dts: update to v4.15-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

13 files changed, 94 insertions, 47 deletions

diff --git a/dts/Bindings/mfd/arizona.txt b/dts/Bindings/mfd/arizona.txt
index b37bdde5cf..bdd017686e 100644
--- a/dts/Bindings/mfd/arizona.txt
+++ b/dts/Bindings/mfd/arizona.txt
@@ -65,45 +65,6 @@ Optional properties:
     a value that is out of range for a 16 bit register then the chip default
     will be used. If present exactly five values must be specified.
 
-  - wlf,inmode : A list of INn_MODE register values, where n is the number
-    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
-    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
-    If present, values must be specified less than or equal to the number of
-    input signals. If values less than the number of input signals, elements
-    that have not been specified are set to 0 by default. Entries are:
-    <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
-    <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
-  - wlf,out-mono : A list of boolean values indicating whether each output is
-    mono or stereo. Position within the list indicates the output affected
-    (eg. First entry in the list corresponds to output 1). A non-zero value
-    indicates a mono output. If present, the number of values should be less
-    than or equal to the number of outputs, if less values are supplied the
-    additional outputs will be treated as stereo.
-
-  - wlf,dmic-ref : DMIC reference voltage source for each input, can be
-    selected from either MICVDD or one of the MICBIAS's, defines
-    (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
-    present, the number of values should be less than or equal to the
-    number of inputs, unspecified inputs will use the chip default.
-
-  - wlf,max-channels-clocked : The maximum number of channels to be clocked on
-    each AIF, useful for I2S systems with multiple data lines being mastered.
-    Specify one cell for each AIF to be configured, specify zero for AIFs that
-    should be handled normally.
-    If present, number of cells must be less than or equal to the number of
-    AIFs. If less than the number of AIFs, for cells that have not been
-    specified the corresponding AIFs will be treated as default setting.
-
-  - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6).
-    See the datasheet for values.
-    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
-      wm8998, wm1814)
-
-  - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).
-    See the datasheet for values.
-    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
-    wm8998, wm1814)
-
   - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
     they are being externally supplied. As covered in
     Documentation/devicetree/bindings/regulator/regulator.txt
@@ -112,6 +73,7 @@ Optional properties:
 Also see child specific device properties:
   Regulator - ../regulator/arizona-regulator.txt
   Extcon    - ../extcon/extcon-arizona.txt
+  Sound     - ../sound/arizona.txt
 
 Example:
 
diff --git a/dts/Bindings/mfd/aspeed-scu.txt b/dts/Bindings/mfd/aspeed-scu.txt
index 4fc5b83726..ce8cf0ec62 100644
--- a/dts/Bindings/mfd/aspeed-scu.txt
+++ b/dts/Bindings/mfd/aspeed-scu.txt
@@ -9,10 +9,16 @@ Required properties:
 		"aspeed,g5-scu", "syscon", "simple-mfd"
 
 - reg:		contains the offset and length of the SCU memory region
+- #clock-cells: should be set to <1> - the system controller is also a
+	clock provider
+- #reset-cells: should be set to <1> - the system controller is also a
+	reset line provider
 
 Example:
 
 syscon: syscon@1e6e2000 {
 	compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
 	reg = <0x1e6e2000 0x1a8>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
 };
diff --git a/dts/Bindings/mfd/brcm,iproc-cdru.txt b/dts/Bindings/mfd/brcm,iproc-cdru.txt
new file mode 100644
index 0000000000..82f82e0695
--- /dev/null
+++ b/dts/Bindings/mfd/brcm,iproc-cdru.txt
@@ -0,0 +1,16 @@
+Broadcom iProc Chip Device Resource Unit (CDRU)
+
+Various Broadcom iProc SoCs have a set of registers that provide various
+chip specific device and resource configurations. This node allows access to
+these CDRU registers via syscon.
+
+Required properties:
+- compatible: should contain:
+		"brcm,sr-cdru", "syscon" for Stingray
+- reg: base address and range of the CDRU registers
+
+Example:
+	cdru: syscon@6641d000 {
+		compatible = "brcm,sr-cdru", "syscon";
+		reg = <0 0x6641d000 0 0x400>;
+	};
diff --git a/dts/Bindings/mfd/brcm,iproc-mhb.txt b/dts/Bindings/mfd/brcm,iproc-mhb.txt
new file mode 100644
index 0000000000..4421e9771b
--- /dev/null
+++ b/dts/Bindings/mfd/brcm,iproc-mhb.txt
@@ -0,0 +1,18 @@
+Broadcom iProc Multi Host Bridge (MHB)
+
+Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls
+the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint
+interface; 3) access to the Nitro (network processing) engine
+
+This node allows access to these MHB registers via syscon.
+
+Required properties:
+- compatible: should contain:
+		"brcm,sr-mhb", "syscon" for Stingray
+- reg: base address and range of the MHB registers
+
+Example:
+	mhb: syscon@60401000 {
+		compatible = "brcm,sr-mhb", "syscon";
+		reg = <0 0x60401000 0 0x38c>;
+	};
diff --git a/dts/Bindings/mfd/max77686.txt b/dts/Bindings/mfd/max77686.txt
index 741e76688c..0f2587fa42 100644
--- a/dts/Bindings/mfd/max77686.txt
+++ b/dts/Bindings/mfd/max77686.txt
@@ -19,7 +19,7 @@ Required properties:
 
 Example:
 
-	max77686: pmic@09 {
+	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&wakeup_eint>;
 		interrupts = <26 0>;
diff --git a/dts/Bindings/mfd/max77693.txt b/dts/Bindings/mfd/max77693.txt
index 6a1ae3a2b7..e6754974a7 100644
--- a/dts/Bindings/mfd/max77693.txt
+++ b/dts/Bindings/mfd/max77693.txt
@@ -127,6 +127,12 @@ Required properties for the LED child node:
 Optional properties for the LED child node:
 - label : see Documentation/devicetree/bindings/leds/common.txt
 
+Optional nodes:
+- max77693-muic :
+	Node used only by extcon consumers.
+	Required properties:
+		- compatible : "maxim,max77693-muic"
+
 Example:
 #include <dt-bindings/leds/common.h>
 
diff --git a/dts/Bindings/mfd/max77802.txt b/dts/Bindings/mfd/max77802.txt
index 51fc1a60ca..f2f3fe7590 100644
--- a/dts/Bindings/mfd/max77802.txt
+++ b/dts/Bindings/mfd/max77802.txt
@@ -18,7 +18,7 @@ Required properties:
 
 Example:
 
-	max77802: pmic@09 {
+	max77802: pmic@9 {
 		compatible = "maxim,max77802";
 		interrupt-parent = <&intc>;
 		interrupts = <26 IRQ_TYPE_NONE>;
diff --git a/dts/Bindings/mfd/mc13xxx.txt b/dts/Bindings/mfd/mc13xxx.txt
index 39ba414676..ac235fe385 100644
--- a/dts/Bindings/mfd/mc13xxx.txt
+++ b/dts/Bindings/mfd/mc13xxx.txt
@@ -113,7 +113,6 @@ MC13892 regulators:
 Examples:
 
 ecspi@70010000 { /* ECSPI1 */
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
 		   <&gpio4 25 0>; /* GPIO4_25 */
 
diff --git a/dts/Bindings/mfd/mfd.txt b/dts/Bindings/mfd/mfd.txt
index bcb6abb9d4..336c0495c8 100644
--- a/dts/Bindings/mfd/mfd.txt
+++ b/dts/Bindings/mfd/mfd.txt
@@ -41,7 +41,7 @@ foo@1000 {
 	compatible = "syscon", "simple-mfd";
 	reg = <0x01000 0x1000>;
 
-	led@08.0 {
+	led@8.0 {
 		compatible = "register-bit-led";
 		offset = <0x08>;
 		mask = <0x01>;
diff --git a/dts/Bindings/mfd/sprd,sc27xx-pmic.txt b/dts/Bindings/mfd/sprd,sc27xx-pmic.txt
new file mode 100644
index 0000000000..21b9a897fc
--- /dev/null
+++ b/dts/Bindings/mfd/sprd,sc27xx-pmic.txt
@@ -0,0 +1,40 @@
+Spreadtrum SC27xx Power Management Integrated Circuit (PMIC)
+
+The Spreadtrum SC27xx series PMICs contain SC2720, SC2721, SC2723, SC2730
+and SC2731. The Spreadtrum PMIC belonging to SC27xx series integrates all
+mobile handset power management, audio codec, battery management and user
+interface support function in a single chip. It has 6 major functional
+blocks:
+- DCDCs to support CPU, memory.
+- LDOs to support both internal and external requirement.
+- Battery management system, such as charger, fuel gauge.
+- Audio codec.
+- User interface function, such as indicator, flash LED and so on.
+- IC level interface, such as power on/off control, RTC and typec and so on.
+
+Required properties:
+- compatible: Should be one of the following:
+	"sprd,sc2720"
+	"sprd,sc2721"
+	"sprd,sc2723"
+	"sprd,sc2730"
+	"sprd,sc2731"
+- reg: The address of the device chip select, should be 0.
+- spi-max-frequency: Typically set to 26000000.
+- interrupts: The interrupt line the device is connected to.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: The number of cells to describe an PMIC IRQ, must be 2.
+- #address-cells: Child device offset number of cells, must be 1.
+- #size-cells: Child device size number of cells, must be 0.
+
+Example:
+pmic@0 {
+	compatible = "sprd,sc2731";
+	reg = <0>;
+	spi-max-frequency = <26000000>;
+	interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
diff --git a/dts/Bindings/mfd/sun4i-gpadc.txt b/dts/Bindings/mfd/sun4i-gpadc.txt
index badff3611a..86dd8191b0 100644
--- a/dts/Bindings/mfd/sun4i-gpadc.txt
+++ b/dts/Bindings/mfd/sun4i-gpadc.txt
@@ -10,7 +10,7 @@ Required properties:
   - #io-channel-cells: shall be 0,
 
 Example:
-	ths: ths@01c25000 {
+	ths: ths@1c25000 {
 		compatible = "allwinner,sun8i-a33-ths";
 		reg = <0x01c25000 0x100>;
 		#thermal-sensor-cells = <0>;
@@ -47,7 +47,7 @@ Optional properties:
 
 Example:
 
-	rtp: rtp@01c25000 {
+	rtp: rtp@1c25000 {
 		compatible = "allwinner,sun4i-a10-ts";
 		reg = <0x01c25000 0x100>;
 		interrupts = <29>;
diff --git a/dts/Bindings/mfd/sun6i-prcm.txt b/dts/Bindings/mfd/sun6i-prcm.txt
index 03c5a551da..dd2c065404 100644
--- a/dts/Bindings/mfd/sun6i-prcm.txt
+++ b/dts/Bindings/mfd/sun6i-prcm.txt
@@ -15,7 +15,7 @@ The prcm node may contain several subdevices definitions:
 
 Example:
 
-	prcm: prcm@01f01400 {
+	prcm: prcm@1f01400 {
 		compatible = "allwinner,sun6i-a31-prcm";
 		reg = <0x01f01400 0x200>;
 
diff --git a/dts/Bindings/mfd/syscon.txt b/dts/Bindings/mfd/syscon.txt
index 408f768686..8b92d4576c 100644
--- a/dts/Bindings/mfd/syscon.txt
+++ b/dts/Bindings/mfd/syscon.txt
@@ -18,7 +18,7 @@ Optional property:
   performed on the device.
 
 Examples:
-gpr: iomuxc-gpr@020e0000 {
+gpr: iomuxc-gpr@20e0000 {
 	compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
 	reg = <0x020e0000 0x38>;
 };