renesas,fcp.txt
+++ b/dts/Bindings/media/renesas,fcp.txt
@@ -7,12 +7,14 @@ conversion of AXI transactions in order to reduce the memory bandwidth.
There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and FCP
for FDP (FCPF). Their configuration and behaviour depend on the module they
-are paired with. These DT bindings currently support the FCPV only.
+are paired with. These DT bindings currently support the FCPV and FCPF.
- compatible: Must be one or more of the following
- "renesas,r8a7795-fcpv" for R8A7795 (R-Car H3) compatible 'FCP for VSP'
+ - "renesas,r8a7795-fcpf" for R8A7795 (R-Car H3) compatible 'FCP for FDP'
- "renesas,fcpv" for generic compatible 'FCP for VSP'
+ - "renesas,fcpf" for generic compatible 'FCP for FDP'
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first, followed by the
@@ -21,6 +23,10 @@ are paired with. These DT bindings currently support the FCPV only.
- reg: the register base and size for the device registers
- clocks: Reference to the functional clock
+Optional properties:
+ - power-domains : power-domain property defined with a power domain specifier
+ to respective power domain.
+
Device node example
-------------------
@@ -29,4 +35,5 @@ Device node example
compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
reg = <0 0xfea2f000 0 0x200>;
clocks = <&cpg CPG_MOD 602>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
};
diff --git a/dts/Bindings/media/st,st-hva.txt b/dts/Bindings/media/st,st-hva.txt
new file mode 100644
index 0000000..0d76174
--- /dev/null
+++ b/dts/Bindings/media/st,st-hva.txt
@@ -0,0 +1,24 @@
+st-hva: multi-format video encoder for STMicroelectronics SoC.
+
+Required properties:
+- compatible: should be "st,st-hva".
+- reg: HVA physical address location and length, esram address location and
+ length.
+- reg-names: names of the registers listed in registers property in the same
+ order.
+- interrupts: HVA interrupt number.
+- clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend on the SoC type.
+ See ../clock/clock-bindings.txt for details.
+- clock-names: names of the clocks listed in clocks property in the same order.
+
+Example:
+ hva@8c85000{
+ compatible = "st,st-hva";
+ reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
+ reg-names = "hva_registers", "hva_esram";
+ interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
+ <GIC_SPI 59 IRQ_TYPE_NONE>;
+ clock-names = "clk_hva";
+ clocks = <&clk_s_c0_flexgen CLK_HVA>;
+ };
diff --git a/dts/Bindings/media/stih-cec.txt b/dts/Bindings/media/stih-cec.txt
new file mode 100644
index 0000000..71c4b2f
--- /dev/null
+++ b/dts/Bindings/media/stih-cec.txt
@@ -0,0 +1,25 @@
+STMicroelectronics STIH4xx HDMI CEC driver
+
+Required properties:
+ - compatible : value should be "st,stih-cec"
+ - reg : Physical base address of the IP registers and length of memory
+ mapped region.
+ - clocks : from common clock binding: handle to HDMI CEC clock
+ - interrupts : HDMI CEC interrupt number to the CPU.
+ - pinctrl-names: Contains only one value - "default"
+ - pinctrl-0: Specifies the pin control groups used for CEC hardware.
+ - resets: Reference to a reset controller
+
+Example for STIH407:
+
+sti-cec@094a087c {
+ compatible = "st,stih-cec";
+ reg = <0x94a087c 0x64>;
+ clocks = <&clk_sysin>;
+ clock-names = "cec-clk";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+ interrupt-names = "cec-irq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cec0_default>;
+ resets = <&softreset STIH407_LPM_SOFTRESET>;
+};