summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/mmc
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2018-06-21 13:44:30 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2018-06-22 08:16:13 +0200
commite4067b75fb6ca83a58b2c342a0b3ee12e1223c4e (patch)
treebe013bf46292f4696ac776bc91c1cf35b7adab24 /dts/Bindings/mmc
parentfe040e0977fab29216f5039e8f9b04e6dbec859a (diff)
downloadbarebox-e4067b75fb6ca83a58b2c342a0b3ee12e1223c4e.tar.gz
dts: update to v4.18-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/mmc')
-rw-r--r--dts/Bindings/mmc/amlogic,meson-gx.txt3
-rw-r--r--dts/Bindings/mmc/bluefield-dw-mshc.txt29
-rw-r--r--dts/Bindings/mmc/exynos-dw-mshc.txt2
-rw-r--r--dts/Bindings/mmc/jz4740.txt38
-rw-r--r--dts/Bindings/mmc/microchip,sdhci-pic32.txt2
-rw-r--r--dts/Bindings/mmc/mmc.txt6
-rw-r--r--dts/Bindings/mmc/sdhci-omap.txt7
-rw-r--r--dts/Bindings/mmc/sdhci-st.txt2
-rw-r--r--dts/Bindings/mmc/tmio_mmc.txt6
9 files changed, 88 insertions, 7 deletions
diff --git a/dts/Bindings/mmc/amlogic,meson-gx.txt b/dts/Bindings/mmc/amlogic,meson-gx.txt
index 50bf611..13e7040 100644
--- a/dts/Bindings/mmc/amlogic,meson-gx.txt
+++ b/dts/Bindings/mmc/amlogic,meson-gx.txt
@@ -12,6 +12,7 @@ Required properties:
- "amlogic,meson-gxbb-mmc"
- "amlogic,meson-gxl-mmc"
- "amlogic,meson-gxm-mmc"
+ - "amlogic,meson-axg-mmc"
- clocks : A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
- clock-names: Should contain the following:
"core" - Main peripheral bus clock
@@ -19,6 +20,7 @@ Required properties:
"clkin1" - Other parent clock of internal mux
The driver has an internal mux clock which switches between clkin0 and clkin1 depending on the
clock rate requested by the MMC core.
+- resets : phandle of the internal reset line
Example:
@@ -29,4 +31,5 @@ Example:
clocks = <&clkc CLKID_SD_EMMC_A>, <&xtal>, <&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
pinctrl-0 = <&emmc_pins>;
+ resets = <&reset RESET_SD_EMMC_A>;
};
diff --git a/dts/Bindings/mmc/bluefield-dw-mshc.txt b/dts/Bindings/mmc/bluefield-dw-mshc.txt
new file mode 100644
index 0000000..b0f0999
--- /dev/null
+++ b/dts/Bindings/mmc/bluefield-dw-mshc.txt
@@ -0,0 +1,29 @@
+* Mellanox Bluefield SoC specific extensions to the Synopsys Designware
+ Mobile Storage Host Controller
+
+Read synopsys-dw-mshc.txt for more details
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Mellanox Bluefield SoC
+specific extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be one of the following.
+ - "mellanox,bluefield-dw-mshc": for controllers with Mellanox Bluefield SoC
+ specific extensions.
+
+Example:
+
+ /* Mellanox Bluefield SoC MMC */
+ mmc@6008000 {
+ compatible = "mellanox,bluefield-dw-mshc";
+ reg = <0x6008000 0x400>;
+ interrupts = <32>;
+ fifo-depth = <0x100>;
+ clock-frequency = <24000000>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ };
diff --git a/dts/Bindings/mmc/exynos-dw-mshc.txt b/dts/Bindings/mmc/exynos-dw-mshc.txt
index a58c173..0419a63 100644
--- a/dts/Bindings/mmc/exynos-dw-mshc.txt
+++ b/dts/Bindings/mmc/exynos-dw-mshc.txt
@@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host)
rest of the gpios (depending on the bus-width property) are the data lines in
no particular order. The format of the gpio specifier depends on the gpio
controller.
-(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
+(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
Example:
diff --git a/dts/Bindings/mmc/jz4740.txt b/dts/Bindings/mmc/jz4740.txt
new file mode 100644
index 0000000..7cd8c43
--- /dev/null
+++ b/dts/Bindings/mmc/jz4740.txt
@@ -0,0 +1,38 @@
+* Ingenic JZ47xx MMC controllers
+
+This file documents the device tree properties used for the MMC controller in
+Ingenic JZ4740/JZ4780 SoCs. These are in addition to the core MMC properties
+described in mmc.txt.
+
+Required properties:
+- compatible: Should be one of the following:
+ - "ingenic,jz4740-mmc" for the JZ4740
+ - "ingenic,jz4780-mmc" for the JZ4780
+- reg: Should contain the MMC controller registers location and length.
+- interrupts: Should contain the interrupt specifier of the MMC controller.
+- clocks: Clock for the MMC controller.
+
+Optional properties:
+- dmas: List of DMA specifiers with the controller specific format
+ as described in the generic DMA client binding. A tx and rx
+ specifier is required.
+- dma-names: RX and TX DMA request names.
+ Should be "rx" and "tx", in that order.
+
+For additional details on DMA client bindings see ../dma/dma.txt.
+
+Example:
+
+mmc0: mmc@13450000 {
+ compatible = "ingenic,jz4780-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu JZ4780_CLK_MSC0>;
+ clock-names = "mmc";
+
+ dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>, <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+};
diff --git a/dts/Bindings/mmc/microchip,sdhci-pic32.txt b/dts/Bindings/mmc/microchip,sdhci-pic32.txt
index 3149297..f064528 100644
--- a/dts/Bindings/mmc/microchip,sdhci-pic32.txt
+++ b/dts/Bindings/mmc/microchip,sdhci-pic32.txt
@@ -12,7 +12,7 @@ Required properties:
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
- pinctrl-names: A pinctrl state names "default" must be defined.
- pinctrl-0: Phandle referencing pin configuration of the SDHCI controller.
- See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Example:
diff --git a/dts/Bindings/mmc/mmc.txt b/dts/Bindings/mmc/mmc.txt
index 467cd7b..f5a0923 100644
--- a/dts/Bindings/mmc/mmc.txt
+++ b/dts/Bindings/mmc/mmc.txt
@@ -19,6 +19,8 @@ Optional properties:
- wp-gpios: Specify GPIOs for write protection, see gpio binding
- cd-inverted: when present, polarity on the CD line is inverted. See the note
below for the case, when a GPIO is used for the CD line
+- cd-debounce-delay-ms: Set delay time before detecting card after card insert interrupt.
+ It's only valid when cd-gpios is present.
- wp-inverted: when present, polarity on the WP line is inverted. See the note
below for the case, when a GPIO is used for the WP line
- disable-wp: When set no physical WP line is present. This property should
@@ -56,6 +58,10 @@ Optional properties:
- fixed-emmc-driver-type: for non-removable eMMC, enforce this driver type.
The value <n> is the driver type as specified in the eMMC specification
(table 206 in spec version 5.1).
+- post-power-on-delay-ms : It was invented for MMC pwrseq-simple which could
+ be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay
+ waiting for I/O signalling and card power supply to be stable, regardless of
+ whether pwrseq-simple is used. Default to 10ms if no available.
*NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
polarity properties, we have to fix the meaning of the "normal" and "inverted"
diff --git a/dts/Bindings/mmc/sdhci-omap.txt b/dts/Bindings/mmc/sdhci-omap.txt
index 51775a3..393848c 100644
--- a/dts/Bindings/mmc/sdhci-omap.txt
+++ b/dts/Bindings/mmc/sdhci-omap.txt
@@ -4,7 +4,14 @@ Refer to mmc.txt for standard MMC bindings.
Required properties:
- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
+ Should be "ti,k2g-sdhci" for K2G
- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
+ (Not required for K2G).
+- pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50",
+ "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104",
+ "ddr_1_8v-rev11", "ddr_1_8v" or "ddr_3_3v", "hs200_1_8v-rev11",
+ "hs200_1_8v",
+- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
Example:
mmc1: mmc@4809c000 {
diff --git a/dts/Bindings/mmc/sdhci-st.txt b/dts/Bindings/mmc/sdhci-st.txt
index 6b3d40c..ccf82b4 100644
--- a/dts/Bindings/mmc/sdhci-st.txt
+++ b/dts/Bindings/mmc/sdhci-st.txt
@@ -20,7 +20,7 @@ Required properties:
- pinctrl-names: A pinctrl state names "default" must be defined.
- pinctrl-0: Phandle referencing pin configuration of the sd/emmc controller.
- See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- reg: This must provide the host controller base address and it can also
contain the FlashSS Top register for TX/RX delay used by the driver
diff --git a/dts/Bindings/mmc/tmio_mmc.txt b/dts/Bindings/mmc/tmio_mmc.txt
index 2d5287e..839f469 100644
--- a/dts/Bindings/mmc/tmio_mmc.txt
+++ b/dts/Bindings/mmc/tmio_mmc.txt
@@ -26,6 +26,8 @@ Required properties:
"renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC
"renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC
"renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC
+ "renesas,sdhi-r8a77965" - SDHI IP on R8A77965 SoC
+ "renesas,sdhi-r8a77980" - SDHI IP on R8A77980 SoC
"renesas,sdhi-r8a77995" - SDHI IP on R8A77995 SoC
"renesas,sdhi-shmobile" - a generic sh-mobile SDHI controller
"renesas,rcar-gen1-sdhi" - a generic R-Car Gen1 SDHI controller
@@ -67,7 +69,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 314>;
- status = "disabled";
};
sdhi1: sd@ee120000 {
@@ -81,7 +82,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 313>;
- status = "disabled";
};
sdhi2: sd@ee140000 {
@@ -95,7 +95,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 312>;
- status = "disabled";
};
sdhi3: sd@ee160000 {
@@ -109,5 +108,4 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 311>;
- status = "disabled";
};