dts: update to v5.18-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

20 files changed, 1567 insertions, 743 deletions

diff --git a/dts/Bindings/mfd/ab8500.txt b/dts/Bindings/mfd/ab8500.txt
deleted file mode 100644
index 937b3e5505..0000000000
--- a/dts/Bindings/mfd/ab8500.txt
+++ /dev/null
@@ -1,282 +0,0 @@
-* AB8500 Multi-Functional Device (MFD)
-
-Required parent device properties:
-- compatible             : contains "stericsson,ab8500" or "stericsson,ab8505";
-- interrupts             : contains the IRQ line for the AB8500
-- interrupt-controller   : describes the AB8500 as an Interrupt Controller (has its own domain)
-- #interrupt-cells       : should be 2, for 2-cell format
-                            - The first cell is the AB8500 local IRQ number
-                            - The second cell is used to specify optional parameters
-                              - bits[3:0] trigger type and level flags:
-                                  1 = low-to-high edge triggered
-                                  2 = high-to-low edge triggered
-                                  4 = active high level-sensitive
-                                  8 = active low level-sensitive
-
-The AB8500 consists of a large and varied group of sub-devices:
-
-Device                     IRQ Names              Supply Names   Description
-------                     ---------              ------------   -----------
-ab8500-bm                :                      :              : Battery Manager
-ab8500-btemp             :                      :              : Battery Temperature
-ab8500-charger           :                      :              : Battery Charger
-ab8500-codec             :                      :              : Audio Codec
-ab8500-fg                : 			: vddadc       : Fuel Gauge
-			 : NCONV_ACCU           :	       : Accumulate N Sample Conversion
-			 : BATT_OVV		:	       : Battery Over Voltage
-			 : LOW_BAT_F		:	       : LOW threshold battery voltage
-			 : CC_INT_CALIB		:	       : Coulomb Counter Internal Calibration
-			 : CCEOC		:	       : Coulomb Counter End of Conversion
-ab8500-btemp		 :			: vtvout       : Battery Temperature
-			 : BAT_CTRL_INDB        :              : Battery Removal Indicator
-			 : BTEMP_LOW            :              : Btemp < BtempLow, if battery temperature is lower than -10°C
-			 : BTEMP_LOW_MEDIUM     :              : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
-			 : BTEMP_MEDIUM_HIGH    :	       : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and MaxTemp
-			 : BTEMP_HIGH           :              : Btemp > BtempHigh, if battery temperature is higher than MaxTemp
-ab8500-charger		 :			: vddadc       : Charger interface
-			 : MAIN_CH_UNPLUG_DET	:	       : main charger unplug detection management (not in 8505)
-			 : MAIN_CHARGE_PLUG_DET	:	       : main charger plug detection management (not in 8505)
-			 : MAIN_EXT_CH_NOT_OK	:	       : main charger not OK
-			 : MAIN_CH_TH_PROT_R	:	       : Die temp is above main charger
-			 : MAIN_CH_TH_PROT_F	:	       : Die temp is below main charger
-			 : VBUS_DET_F		:	       : VBUS falling detected
-			 : VBUS_DET_R		:	       : VBUS rising detected
-			 : USB_LINK_STATUS	:	       : USB link status has changed
-			 : USB_CH_TH_PROT_R	:	       : Die temp is above usb charger
-			 : USB_CH_TH_PROT_F	:	       : Die temp is below usb charger
-			 : USB_CHARGER_NOT_OKR	:	       : allowed USB charger not ok detection
-			 : VBUS_OVV		:	       : Overvoltage on Vbus ball detected (USB charge is stopped)
-			 : CH_WD_EXP		:	       : Charger watchdog detected
-ab8500-gpadc             : HW_CONV_END          : vddadc       : Analogue to Digital Converter
-                           SW_CONV_END          :              :
-ab8500-gpio              :                      :              : GPIO Controller (AB8500)
-ab8505-gpio              :                      :              : GPIO Controller (AB8505)
-ab8500-ponkey            : ONKEY_DBF            :              : Power-on Key
-                           ONKEY_DBR            :              :
-ab8500-pwm               :                      :              : Pulse Width Modulator
-ab8500-regulator         :                      :              : Regulators (AB8500)
-ab8505-regulator         :                      :              : Regulators (AB8505)
-ab8500-rtc               : 60S                  :              : Real Time Clock
-                         : ALARM                :              :
-ab8500-sysctrl           :                      :              : System Control
-ab8500-usb               : ID_WAKEUP_R          : vddulpivio18 : Universal Serial Bus
-                         : ID_WAKEUP_F          : v-ape        :
-                         : VBUS_DET_F           : musb_1v8     :
-                         : VBUS_DET_R           :              :
-                         : USB_LINK_STATUS      :              :
-                         : USB_ADP_PROBE_PLUG   :              :
-                         : USB_ADP_PROBE_UNPLUG :              :
-
-Required child device properties:
-- compatible             : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey|
-                                               pwm|regulator|rtc|sysctrl|usb]";
-
-  A few child devices require ADC channels from the GPADC node. Those follow the
-  standard bindings from
-  https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
-  and Documentation/devicetree/bindings/iio/adc/adc.yaml
-
-  abx500-temp		 : io-channels "aux1" and "aux2" for measuring external
-			   temperatures.
-  ab8500-fg		 : io-channel "main_bat_v" for measuring main battery voltage,
-  ab8500-btemp		 : io-channels "btemp_ball" and "bat_ctrl" for measuring the
-			   battery voltage.
-  ab8500-charger	 : io-channels "main_charger_v", "main_charger_c", "vbus_v",
-			   "usb_charger_c" for measuring voltage and current of the
-			   different charging supplies.
-
-Optional child device properties:
-- interrupts             : contains the device IRQ(s) using the 2-cell format (see above)
-- interrupt-names        : contains names of IRQ resource in the order in which they were
-                           supplied in the interrupts property
-- <supply_name>-supply   : contains a phandle to the regulator supply node in Device Tree
-
-Non-standard child device properties:
- - Audio CODEC:
-   - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential)
-   - stericsson,amic1a-bias-vamic2          : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,amic1b-bias-vamic2          : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,amic2-bias-vamic1           : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,earpeice-cmv                : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
-
-ab8500 {
-         compatible = "stericsson,ab8500";
-         interrupts = <0 40 0x4>;
-         interrupt-controller;
-         #interrupt-cells = <2>;
-
-         ab8500-rtc {
-                 compatible = "stericsson,ab8500-rtc";
-                 interrupts = <17 0x4
-                               18 0x4>;
-                 interrupt-names = "60S", "ALARM";
-         };
-
-        ab8500-gpadc {
-                compatible = "stericsson,ab8500-gpadc";
-                interrupts = <32 0x4
-                              39 0x4>;
-                interrupt-names = "HW_CONV_END", "SW_CONV_END";
-                vddadc-supply = <&ab8500_ldo_tvout_reg>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#io-channel-cells = <1>;
-
-		/* GPADC channels */
-		bat_ctrl: channel@1 {
-			reg = <0x01>;
-		};
-		btemp_ball: channel@2 {
-			reg = <0x02>;
-		};
-		main_charger_v: channel@3 {
-			reg = <0x03>;
-		};
-		acc_detect1: channel@4 {
-			reg = <0x04>;
-		};
-		acc_detect2: channel@5 {
-			reg = <0x05>;
-		};
-		adc_aux1: channel@6 {
-			reg = <0x06>;
-		};
-		adc_aux2: channel@7 {
-			reg = <0x07>;
-		};
-		main_batt_v: channel@8 {
-			reg = <0x08>;
-		};
-		vbus_v: channel@9 {
-			reg = <0x09>;
-		};
-		main_charger_c: channel@a {
-			reg = <0x0a>;
-		};
-		usb_charger_c: channel@b {
-			reg = <0x0b>;
-		};
-		bk_bat_v: channel@c {
-			reg = <0x0c>;
-		};
-		die_temp: channel@d {
-			reg = <0x0d>;
-		};
-		usb_id: channel@e {
-			reg = <0x0e>;
-		};
-		xtal_temp: channel@12 {
-			reg = <0x12>;
-		};
-		vbat_true_meas: channel@13 {
-			reg = <0x13>;
-		};
-		bat_ctrl_and_ibat: channel@1c {
-			reg = <0x1c>;
-		};
-		vbat_meas_and_ibat: channel@1d {
-			reg = <0x1d>;
-		};
-		vbat_true_meas_and_ibat: channel@1e {
-			reg = <0x1e>;
-		};
-		bat_temp_and_ibat: channel@1f {
-			reg = <0x1f>;
-		};
-        };
-
-	ab8500_temp {
-		compatible = "stericsson,abx500-temp";
-		io-channels = <&gpadc 0x06>,
-			      <&gpadc 0x07>;
-		io-channel-name = "aux1", "aux2";
-	};
-
-	ab8500_battery: ab8500_battery {
-		stericsson,battery-type = "LIPO";
-		thermistor-on-batctrl;
-	};
-
-	ab8500_fg {
-		compatible = "stericsson,ab8500-fg";
-		battery	   = <&ab8500_battery>;
-		io-channels = <&gpadc 0x08>;
-		io-channel-name = "main_bat_v";
-	};
-
-	ab8500_btemp {
-		compatible = "stericsson,ab8500-btemp";
-		battery	   = <&ab8500_battery>;
-		io-channels = <&gpadc 0x02>,
-			      <&gpadc 0x01>;
-		io-channel-name = "btemp_ball",
-				"bat_ctrl";
-	};
-
-	ab8500_charger {
-		compatible	= "stericsson,ab8500-charger";
-		battery		= <&ab8500_battery>;
-		vddadc-supply	= <&ab8500_ldo_tvout_reg>;
-		io-channels = <&gpadc 0x03>,
-			      <&gpadc 0x0a>,
-			      <&gpadc 0x09>,
-			      <&gpadc 0x0b>;
-		io-channel-name = "main_charger_v",
-				"main_charger_c",
-				"vbus_v",
-				"usb_charger_c";
-	};
-
-        ab8500-usb {
-                compatible = "stericsson,ab8500-usb";
-                interrupts = < 90 0x4
-                               96 0x4
-                               14 0x4
-                               15 0x4
-                               79 0x4
-                               74 0x4
-                               75 0x4>;
-                interrupt-names = "ID_WAKEUP_R",
-                                  "ID_WAKEUP_F",
-                                  "VBUS_DET_F",
-                                  "VBUS_DET_R",
-                                  "USB_LINK_STATUS",
-                                  "USB_ADP_PROBE_PLUG",
-                                  "USB_ADP_PROBE_UNPLUG";
-                vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
-                v-ape-supply = <&db8500_vape_reg>;
-                musb_1v8-supply = <&db8500_vsmps2_reg>;
-        };
-
-        ab8500-ponkey {
-                compatible = "stericsson,ab8500-ponkey";
-                interrupts = <6 0x4
-                              7 0x4>;
-                interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
-        };
-
-        ab8500-sysctrl {
-                compatible = "stericsson,ab8500-sysctrl";
-        };
-
-        ab8500-pwm {
-                compatible = "stericsson,ab8500-pwm";
-        };
-
-	codec: ab8500-codec {
-		compatible = "stericsson,ab8500-codec";
-
-		stericsson,earpeice-cmv = <950>; /* Units in mV. */
-	};
-
-        ab8500-regulators {
-                compatible = "stericsson,ab8500-regulator";
-
-                ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-                        /*
-                         * See: Documentation/devicetree/bindings/regulator/regulator.txt
-                         * for more information on regulators
-                         */
-                };
-        };
-};
diff --git a/dts/Bindings/mfd/delta,tn48m-cpld.yaml b/dts/Bindings/mfd/delta,tn48m-cpld.yaml
new file mode 100644
index 0000000000..f6967c1f62
--- /dev/null
+++ b/dts/Bindings/mfd/delta,tn48m-cpld.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/delta,tn48m-cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Lattice CPLD onboard the TN48M switches is used for system
+  management.
+
+  It provides information about the hardware model, revision,
+  PSU status etc.
+
+  It is also being used as a GPIO expander and reset controller
+  for the switch MAC-s and other peripherals.
+
+properties:
+  compatible:
+    const: delta,tn48m-cpld
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^gpio(@[0-9a-f]+)?$":
+    $ref: ../gpio/delta,tn48m-gpio.yaml
+
+  "^reset-controller?$":
+    $ref: ../reset/delta,tn48m-reset.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpld@41 {
+            compatible = "delta,tn48m-cpld";
+            reg = <0x41>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@31 {
+                compatible = "delta,tn48m-gpo";
+                reg = <0x31>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@3a {
+                compatible = "delta,tn48m-gpi";
+                reg = <0x3a>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@40 {
+                compatible = "delta,tn48m-gpi";
+                reg = <0x40>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            reset-controller {
+              compatible = "delta,tn48m-reset";
+              #reset-cells = <1>;
+            };
+        };
+    };
diff --git a/dts/Bindings/mfd/google,cros-ec.yaml b/dts/Bindings/mfd/google,cros-ec.yaml
index d1f53bd449..afec0bd2f1 100644
--- a/dts/Bindings/mfd/google,cros-ec.yaml
+++ b/dts/Bindings/mfd/google,cros-ec.yaml
@@ -31,25 +31,21 @@ properties:
 
   controller-data:
     description:
-      SPI controller data, see bindings/spi/spi-samsung.txt
+      SPI controller data, see bindings/spi/samsung,spi-peripheral-props.yaml
     type: object
 
   google,cros-ec-spi-pre-delay:
     description:
       This property specifies the delay in usecs between the
       assertion of the CS and the first clock pulse.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
-      - minimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
 
   google,cros-ec-spi-msg-delay:
     description:
       This property specifies the delay in usecs between messages.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
-      - minimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
 
   google,has-vbc-nvram:
     description:
@@ -89,6 +85,10 @@ properties:
 
   ec-pwm:
     $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+    deprecated: true
+
+  pwm:
+    $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
 
   keyboard-controller:
     $ref: "/schemas/input/google,cros-ec-keyb.yaml#"
@@ -148,18 +148,21 @@ patternProperties:
 required:
   - compatible
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - google,cros-ec-i2c
-          - google,cros-ec-rpmsg
-then:
-  properties:
-    google,cros-ec-spi-pre-delay: false
-    google,cros-ec-spi-msg-delay: false
-    spi-max-frequency: false
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,cros-ec-i2c
+              - google,cros-ec-rpmsg
+    then:
+      properties:
+        google,cros-ec-spi-pre-delay: false
+        google,cros-ec-spi-msg-delay: false
+        spi-max-frequency: false
+    else:
+      $ref: /schemas/spi/spi-peripheral-props.yaml
 
 additionalProperties: false
 
@@ -200,7 +203,7 @@ examples:
             spi-max-frequency = <5000000>;
 
             proximity {
-                    compatible = "google,cros-ec-mkbp-proximity";
+                compatible = "google,cros-ec-mkbp-proximity";
             };
 
             cbas {
diff --git a/dts/Bindings/mfd/max14577.txt b/dts/Bindings/mfd/max14577.txt
deleted file mode 100644
index be11943a05..0000000000
--- a/dts/Bindings/mfd/max14577.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Maxim MAX14577/77836 Multi-Function Device
-
-MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
-Battery Charger and SFOUT LDO output for powering USB devices. It is
-interfaced to host controller using I2C.
-
-MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
-For the description of Fuel Gauge low SOC alert interrupt see:
-../power/supply/max17040_battery.txt
-
-
-Required properties:
-- compatible : Must be "maxim,max14577" or "maxim,max77836".
-- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
-- interrupts : IRQ line for the chip.
-
-
-Required nodes:
- - charger :
-	Node for configuring the charger driver.
-	Required properties:
-		- compatible : "maxim,max14577-charger"
-			or "maxim,max77836-charger"
-		- maxim,fast-charge-uamp : Current in uA for Fast Charge;
-			Valid values:
-			- for max14577: 90000 - 950000;
-			- for max77836: 45000 - 475000;
-		- maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
-			Valid values:
-			- for max14577: 50000 - 200000;
-			- for max77836: 5000 - 100000;
-		- maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
-			In an overvoltage condition, INT asserts and charging
-			stops. Valid values:
-			- 6000000, 6500000, 7000000, 7500000;
-		- maxim,constant-uvolt : Battery Constant Voltage in uV;
-			Valid values:
-			- 4000000 - 4280000 (step by 20000);
-			- 4350000;
-
-
-Optional nodes:
-- max14577-muic/max77836-muic :
-	Node used only by extcon consumers.
-	Required properties:
-		- compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
-
-- regulators :
-	Required properties:
-		- compatible : "maxim,max14577-regulator"
-			or "maxim,max77836-regulator"
-
-	May contain a sub-node per regulator from the list below. Each
-	sub-node should contain the constraints and initialization information
-	for that regulator. See regulator.txt for a description of standard
-	properties for these sub-nodes.
-
-	List of valid regulator names:
-	- for max14577: CHARGER, SAFEOUT.
-	- for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
-
-	The SAFEOUT is a fixed voltage regulator so there is no need to specify
-	voltages for it.
-
-
-Example:
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-max14577@25 {
-	compatible = "maxim,max14577";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-
-	muic: max14577-muic {
-		compatible = "maxim,max14577-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max14577-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max14577-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <450000>;
-		maxim,eoc-uamp = <50000>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
-
-
-max77836@25 {
-	compatible = "maxim,max77836";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-
-	muic: max77836-muic {
-		compatible = "maxim,max77836-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max77836-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-		LDO1 {
-			regulator-name = "LDO1";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-		LDO2 {
-			regulator-name = "LDO2";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3950000>;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max77836-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <225000>;
-		maxim,eoc-uamp = <7500>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
diff --git a/dts/Bindings/mfd/max77693.txt b/dts/Bindings/mfd/max77693.txt
deleted file mode 100644
index 1032df1449..0000000000
--- a/dts/Bindings/mfd/max77693.txt
+++ /dev/null
@@ -1,194 +0,0 @@
-Maxim MAX77693 multi-function device
-
-MAX77693 is a Multifunction device with the following submodules:
-- PMIC,
-- CHARGER,
-- LED,
-- MUIC,
-- HAPTIC
-
-It is interfaced to host controller using i2c.
-This document describes the bindings for the mfd device.
-
-Required properties:
-- compatible : Must be "maxim,max77693".
-- reg : Specifies the i2c slave address of PMIC block.
-- interrupts : This i2c device has an IRQ line connected to the main SoC.
-
-Optional properties:
-- regulators : The regulators of max77693 have to be instantiated under subnode
-  named "regulators" using the following format.
-
-	regulators {
-		regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER
-		standard regulator constraints[*].
-	};
-
-	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide
-  users with tactile feedback. PWM period and duty-cycle are varied in
-  order to provide the appropriate level of feedback.
-
- Required properties:
-	- compatible : Must be "maxim,max77693-haptic"
-	- haptic-supply : power supply for the haptic motor
-	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
-	- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
-	 PWM properties should be named "pwms". And number of cell is different
-	 for each pwm device.
-	 To get more information, please refer to documentation.
-	[*] refer Documentation/devicetree/bindings/pwm/pwm.txt
-
-- charger : Node configuring the charger driver.
-  If present, required properties:
-  - compatible : Must be "maxim,max77693-charger".
-
-  Optional properties (if not set, defaults will be used):
-  - maxim,constant-microvolt : Battery constant voltage in uV. The charger
-    will operate in fast charge constant current mode till battery voltage
-    reaches this level. Then the charger will switch to fast charge constant
-    voltage mode. Also vsys (system voltage) will be set to this value when
-    DC power is supplied but charger is not enabled.
-    Valid values: 3650000 - 4400000, step by 25000 (rounded down)
-    Default: 4200000
-
-  - maxim,min-system-microvolt : Minimal system voltage in uV.
-    Valid values: 3000000 - 3700000, step by 100000 (rounded down)
-    Default: 3600000
-
-  - maxim,thermal-regulation-celsius : Temperature in Celsius for entering
-    high temperature charging mode. If die temperature exceeds this value
-    the charging current will be reduced by 105 mA/Celsius.
-    Valid values: 70, 85, 100, 115
-    Default: 100
-
-  - maxim,battery-overcurrent-microamp : Overcurrent protection threshold
-    in uA (current from battery to system).
-    Valid values: 2000000 - 3500000, step by 250000 (rounded down)
-    Default: 3500000
-
-  - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for
-    triggering input voltage regulation loop. If input voltage decreases
-    below this value, the input current will be reduced to reach the
-    threshold voltage.
-    Valid values: 4300000, 4700000, 4800000, 4900000
-    Default: 4300000
-
-- led : the LED submodule device node
-
-There are two LED outputs available - FLED1 and FLED2. Each of them can
-control a separate LED or they can be connected together to double
-the maximum current for a single connected LED. One LED is represented
-by one child node.
-
-Required properties:
-- compatible : Must be "maxim,max77693-led".
-
-Optional properties:
-- maxim,boost-mode :
-	In boost mode the device can produce up to 1.2A of total current
-	on both outputs. The maximum current on each output is reduced
-	to 625mA then. If not enabled explicitly, boost setting defaults to
-	LEDS_BOOST_FIXED in case both current sources are used.
-	Possible values:
-		LEDS_BOOST_OFF (0) - no boost,
-		LEDS_BOOST_ADAPTIVE (1) - adaptive mode,
-		LEDS_BOOST_FIXED (2) - fixed mode.
-- maxim,boost-mvout : Output voltage of the boost module in millivolts.
-	Valid values: 3300 - 5500, step by 25 (rounded down)
-	Default: 3300
-- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired
-	if chip estimates that system voltage could drop below this level due
-	to flash power consumption.
-	Valid values: 2400 - 3400, step by 33 (rounded down)
-	Default: 2400
-
-Required properties for the LED child node:
-- led-sources : see Documentation/devicetree/bindings/leds/common.txt;
-		device current output identifiers: 0 - FLED1, 1 - FLED2
-- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-	Valid values for a LED connected to one FLED output:
-		15625 - 250000, step by 15625 (rounded down)
-	Valid values for a LED connected to both FLED outputs:
-		15625 - 500000, step by 15625 (rounded down)
-- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-	Valid values for a single LED connected to one FLED output
-	(boost mode must be turned off):
-		15625 - 1000000, step by 15625 (rounded down)
-	Valid values for a single LED connected to both FLED outputs:
-		15625 - 1250000, step by 15625 (rounded down)
-	Valid values for two LEDs case:
-		15625 - 625000, step by 15625 (rounded down)
-- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
-	Valid values: 62500 - 1000000, step by 62500 (rounded down)
-
-Optional properties for the LED child node:
-- label : see Documentation/devicetree/bindings/leds/common.txt
-
-Optional nodes:
-- max77693-muic :
-	Node used only by extcon consumers.
-	Required properties:
-		- compatible : "maxim,max77693-muic"
-
-Example:
-#include <dt-bindings/leds/common.h>
-
-	max77693@66 {
-		compatible = "maxim,max77693";
-		reg = <0x66>;
-		interrupt-parent = <&gpx1>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-
-		regulators {
-			esafeout@1 {
-				regulator-compatible = "ESAFEOUT1";
-				regulator-name = "ESAFEOUT1";
-				regulator-boot-on;
-			};
-			esafeout@2 {
-				regulator-compatible = "ESAFEOUT2";
-				regulator-name = "ESAFEOUT2";
-				};
-			charger@0 {
-				regulator-compatible = "CHARGER";
-				regulator-name = "CHARGER";
-				regulator-min-microamp = <60000>;
-				regulator-max-microamp = <2580000>;
-					regulator-boot-on;
-			};
-		};
-
-		haptic {
-			compatible = "maxim,max77693-haptic";
-			haptic-supply = <&haptic_supply>;
-			pwms = <&pwm 0 40000 0>;
-			pwm-names = "haptic";
-		};
-
-		charger {
-			compatible = "maxim,max77693-charger";
-
-			maxim,constant-microvolt = <4200000>;
-			maxim,min-system-microvolt = <3600000>;
-			maxim,thermal-regulation-celsius = <75>;
-			maxim,battery-overcurrent-microamp = <3000000>;
-			maxim,charge-input-threshold-microvolt = <4300000>;
-		};
-
-		led {
-			compatible = "maxim,max77693-led";
-			maxim,boost-mode = <LEDS_BOOST_FIXED>;
-			maxim,boost-mvout = <5000>;
-			maxim,mvsys-min = <2400>;
-
-			camera_flash: flash-led {
-				label = "max77693-flash";
-				led-sources = <0>, <1>;
-				led-max-microamp = <500000>;
-				flash-max-microamp = <1250000>;
-				flash-max-timeout-us = <1000000>;
-			};
-		};
-	};
diff --git a/dts/Bindings/mfd/max77802.txt b/dts/Bindings/mfd/max77802.txt
deleted file mode 100644
index 09decac20d..0000000000
--- a/dts/Bindings/mfd/max77802.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Maxim MAX77802 multi-function device
-
-The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high
-efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power
-up application processors and peripherals, a 2-channel 32kHz clock outputs,
-a Real-Time-Clock (RTC) and a I2C interface to program the individual
-regulators, clocks outputs and the RTC.
-
-Bindings for the built-in 32k clock generator block and
-regulators are defined in ../clk/maxim,max77802.txt and
-../regulator/max77802.txt respectively.
-
-Required properties:
-- compatible		: Must be "maxim,max77802"
-- reg			: Specifies the I2C slave address of PMIC block.
-- interrupts		: I2C device IRQ line connected to the main SoC.
-
-Example:
-
-	max77802: pmic@9 {
-		compatible = "maxim,max77802";
-		interrupt-parent = <&intc>;
-		interrupts = <26 IRQ_TYPE_NONE>;
-		reg = <0x09>;
-	};
diff --git a/dts/Bindings/mfd/maxim,max14577.yaml b/dts/Bindings/mfd/maxim,max14577.yaml
new file mode 100644
index 0000000000..27870b8760
--- /dev/null
+++ b/dts/Bindings/mfd/maxim,max14577.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout regulators, charger and MicroUSB management IC.
+
+  The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB
+  management IC.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577
+      - maxim,max77836
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  charger:
+    $ref: /schemas/power/supply/maxim,max14577.yaml
+
+  extcon:
+    type: object
+    properties:
+      compatible:
+        enum:
+          - maxim,max14577-muic
+          - maxim,max77836-muic
+
+    required:
+      - compatible
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max14577.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - charger
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577
+    then:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max14577-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max14577-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max14577-regulator
+    else:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max77836-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max77836-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max77836-regulator
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max14577";
+            reg = <0x25>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+            extcon {
+                compatible = "maxim,max14577-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max14577-regulator";
+
+                SAFEOUT {
+                    regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <90000>;
+                    regulator-max-microamp = <950000>;
+                    regulator-boot-on;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max14577-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <450000>;
+                maxim,eoc-uamp = <50000>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max77836";
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_NONE>;
+            reg = <0x25>;
+            wakeup-source;
+
+            extcon {
+                compatible = "maxim,max77836-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max77836-regulator";
+
+                SAFEOUT {
+                    regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <45000>;
+                    regulator-max-microamp = <475000>;
+                    regulator-boot-on;
+                };
+
+                LDO1 {
+                    regulator-name = "MOT_2.7V";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <2700000>;
+                };
+
+                LDO2 {
+                    regulator-name = "UNUSED_LDO2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3950000>;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max77836-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <225000>;
+                maxim,eoc-uamp = <7500>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
diff --git a/dts/Bindings/mfd/maxim,max77693.yaml b/dts/Bindings/mfd/maxim,max77693.yaml
new file mode 100644
index 0000000000..906101197e
--- /dev/null
+++ b/dts/Bindings/mfd/maxim,max77693.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which
+  includes voltage current regulators, charger, LED/flash, haptic motor driver
+  and MicroUSB management IC.
+
+properties:
+  compatible:
+    const: maxim,max77693
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  charger:
+    $ref: /schemas/power/supply/maxim,max77693.yaml
+
+  led:
+    $ref: /schemas/leds/maxim,max77693.yaml
+
+  max77693-muic:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: maxim,max77693-muic
+
+    required:
+      - compatible
+
+  motor-driver:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: maxim,max77693-haptic
+
+      haptic-supply:
+        description: Power supply to the haptic motor
+
+      pwms:
+        maxItems: 1
+
+    required:
+      - compatible
+      - haptic-supply
+      - pwms
+
+  regulators:
+    $ref: ../regulator/maxim,max77693.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max77693";
+            reg = <0x66>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                ESAFEOUT1 {
+                    regulator-name = "ESAFEOUT1";
+                };
+
+                ESAFEOUT2 {
+                    regulator-name = "ESAFEOUT2";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <60000>;
+                    regulator-max-microamp = <2580000>;
+                };
+            };
+
+            motor-driver {
+                compatible = "maxim,max77693-haptic";
+                haptic-supply = <&ldo26_reg>;
+                pwms = <&pwm 0 38022 0>;
+            };
+
+            charger {
+                compatible = "maxim,max77693-charger";
+
+                maxim,constant-microvolt = <4350000>;
+                maxim,min-system-microvolt = <3600000>;
+                maxim,thermal-regulation-celsius = <100>;
+                maxim,battery-overcurrent-microamp = <3500000>;
+                maxim,charge-input-threshold-microvolt = <4300000>;
+            };
+
+            led {
+                compatible = "maxim,max77693-led";
+                maxim,boost-mode = <LEDS_BOOST_FIXED>;
+                maxim,boost-mvout = <5000>;
+                maxim,mvsys-min = <2400>;
+
+                flash-led {
+                    label = "max77693-flash";
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    led-sources = <0>, <1>;
+                    led-max-microamp = <500000>;
+                    flash-max-microamp = <1250000>;
+                    flash-max-timeout-us = <1000000>;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/mfd/maxim,max77714.yaml b/dts/Bindings/mfd/maxim,max77714.yaml
new file mode 100644
index 0000000000..74a6867d3c
--- /dev/null
+++ b/dts/Bindings/mfd/maxim,max77714.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated.
+
+maintainers:
+  - Luca Ceresoli <luca@lucaceresoli.net>
+
+description: |
+  MAX77714 is a Power Management IC with 4 buck regulators, 9
+  low-dropout regulators, 8 GPIOs, RTC and watchdog.
+
+properties:
+  compatible:
+    const: maxim,max77714
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger type.
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(buck[0-3]|ldo[0-8])$':
+        type: object
+        unevaluatedProperties: false
+        $ref: /schemas/regulator/regulator.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@1c {
+            compatible = "maxim,max77714";
+            reg = <0x1c>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/dts/Bindings/mfd/maxim,max77802.yaml b/dts/Bindings/mfd/maxim,max77802.yaml
new file mode 100644
index 0000000000..baa1346ac5
--- /dev/null
+++ b/dts/Bindings/mfd/maxim,max77802.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77802 Power Management IC
+
+maintainers:
+  - Javier Martinez Canillas <javier@dowhile0.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77802 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77802 is a Power Management IC which includes voltage and
+  current regulators (10 high efficiency Buck regulators and 32 Low-DropOut
+  (LDO)), RTC and clock outputs.
+
+  The MAX77802 provides two 32.768khz clock outputs that can be controlled
+  (gated/ungated) over I2C.  The clock IDs are defined as preprocessor macros
+  in dt-bindings/clock/maxim,max77802.h.
+
+properties:
+  compatible:
+    const: maxim,max77802
+
+  '#clock-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max77802.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  inb1-supply:
+    description: Power supply for buck1
+  inb2-supply:
+    description: Power supply for buck2
+  inb3-supply:
+    description: Power supply for buck3
+  inb4-supply:
+    description: Power supply for buck4
+  inb5-supply:
+    description: Power supply for buck5
+  inb6-supply:
+    description: Power supply for buck6
+  inb7-supply:
+    description: Power supply for buck7
+  inb8-supply:
+    description: Power supply for buck8
+  inb9-supply:
+    description: Power supply for buck9
+  inb10-supply:
+    description: Power supply for buck10
+
+  inl1-supply:
+    description: Power supply for LDO8, LDO15
+  inl2-supply:
+    description: Power supply for LDO17, LDO27, LDO30, LDO35
+  inl3-supply:
+    description: Power supply for LDO3, LDO5, LDO7, LDO7
+  inl4-supply:
+    description: Power supply for LDO10, LDO11, LDO13, LDO14
+  inl5-supply:
+    description: Power supply for LDO9, LDO19
+  inl6-supply:
+    description: Power supply for LDO4, LDO21, LDO24, LDO33
+  inl7-supply:
+    description: Power supply for LDO18, LDO20, LDO28, LDO29
+  inl9-supply:
+    description: Power supply for LDO12, LDO23, LDO25, LDO26, LDO32, LDO34
+  inl10-supply:
+    description: Power supply for LDO1, LDO2
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/maxim,max77802.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@9 {
+            compatible = "maxim,max77802";
+            interrupt-parent = <&gpx3>;
+            interrupts = <1 IRQ_TYPE_NONE>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
+                        <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+            wakeup-source;
+            reg = <0x9>;
+            #clock-cells = <1>;
+
+            inb1-supply = <&tps65090_dcdc2>;
+            inb2-supply = <&tps65090_dcdc1>;
+            inb3-supply = <&tps65090_dcdc2>;
+            inb4-supply = <&tps65090_dcdc2>;
+            inb5-supply = <&tps65090_dcdc1>;
+            inb6-supply = <&tps65090_dcdc2>;
+            inb7-supply = <&tps65090_dcdc1>;
+            inb8-supply = <&tps65090_dcdc1>;
+            inb9-supply = <&tps65090_dcdc1>;
+            inb10-supply = <&tps65090_dcdc1>;
+
+            inl1-supply = <&buck5_reg>;
+            inl2-supply = <&buck7_reg>;
+            inl3-supply = <&buck9_reg>;
+            inl4-supply = <&buck9_reg>;
+            inl5-supply = <&buck9_reg>;
+            inl6-supply = <&tps65090_dcdc2>;
+            inl7-supply = <&buck9_reg>;
+            inl9-supply = <&tps65090_dcdc2>;
+            inl10-supply = <&buck7_reg>;
+
+            regulators {
+                BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <12500>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <12500>;
+                    regulator-coupled-with = <&buck3_reg>;
+                    regulator-coupled-max-spread = <300000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK10 {
+                    regulator-name = "vdd_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                LDO1 {
+                    regulator-name = "vdd_1v0";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                    regulator-initial-mode = <MAX77802_OPMODE_NORMAL>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-mode = <MAX77802_OPMODE_LP>;
+                    };
+                };
+
+                // ...
+
+                LDO35 {
+                    regulator-name = "ldo_35";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/mfd/maxim,max77843.yaml b/dts/Bindings/mfd/maxim,max77843.yaml
new file mode 100644
index 0000000000..61a0f9dcb9
--- /dev/null
+++ b/dts/Bindings/mfd/maxim,max77843.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX77843 is a MicroUSB and Companion Power Management IC which
+  includes voltage current regulators, charger, fuel-gauge, haptic motor driver
+  and MicroUSB management IC.
+
+properties:
+  compatible:
+    const: maxim,max77843
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  extcon:
+    $ref: /schemas/extcon/maxim,max77843.yaml
+
+  motor-driver:
+    type: object
+    properties:
+      compatible:
+        const: maxim,max77843-haptic
+
+      haptic-supply:
+        description: Power supply to the haptic motor
+
+      pwms:
+        maxItems: 1
+
+    required:
+      - compatible
+      - haptic-supply
+      - pwms
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max77843.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max77843";
+            interrupt-parent = <&gpa1>;
+            interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+            reg = <0x66>;
+
+            extcon {
+                compatible = "maxim,max77843-muic";
+
+                connector {
+                    compatible = "samsung,usb-connector-11pin",
+                                 "usb-b-connector";
+                    label = "micro-USB";
+                    type = "micro";
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            /*
+                             * TODO: The DTS this is based on does not have
+                             * port@0 which is a required property. The ports
+                             * look incomplete and need fixing.
+                             * Add a disabled port just to satisfy dtschema.
+                             */
+                            reg = <0>;
+                            status = "disabled";
+                        };
+
+                        port@3 {
+                            reg = <3>;
+                            endpoint {
+                                remote-endpoint = <&mhl_to_musb_con>;
+                            };
+                        };
+                    };
+                };
+
+                ports {
+                    port {
+                        endpoint {
+                            remote-endpoint = <&usb_to_muic>;
+                        };
+                    };
+                };
+            };
+
+            regulators {
+                compatible = "maxim,max77843-regulator";
+
+                SAFEOUT1 {
+                    regulator-name = "SAFEOUT1";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <4950000>;
+                };
+
+                SAFEOUT2 {
+                    regulator-name = "SAFEOUT2";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <4950000>;
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <100000>;
+                    regulator-max-microamp = <3150000>;
+                };
+            };
+
+            motor-driver {
+                compatible = "maxim,max77843-haptic";
+                haptic-supply = <&ldo38_reg>;
+                pwms = <&pwm 0 33670 0>;
+            };
+        };
+    };
diff --git a/dts/Bindings/mfd/mt6397.txt b/dts/Bindings/mfd/mt6397.txt
index 99a84b69a2..293db2a71e 100644
--- a/dts/Bindings/mfd/mt6397.txt
+++ b/dts/Bindings/mfd/mt6397.txt
@@ -20,7 +20,7 @@ This document describes the binding for MFD device and its sub module.
 Required properties:
 compatible:
 	"mediatek,mt6323" for PMIC MT6323
-	"mediatek,mt6358" for PMIC MT6358
+	"mediatek,mt6358" for PMIC MT6358 and MT6366
 	"mediatek,mt6359" for PMIC MT6359
 	"mediatek,mt6397" for PMIC MT6397
 
diff --git a/dts/Bindings/mfd/qcom,spmi-pmic.txt b/dts/Bindings/mfd/qcom,spmi-pmic.txt
index 7a27c500ff..a461ec2f75 100644
--- a/dts/Bindings/mfd/qcom,spmi-pmic.txt
+++ b/dts/Bindings/mfd/qcom,spmi-pmic.txt
@@ -35,6 +35,7 @@ Required properties:
                    "qcom,pm8916",
                    "qcom,pm8941",
                    "qcom,pm8950",
+                   "qcom,pm8953",
                    "qcom,pm8994",
                    "qcom,pm8998",
                    "qcom,pma8084",
diff --git a/dts/Bindings/mfd/qcom,tcsr.txt b/dts/Bindings/mfd/qcom,tcsr.txt
index c5f4f0ddfc..add61bcc3c 100644
--- a/dts/Bindings/mfd/qcom,tcsr.txt
+++ b/dts/Bindings/mfd/qcom,tcsr.txt
@@ -10,6 +10,7 @@ Required properties:
 		"qcom,tcsr-ipq8064", "syscon" for IPQ8064
 		"qcom,tcsr-apq8064", "syscon" for APQ8064
 		"qcom,tcsr-msm8660", "syscon" for MSM8660
+		"qcom,tcsr-msm8953", "syscon" for MSM8953
 		"qcom,tcsr-msm8960", "syscon" for MSM8960
 		"qcom,tcsr-msm8974", "syscon" for MSM8974
 		"qcom,tcsr-apq8084", "syscon" for APQ8084
diff --git a/dts/Bindings/mfd/samsung,exynos5433-lpass.txt b/dts/Bindings/mfd/samsung,exynos5433-lpass.txt
deleted file mode 100644
index 30ea27c393..0000000000
--- a/dts/Bindings/mfd/samsung,exynos5433-lpass.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Samsung Exynos SoC Low Power Audio Subsystem (LPASS)
-
-Required properties:
-
- - compatible		: "samsung,exynos5433-lpass"
- - reg			: should contain the LPASS top SFR region location
-			  and size
- - clock-names		: should contain following required clocks: "sfr0_ctrl"
- - clocks		: should contain clock specifiers of all clocks, which
-			  input names have been specified in clock-names
-			  property, in same order.
- - #address-cells	: should be 1
- - #size-cells		: should be 1
- - ranges		: must be present
-
-Each IP block of the Low Power Audio Subsystem should be specified as
-an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
-UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
-
-Bindings of the sub-nodes are described in:
-  ../serial/samsung_uart.yaml
-  ../sound/samsung-i2s.txt
-  ../dma/arm-pl330.txt
-
-
-Example:
-
-audio-subsystem {
-	compatible = "samsung,exynos5433-lpass";
-	reg = <0x11400000 0x100>, <0x11500000 0x08>;
-	clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
-	clock-names = "sfr0_ctrl";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	adma: adma@11420000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x11420000 0x1000>;
-		interrupts = <0 73 0>;
-		clocks = <&cmu_aud CLK_ACLK_DMAC>;
-		clock-names = "apb_pclk";
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-	i2s0: i2s0@11440000 {
-		compatible = "samsung,exynos7-i2s";
-		reg = <0x11440000 0x100>;
-		dmas = <&adma 0 &adma 2>;
-		dma-names = "tx", "rx";
-		interrupts = <0 70 0>;
-		clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
-			 <&cmu_aud CLK_SCLK_AUD_I2S>,
-			 <&cmu_aud CLK_SCLK_I2S_BCLK>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-	};
-
-	serial_3: serial@11460000 {
-		compatible = "samsung,exynos5433-uart";
-		reg = <0x11460000 0x100>;
-		interrupts = <0 67 0>;
-		clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
-			 <&cmu_aud CLK_SCLK_AUD_UART>;
-		clock-names = "uart", "clk_uart_baud0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart_aud_bus>;
-	};
- };
diff --git a/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml b/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml
new file mode 100644
index 0000000000..bae55c9896
--- /dev/null
+++ b/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,exynos5433-lpass.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Low Power Audio Subsystem (LPASS)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,exynos5433-lpass
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sfr0_ctrl
+
+  power-domains:
+    maxItems: 1
+
+  ranges: true
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^dma-controller@[0-9a-f]+$":
+    $ref: /schemas/dma/arm,pl330.yaml
+
+  "^i2s@[0-9a-f]+$":
+    $ref: /schemas/sound/samsung-i2s.yaml
+
+  "^serial@[0-9a-f]+$":
+    $ref: /schemas/serial/samsung_uart.yaml
+
+required:
+  - compatible
+  - '#address-cells'
+  - clocks
+  - clock-names
+  - ranges
+  - reg
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    audio-subsystem@11400000 {
+        compatible = "samsung,exynos5433-lpass";
+        reg = <0x11400000 0x100>, <0x11500000 0x08>;
+        clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
+        clock-names = "sfr0_ctrl";
+        power-domains = <&pd_aud>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        dma-controller@11420000 {
+            compatible = "arm,pl330", "arm,primecell";
+            reg = <0x11420000 0x1000>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_aud CLK_ACLK_DMAC>;
+            clock-names = "apb_pclk";
+            #dma-cells = <1>;
+            #dma-channels = <8>;
+            #dma-requests = <32>;
+            power-domains = <&pd_aud>;
+        };
+
+        i2s@11440000 {
+            compatible = "samsung,exynos7-i2s";
+            reg = <0x11440000 0x100>;
+            dmas = <&adma 0>, <&adma 2>;
+            dma-names = "tx", "rx";
+            interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
+                     <&cmu_aud CLK_SCLK_AUD_I2S>,
+                     <&cmu_aud CLK_SCLK_I2S_BCLK>;
+            clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+            #clock-cells = <1>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&i2s0_bus>;
+            power-domains = <&pd_aud>;
+            #sound-dai-cells = <1>;
+        };
+
+        serial@11460000 {
+            compatible = "samsung,exynos5433-uart";
+            reg = <0x11460000 0x100>;
+            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
+                     <&cmu_aud CLK_SCLK_AUD_UART>;
+            clock-names = "uart", "clk_uart_baud0";
+            pinctrl-names = "default";
+            pinctrl-0 = <&uart_aud_bus>;
+            power-domains = <&pd_aud>;
+        };
+    };
diff --git a/dts/Bindings/mfd/silergy,sy7636a.yaml b/dts/Bindings/mfd/silergy,sy7636a.yaml
new file mode 100644
index 0000000000..6de74c7016
--- /dev/null
+++ b/dts/Bindings/mfd/silergy,sy7636a.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy7636a PMIC
+
+maintainers:
+  - Alistair Francis <alistair@alistair23.me>
+
+properties:
+  compatible:
+    const: silergy,sy7636a
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  epd-pwr-good-gpios:
+    description:
+      Specifying the power good GPIOs.
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    properties:
+      compatible:
+        const: silergy,sy7636a-regulator
+
+      vcom:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        description:
+          The regulator for the compenstation voltage. Enabling/disabling this
+          enables/disables the entire device.
+        properties:
+          regulator-name:
+            const: vcom
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@62 {
+        compatible = "silergy,sy7636a";
+        reg = <0x62>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_epdpmic>;
+        #thermal-sensor-cells = <0>;
+
+        regulators {
+          reg_epdpmic: vcom {
+            regulator-name = "vcom";
+            regulator-boot-on;
+          };
+        };
+      };
+    };
+...
diff --git a/dts/Bindings/mfd/stericsson,ab8500.yaml b/dts/Bindings/mfd/stericsson,ab8500.yaml
new file mode 100644
index 0000000000..623a4b5cd2
--- /dev/null
+++ b/dts/Bindings/mfd/stericsson,ab8500.yaml
@@ -0,0 +1,500 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/stericsson,ab8500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson Analog Baseband AB8500 and AB8505
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  the AB8500 "Analog Baseband" is the mixed-signals integrated circuit
+  handling power management (regulators), analog-to-digital conversion
+  (ADC), battery charging, fuel gauging of the battery, battery-backed
+  RTC, PWM, USB PHY and some GPIO lines in the ST-Ericsson U8500 platforms
+  in connection with the DB8500 digital baseband. The DB8500 PRCMU
+  communicates directly and autonomously with the AB8500 and thus it
+  appears as a subnode of the DB8500 PRCMU. An altered version called
+  AB8505 also exist, the difference in AB8505 is that some of the USB and
+  USB charging handling has changed, and it has an embedded USB-to-serial
+  converter. Most subblocks takes their interrupts directly from the
+  AB8500 embedded interrupt controller.
+
+properties:
+  $nodename:
+    pattern: '^ab850[05]$'
+
+  compatible:
+    enum:
+      - stericsson,ab8500
+      - stericsson,ab8505
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  # Some subnodes use a reg, some don't. Those that do use a single cell.
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clock-controller:
+    description: Node describing the AB8500 clock controller. This
+      provides the reference clock for the entire U8500 system and
+      the DB8500 counterpart.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-clk
+
+      '#clock-cells':
+        const: 1
+
+  gpio:
+    description: Node describing the AB8500 GPIO controller. A few
+      GPIO pins available for misc usage.
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - stericsson,ab8500-gpio
+          - stericsson,ab8505-gpio
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+  rtc:
+    description: Node describing the AB8500 battery-backed RTC.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-rtc
+
+      interrupts:
+        items:
+          - description: 60 second interval alarm interrupt
+          - description: RTC alarm
+
+      interrupt-names:
+        items:
+          - const: 60S
+          - const: ALARM
+
+  adc:
+    description: Node describing the AB8500 general purpose analog to digital
+      converter, GPADC.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-gpadc
+
+      # AB8505 only supports one (software) EOC interrupt
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      interrupt-names: true
+
+      vddadc-supply: true
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      '#io-channel-cells':
+        const: 1
+
+    patternProperties:
+      "^channel@[0-9a-f]+$":
+        type: object
+        $ref: ../iio/adc/adc.yaml#
+        description: Represents each of the external channels which are
+          connected to the ADC.
+
+        properties:
+          reg:
+            items:
+              minimum: 1
+              maximum: 31
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - vddadc-supply
+      - '#address-cells'
+      - '#size-cells'
+      - '#io-channel-cells'
+
+    additionalProperties: false
+
+  thermal:
+    description: Node describing the AB8500 thermal control block. All this block
+      really does is to fire an interrupt when the die becomes 130 degrees Celsius
+      in temperature.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,abx500-temp
+
+      interrupts:
+        items:
+          - description: Thermal warm warning interrupt
+
+      interrupt-names:
+        items:
+          - const: ABX500_TEMP_WARM
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  ab8500_fg:
+    description: Node describing the AB8500 fuel gauge control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-fg.yaml
+
+  ab8500_btemp:
+    description: Node describing the AB8500 battery temperature control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-btemp.yaml
+
+  ab8500_charger:
+    description: Node describing the AB8500 battery charger control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-charger.yaml
+
+  ab8500_chargalg:
+    description: Node describing the AB8500 battery charger algorithm.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-chargalg.yaml
+
+  phy:
+    description: Node describing the AB8500 USB PHY control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-usb
+
+      interrupts:
+        items:
+          - description: ID wakeup rising IRQ
+          - description: ID wakeup falling IRQ
+          - description: VBUS detection falling IRQ
+          - description: VBUS detection rising IRQ
+          - description: USB link status change IRQ
+          - description: ADP probe plug IRQ
+          - description: ADP probe unplug IRQ
+
+      interrupt-names:
+        items:
+          - const: ID_WAKEUP_R
+          - const: ID_WAKEUP_F
+          - const: VBUS_DET_F
+          - const: VBUS_DET_R
+          - const: USB_LINK_STATUS
+          - const: USB_ADP_PROBE_PLUG
+          - const: USB_ADP_PROBE_UNPLUG
+
+      vddulpivio18-supply: true
+      v-ape-supply: true
+      musb_1v8-supply: true
+
+      clocks:
+        items:
+          - description: PRCMY system clock
+
+      clock-names:
+        items:
+          - const: sysclk
+
+      '#phy-cells':
+        const: 0
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - vddulpivio18-supply
+      - v-ape-supply
+      - musb_1v8-supply
+      - clocks
+      - clock-names
+      - '#phy-cells'
+
+    additionalProperties: false
+
+  key:
+    description: Node describing the AB8500 power-on key control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-poweron-key
+
+      interrupts:
+        items:
+          - description: ON key falling IRQ
+          - description: ON key rising IRQ
+
+      interrupt-names:
+        items:
+          - const: ONKEY_DBF
+          - const: ONKEY_DBR
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  ab8500-sysctrl:
+    description: Node describing the AB8500 system control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-sysctrl
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  codec:
+    description: Node describing the AB8500 audio codec block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-codec
+
+      V-AUD-supply: true
+      V-AMIC1-supply: true
+      V-AMIC2-supply: true
+      V-DMIC-supply: true
+
+      clocks:
+        items:
+          - description: Audio system clock
+
+      clock-names:
+        items:
+          - const: audioclk
+
+      stericsson,earpeice-cmv:
+        description: Earpeice voltage
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 950, 1100, 1270, 1580 ]
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  regulator:
+    description: Node describing the AB8500 internal regulators.
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - stericsson,ab8500-regulator
+          - stericsson,ab8505-regulator
+
+      vin-supply:
+        description: The regulator supplying all of the internal regulators
+          with power.
+
+      ab8500_ldo_aux1:
+        description: The voltage for the auxilary LDO regulator 1
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_aux2:
+        description: The voltage for the auxilary LDO regulator 2
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_aux3:
+        description: The voltage for the auxilary LDO regulator 3
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_aux4:
+        description: The voltage for the auxilary LDO regulator 4
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_aux5:
+        description: The voltage for the auxilary LDO regulator 5
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_aux6:
+        description: The voltage for the auxilary LDO regulator 6
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      # There is never any AUX7 regulator which is confusing
+
+      ab8500_ldo_aux8:
+        description: The voltage for the auxilary LDO regulator 8
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_intcore:
+        description: The LDO regulator for the internal core voltage
+          of the AB8500
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_adc:
+        description: Analog power regulator for the analog to digital converter
+          ADC, only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_tvout:
+        description: The voltage for the TV output regulator, incidentally
+          this voltage is also used for other purposes such as measuring
+          the temperature of the NTC thermistor on the battery.
+          Only present on AB8500.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_audio:
+        description: The LDO regulator for the audio codec output
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_anamic1:
+        description: The LDO regulator for the analog microphone 1
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_anamic2:
+        description: The LDO regulator for the analog microphone 2
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_dmic:
+        description: The LDO regulator for the digital microphone
+          only present on AB8500
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ldo_ana:
+        description: Analog power regulator for CSI and DSI interfaces,
+          Camera Serial Interface CSI and Display Serial Interface DSI.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+
+  regulator-external:
+    description: Node describing the AB8500 external regulators. This
+      concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3
+      that are normally controlled by external electronics but also
+      sometimes need to be explicitly controlled by software.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-ext-regulator
+
+      ab8500_ext1:
+        description: The voltage for the VSMPS1 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ext2:
+        description: The voltage for the VSMPS2 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      ab8500_ext3:
+        description: The voltage for the VSMPS3 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+patternProperties:
+  "^pwm@[1-9]+?$":
+    type: object
+    $ref: ../pwm/pwm.yaml#
+    description: Represents each of the PWM blocks in the AB8500
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-pwm
+
+      reg: true
+
+      clocks:
+        items:
+          - description: internal clock
+
+      clock-names:
+        items:
+          - const: intclk
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - clock-controller
+  - gpio
+  - rtc
+  - adc
+  - thermal
+  - ab8500_fg
+  - ab8500_btemp
+  - ab8500_charger
+  - ab8500_chargalg
+  - phy
+  - key
+  - regulator
+
+additionalProperties: false
diff --git a/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml b/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml
index a0d4bad5dc..1d4d88f7e8 100644
--- a/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml
+++ b/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml
@@ -263,6 +263,7 @@ patternProperties:
       set of devicetree bindings. The AB8505 is a newer version of the
       same ASIC.
     type: object
+    $ref: stericsson,ab8500.yaml#
 
 required:
   - compatible
diff --git a/dts/Bindings/mfd/syscon.yaml b/dts/Bindings/mfd/syscon.yaml
index eeac1cbc5a..13baa452cc 100644
--- a/dts/Bindings/mfd/syscon.yaml
+++ b/dts/Bindings/mfd/syscon.yaml
@@ -44,6 +44,11 @@ properties:
               - hisilicon,hi6220-sramctrl
               - hisilicon,pcie-sas-subctrl
               - hisilicon,peri-subctrl
+              - intel,lgm-syscon
+              - marvell,armada-3700-usb2-host-misc
+              - mediatek,mt8135-pctl-a-syscfg
+              - mediatek,mt8135-pctl-b-syscfg
+              - microchip,lan966x-cpu-syscon
               - microchip,sparx5-cpu-syscon
               - mstar,msc313-pmsleep
               - rockchip,px30-qos