Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 65 insertions, 0 deletions

diff --git a/dts/Bindings/mfd/cros-ec.txt b/dts/Bindings/mfd/cros-ec.txt
new file mode 100644
index 0000000000..8009c3d87f
--- /dev/null
+++ b/dts/Bindings/mfd/cros-ec.txt
@@ -0,0 +1,65 @@
+ChromeOS Embedded Controller
+
+Google's ChromeOS EC is a Cortex-M device which talks to the AP and
+implements various function such as keyboard and battery charging.
+
+The EC can be connect through various means (I2C, SPI, LPC) and the
+compatible string used depends on the interface. Each connection method has
+its own driver which connects to the top level interface-agnostic EC driver.
+Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to
+the top-level driver.
+
+Required properties (I2C):
+- compatible: "google,cros-ec-i2c"
+- reg: I2C slave address
+
+Required properties (SPI):
+- compatible: "google,cros-ec-spi"
+- reg: SPI chip select
+
+Optional properties (SPI):
+- google,cros-ec-spi-msg-delay: Some implementations of the EC require some
+  additional processing time in order to accept new transactions. If the delay
+  between transactions is not long enough the EC may not be able to respond
+  properly to subsequent transactions and cause them to hang. This property
+  specifies the delay, in usecs, introduced between transactions to account
+  for the time required by the EC to get back into a state in which new data
+  can be accepted.
+
+Required properties (LPC):
+- compatible: "google,cros-ec-lpc"
+- reg: List of (IO address, size) pairs defining the interface uses
+
+
+Example for I2C:
+
+i2c@12CA0000 {
+	cros-ec@1e {
+		reg = <0x1e>;
+		compatible = "google,cros-ec-i2c";
+		interrupts = <14 0>;
+		interrupt-parent = <&wakeup_eint>;
+		wakeup-source;
+	};
+
+
+Example for SPI:
+
+spi@131b0000 {
+	ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0x0>;
+		interrupts = <14 0>;
+		interrupt-parent = <&wakeup_eint>;
+		wakeup-source;
+		spi-max-frequency = <5000000>;
+		controller-data {
+		cs-gpio = <&gpf0 3 4 3 0>;
+		samsung,spi-cs;
+		samsung,spi-feedback-delay = <2>;
+		};
+	};
+};
+
+
+Example for LPC is not supplied as it is not yet implemented.