dts: update to v5.1-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 8 insertions, 29 deletions

diff --git a/dts/Bindings/mmc/fsl-imx-esdhc.txt b/dts/Bindings/mmc/fsl-imx-esdhc.txt
index 9201a7d8d7..540c65ed9c 100644
--- a/dts/Bindings/mmc/fsl-imx-esdhc.txt
+++ b/dts/Bindings/mmc/fsl-imx-esdhc.txt
@@ -15,6 +15,7 @@ Required properties:
 	       "fsl,imx6q-usdhc"
 	       "fsl,imx6sl-usdhc"
 	       "fsl,imx6sx-usdhc"
+	       "fsl,imx6ull-usdhc"
 	       "fsl,imx7d-usdhc"
 	       "fsl,imx8qxp-usdhc"
 
diff --git a/dts/Bindings/mmc/mmc.txt b/dts/Bindings/mmc/mmc.txt
index f5a0923b34..cdbcfd3a4f 100644
--- a/dts/Bindings/mmc/mmc.txt
+++ b/dts/Bindings/mmc/mmc.txt
@@ -62,6 +62,8 @@ Optional properties:
   be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay
   waiting for I/O signalling and card power supply to be stable, regardless of
   whether pwrseq-simple is used. Default to 10ms if no available.
+- supports-cqe : The presence of this property indicates that the corresponding
+  MMC host controller supports HW command queue feature.
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"
diff --git a/dts/Bindings/mmc/nvidia,tegra20-sdhci.txt b/dts/Bindings/mmc/nvidia,tegra20-sdhci.txt
index 32b4b4e419..2cecdc71d9 100644
--- a/dts/Bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/dts/Bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -39,12 +39,16 @@ sdhci@c8000200 {
 	bus-width = <8>;
 };
 
-Optional properties for Tegra210 and Tegra186:
+Optional properties for Tegra210, Tegra186 and Tegra194:
 - pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage
   configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8"
   for controllers supporting multiple voltage levels. The order of names
   should correspond to the pin configuration states in pinctrl-0 and
   pinctrl-1.
+- pinctrl-names : "sdmmc-3v3-drv" and "sdmmc-1v8-drv" are applicable for
+  Tegra210 where pad config registers are in the pinmux register domain
+  for pull-up-strength and pull-down-strength values configuration when
+  using pads at 3V3 and 1V8 levels.
 - nvidia,only-1-8-v : The presence of this property indicates that the
   controller operates at a 1.8 V fixed I/O voltage.
 - nvidia,pad-autocal-pull-up-offset-3v3,
diff --git a/dts/Bindings/mmc/ti-omap.txt b/dts/Bindings/mmc/ti-omap.txt
index 8de5799697..02fd31cf36 100644
--- a/dts/Bindings/mmc/ti-omap.txt
+++ b/dts/Bindings/mmc/ti-omap.txt
@@ -24,31 +24,3 @@ Examples:
 		dmas = <&sdma 61 &sdma 62>;
 		dma-names = "tx", "rx";
 	};
-
-* TI MMC host controller for OMAP1 and 2420
-
-The MMC Host Controller on TI OMAP1 and 2420 family provides
-an interface for MMC, SD, and SDIO types of memory cards.
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the omap mmc driver.
-
-Note that this driver will not work with omap2430 or later omaps,
-please see the omap hsmmc driver for the current omaps.
-
-Required properties:
-- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
-- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
-  instance starting 1
-
-Examples:
-
-	msdi1: mmc@4809c000 {
-		compatible = "ti,omap2420-mmc";
-		ti,hwmods = "msdi1";
-		reg = <0x4809c000 0x80>;
-		interrupts = <83>;
-		dmas = <&sdma 61 &sdma 62>;
-		dma-names = "tx", "rx";
-	};
-