dts: update to v5.8-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 352 insertions, 0 deletions

diff --git a/dts/Bindings/mfd/cirrus,lochnagar.yaml b/dts/Bindings/mfd/cirrus,lochnagar.yaml
new file mode 100644
index 0000000000..7a616577ac
--- /dev/null
+++ b/dts/Bindings/mfd/cirrus,lochnagar.yaml
@@ -0,0 +1,352 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of
+  various application processor systems to provide a full evaluation
+  platform.  Audio system topology, clocking and power can all be
+  controlled through the Lochnagar, allowing the device under test
+  to be used in a variety of possible use cases.
+
+  Also see these documents for generic binding information:
+    [1] GPIO : ../gpio/gpio.txt
+
+  And these for relevant defines:
+    [2] include/dt-bindings/pinctrl/lochnagar.h
+    [3] include/dt-bindings/clock/lochnagar.h
+
+  And these documents for the required sub-node binding details:
+    [4] Clock: ../clock/cirrus,lochnagar.yaml
+    [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml
+    [6] Sound: ../sound/cirrus,lochnagar.yaml
+    [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - cirrus,lochnagar2
+    then:
+      properties:
+        lochnagar-hwmon:
+          type: object
+          $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
+
+        lochnagar-sc:
+          type: object
+          $ref: /schemas/sound/cirrus,lochnagar.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar1
+      - cirrus,lochnagar2
+
+  reg:
+    const: 0x22
+
+  reset-gpios:
+    maxItems: 1
+
+  present-gpios:
+    description: |
+      Host present line, indicating the presence of a
+      host system, see [1]. This can be omitted if the present line is
+      tied in hardware.
+    maxItems: 1
+
+  lochnagar-clk:
+    type: object
+    $ref: /schemas/clock/cirrus,lochnagar.yaml#
+
+  lochnagar-pmic32k:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 32768
+
+  lochnagar-clk12m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 12288000
+
+  lochnagar-clk11m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 11298600
+
+  lochnagar-clk24m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 24576000
+
+  lochnagar-clk22m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 22579200
+
+  lochnagar-clk8m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 8192000
+
+  lochnagar-usb24m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 24576000
+
+  lochnagar-usb12m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 12288000
+
+  lochnagar-pinctrl:
+    type: object
+    $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
+
+  VDDCORE:
+    description:
+      Initialisation data for the VDDCORE regulator, which supplies the
+      CODECs digital core if not being provided by an internal regulator.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-vddcore
+
+      SYSVDD-supply:
+        description:
+          Primary power supply for the Lochnagar.
+    required:
+      - compatible
+
+  MICVDD:
+    description:
+      Initialisation data for the MICVDD regulator, which supplies the
+      CODECs MICVDD.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-micvdd
+
+      SYSVDD-supply:
+        description:
+          Primary power supply for the Lochnagar.
+    required:
+      - compatible
+
+  MIC1VDD:
+    description:
+      Initialisation data for the MIC1VDD supplies.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-mic1vdd
+
+      cirrus,micbias-input:
+        description:
+          A property selecting which of the CODEC minicard micbias outputs
+          should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 4
+
+      MICBIAS1-supply:
+        description:
+          Regulator supplies for the MIC1VDD outputs, supplying the digital
+          microphones, normally supplied from the attached CODEC.
+    required:
+      - compatible
+
+  MIC2VDD:
+    description:
+      Initialisation data for the MIC2VDD supplies.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-mic2vdd
+
+      cirrus,micbias-input:
+        description:
+          A property selecting which of the CODEC minicard micbias outputs
+          should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 4
+
+      MICBIAS2-supply:
+        description:
+          Regulator supplies for the MIC2VDD outputs, supplying the digital
+          microphones, normally supplied from the attached CODEC.
+    required:
+      - compatible
+
+  VDD1V8:
+    description:
+      Recommended fixed regulator for the VDD1V8 regulator, which supplies
+      the CODECs analog and 1.8V digital supplies.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        enum:
+          - regulator-fixed
+
+      regulator-min-microvolt:
+        const: 1800000
+
+      regulator-max-microvolt:
+        const: 1800000
+
+      vin-supply:
+        description:
+          Should be set to same supply as SYSVDD
+    required:
+      - compatible
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+      - regulator-boot-on
+      - regulator-always-on
+      - vin-supply
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - lochnagar-clk
+  - lochnagar-pinctrl
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clk/lochnagar.h>
+    #include <dt-bindings/pinctrl/lochnagar.h>
+    i2c@e0004000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0004000 0x1000>;
+
+        lochnagar: lochnagar@22 {
+            compatible = "cirrus,lochnagar2";
+            reg = <0x22>;
+
+            reset-gpios = <&gpio0 55 0>;
+            present-gpios = <&gpio0 60 0>;
+
+            lochnagarclk: lochnagar-clk {
+                compatible = "cirrus,lochnagar2-clk";
+
+                #clock-cells = <1>;
+                clocks = <&clkaudio>, <&clkpmic>;
+                clock-names = "ln-gf-mclk2", "ln-pmic-32k";
+
+                assigned-clocks = <&lochnagarclk LOCHNAGAR_CDC_MCLK1>,
+                                  <&lochnagarclk LOCHNAGAR_CDC_MCLK2>;
+                assigned-clock-parents = <&clkaudio>, <&clkpmic>;
+            };
+
+            clkpmic: lochnagar-pmic32k {
+                compatible = "fixed-clock";
+                #clock-cells = <0>;
+                clock-frequency = <32768>;
+            };
+
+            lochnagar-pinctrl {
+                compatible = "cirrus,lochnagar-pinctrl";
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinsettings>;
+
+                pinsettings: pin-settings {
+                    ap2aif-pins {
+                        input-enable;
+                        groups = "gf-aif1";
+                        function = "codec-aif3";
+                    };
+                    codec2aif-pins {
+                        output-enable;
+                        groups = "codec-aif3";
+                        function = "gf-aif1";
+                    };
+                };
+            };
+
+            lochnagar-sc {
+                compatible = "cirrus,lochnagar2-soundcard";
+
+                #sound-dai-cells = <1>;
+
+                clocks = <&lochnagarclk LOCHNAGAR_SOUNDCARD_MCLK>;
+                clock-names = "mclk";
+            };
+
+            lochnagar-hwmon {
+                compatible = "cirrus,lochnagar2-hwmon";
+            };
+
+            MIC1VDD {
+                compatible = "cirrus,lochnagar2-mic1vdd";
+
+                cirrus,micbias-input = <3>;
+            };
+
+            MICVDD {
+                compatible = "cirrus,lochnagar2-micvdd";
+
+                SYSVDD-supply = <&wallvdd>;
+
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+            };
+
+            VDD1V8 {
+                compatible = "regulator-fixed";
+
+                regulator-name = "VDD1V8";
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <1800000>;
+                regulator-boot-on;
+                regulator-always-on;
+
+                vin-supply = <&wallvdd>;
+            };
+        };
+    };