summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/mfd/s2mps11.txt
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2015-02-09 08:45:25 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2015-02-11 09:50:08 +0100
commitab001302c8e1718110bb8839c270d2caa817b214 (patch)
treef5ab4feb5242e548917c3536b8510080df9a4e8f /dts/Bindings/mfd/s2mps11.txt
parentc937ef5d34ede89ae382cfe6d98ba366859a65af (diff)
downloadbarebox-ab001302c8e1718110bb8839c270d2caa817b214.tar.gz
barebox-ab001302c8e1718110bb8839c270d2caa817b214.tar.xz
dts: update to v3.19-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/mfd/s2mps11.txt')
-rw-r--r--dts/Bindings/mfd/s2mps11.txt22
1 files changed, 12 insertions, 10 deletions
diff --git a/dts/Bindings/mfd/s2mps11.txt b/dts/Bindings/mfd/s2mps11.txt
index 0e4026a6c..57a045016 100644
--- a/dts/Bindings/mfd/s2mps11.txt
+++ b/dts/Bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@
-* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
+* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,8 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is
addressed by the host system using different I2C slave addresses.
Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
- or "samsung,s2mpu02-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
+ or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
@@ -17,8 +17,8 @@ Optional properties:
- interrupts: Interrupt specifiers for interrupt sources.
Optional nodes:
-- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz
- outputs, so to register these as clocks with common clock framework
+- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
+ KHz outputs, so to register these as clocks with common clock framework
instantiate a sub-node named "clocks". It uses the common clock binding
documented in :
[Documentation/devicetree/bindings/clock/clock-bindings.txt]
@@ -30,12 +30,12 @@ Optional nodes:
the clock which they consume.
Clock ID Devices
----------------------------------------------------------
- 32KhzAP 0 S2MPS11, S2MPS14, S5M8767
- 32KhzCP 1 S2MPS11, S5M8767
- 32KhzBT 2 S2MPS11, S2MPS14, S5M8767
+ 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767
+ 32KhzCP 1 S2MPS11, S2MPS13, S5M8767
+ 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767
- - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk",
- "samsung,s5m8767-clk"
+ - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
+ "samsung,s2mps14-clk", "samsung,s5m8767-clk"
- regulators: The regulators of s2mps11 that have to be instantiated should be
included in a sub-node named 'regulators'. Regulator nodes included in this
@@ -81,12 +81,14 @@ as per the datasheet of s2mps11.
- LDOn
- valid values for n are:
- S2MPS11: 1 to 38
+ - S2MPS13: 1 to 40
- S2MPS14: 1 to 25
- S2MPU02: 1 to 28
- Example: LDO1, LDO2, LDO28
- BUCKn
- valid values for n are:
- S2MPS11: 1 to 10
+ - S2MPS13: 1 to 10
- S2MPS14: 1 to 5
- S2MPU02: 1 to 7
- Example: BUCK1, BUCK2, BUCK9