summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/mfd
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2014-09-01 09:47:17 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2014-09-02 11:01:29 +0200
commita595ff6eea05b919567f96d71e7e2c7b6236b8ac (patch)
tree2d7cea529b6a06be744116e29e8a97b0c8de1981 /dts/Bindings/mfd
parent7955f4315187665690f51e20698d4c12c68e008f (diff)
downloadbarebox-a595ff6eea05b919567f96d71e7e2c7b6236b8ac.tar.gz
dts: update to v3.17-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/mfd')
-rw-r--r--dts/Bindings/mfd/arizona.txt10
-rw-r--r--dts/Bindings/mfd/as3722.txt8
-rw-r--r--dts/Bindings/mfd/palmas.txt2
-rw-r--r--dts/Bindings/mfd/s2mps11.txt11
-rw-r--r--dts/Bindings/mfd/sun6i-prcm.txt2
5 files changed, 28 insertions, 5 deletions
diff --git a/dts/Bindings/mfd/arizona.txt b/dts/Bindings/mfd/arizona.txt
index 36a0c3d..5c7e723 100644
--- a/dts/Bindings/mfd/arizona.txt
+++ b/dts/Bindings/mfd/arizona.txt
@@ -42,6 +42,16 @@ Optional properties:
the chip default will be used. If present exactly five values must
be specified.
+ - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
+ they are being externally supplied. As covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional subnodes:
+ - ldo1 : Initial data for the LDO1 regulator, as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+ - micvdd : Initial data for the MICVDD regulator, as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
Example:
codec: wm5102@1a {
diff --git a/dts/Bindings/mfd/as3722.txt b/dts/Bindings/mfd/as3722.txt
index 8edcb9b..4f64b2a 100644
--- a/dts/Bindings/mfd/as3722.txt
+++ b/dts/Bindings/mfd/as3722.txt
@@ -13,6 +13,14 @@ Required properties:
The second cell is the flags, encoded as the trigger masks from binding document
interrupts.txt, using dt-bindings/irq.
+Optional properties:
+--------------------
+- ams,enable-internal-int-pullup: Boolean property, to enable internal pullup on
+ interrupt pin. Missing this will disable internal pullup on INT pin.
+- ams,enable-internal-i2c-pullup: Boolean property, to enable internal pullup on
+ i2c scl/sda pins. Missing this will disable internal pullup on i2c
+ scl/sda lines.
+
Optional submodule and their properties:
=======================================
diff --git a/dts/Bindings/mfd/palmas.txt b/dts/Bindings/mfd/palmas.txt
index e5f0f83..eda8989 100644
--- a/dts/Bindings/mfd/palmas.txt
+++ b/dts/Bindings/mfd/palmas.txt
@@ -6,6 +6,7 @@ twl6037 (palmas)
tps65913 (palmas)
tps65914 (palmas)
tps659038
+tps65917
Required properties:
- compatible : Should be from the list
@@ -16,6 +17,7 @@ Required properties:
ti,tps65914
ti,tps80036
ti,tps659038
+ ti,tps65917
and also the generic series names
ti,palmas
- interrupt-controller : palmas has its own internal IRQs
diff --git a/dts/Bindings/mfd/s2mps11.txt b/dts/Bindings/mfd/s2mps11.txt
index d81ba30..ba2d7f0 100644
--- a/dts/Bindings/mfd/s2mps11.txt
+++ b/dts/Bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@
-* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator
+* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,7 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is
addressed by the host system using different I2C slave addresses.
Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
+ or "samsung,s2mpu02-pmic".
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
@@ -81,11 +82,13 @@ as per the datasheet of s2mps11.
- valid values for n are:
- S2MPS11: 1 to 38
- S2MPS14: 1 to 25
- - Example: LDO1, LD02, LDO28
+ - S2MPU02: 1 to 28
+ - Example: LDO1, LDO2, LDO28
- BUCKn
- valid values for n are:
- S2MPS11: 1 to 10
- S2MPS14: 1 to 5
+ - S2MPU02: 1 to 7
- Example: BUCK1, BUCK2, BUCK9
Example:
@@ -96,7 +99,7 @@ Example:
s2m_osc: clocks {
compatible = "samsung,s2mps11-clk";
- #clock-cells = 1;
+ #clock-cells = <1>;
clock-output-names = "xx", "yy", "zz";
};
diff --git a/dts/Bindings/mfd/sun6i-prcm.txt b/dts/Bindings/mfd/sun6i-prcm.txt
index 1f5a31f..03c5a55 100644
--- a/dts/Bindings/mfd/sun6i-prcm.txt
+++ b/dts/Bindings/mfd/sun6i-prcm.txt
@@ -4,7 +4,7 @@ PRCM is an MFD device exposing several Power Management related devices
(like clks and reset controllers).
Required properties:
- - compatible: "allwinner,sun6i-a31-prcm"
+ - compatible: "allwinner,sun6i-a31-prcm" or "allwinner,sun8i-a23-prcm"
- reg: The PRCM registers range
The prcm node may contain several subdevices definitions: