dts: update to v5.5-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 173 insertions, 61 deletions

diff --git a/dts/Bindings/mtd/cadence-nand-controller.txt b/dts/Bindings/mtd/cadence-nand-controller.txt
new file mode 100644
index 0000000000..f3893c4d3c
--- /dev/null
+++ b/dts/Bindings/mtd/cadence-nand-controller.txt
@@ -0,0 +1,53 @@
+* Cadence NAND controller
+
+Required properties:
+  - compatible : "cdns,hp-nfc"
+  - reg : Contains two entries, each of which is a tuple consisting of a
+	  physical address and length. The first entry is the address and
+	  length of the controller register set. The second entry is the
+	  address and length of the Slave DMA data port.
+  - reg-names: should contain "reg" and "sdma"
+  - #address-cells: should be 1. The cell encodes the chip select connection.
+  - #size-cells : should be 0.
+  - interrupts : The interrupt number.
+  - clocks: phandle of the controller core clock (nf_clk).
+
+Optional properties:
+  - dmas: shall reference DMA channel associated to the NAND controller
+  - cdns,board-delay-ps : Estimated Board delay. The value includes the total
+    round trip delay for the signals and is used for deciding on values
+    associated with data read capture. The example formula for SDR mode is
+    the following:
+    board delay = RE#PAD delay + PCB trace to device + PCB trace from device
+    + DQ PAD delay
+
+Child nodes represent the available NAND chips.
+
+Required properties of NAND chips:
+  - reg: shall contain the native Chip Select ids from 0 to max supported by
+    the cadence nand flash controller
+
+See Documentation/devicetree/bindings/mtd/nand.txt for more details on
+generic bindings.
+
+Example:
+
+nand_controller: nand-controller@60000000 {
+	  compatible = "cdns,hp-nfc";
+	  #address-cells = <1>;
+	  #size-cells = <0>;
+	  reg = <0x60000000 0x10000>, <0x80000000 0x10000>;
+	  reg-names = "reg", "sdma";
+	  clocks = <&nf_clk>;
+	  cdns,board-delay-ps = <4830>;
+	  interrupts = <2 0>;
+	  nand@0 {
+	      reg = <0>;
+	      label = "nand-1";
+	  };
+	  nand@1 {
+	      reg = <1>;
+	      label = "nand-2";
+	  };
+
+};
diff --git a/dts/Bindings/mtd/intel,ixp4xx-flash.txt b/dts/Bindings/mtd/intel,ixp4xx-flash.txt
new file mode 100644
index 0000000000..4bdcb92ae3
--- /dev/null
+++ b/dts/Bindings/mtd/intel,ixp4xx-flash.txt
@@ -0,0 +1,22 @@
+Flash device on Intel IXP4xx SoC
+
+This flash is regular CFI compatible (Intel or AMD extended) flash chips with
+specific big-endian or mixed-endian memory access pattern.
+
+Required properties:
+- compatible : must be "intel,ixp4xx-flash", "cfi-flash";
+- reg : memory address for the flash chip
+- bank-width : width in bytes of flash interface, should be <2>
+
+For the rest of the properties, see mtd-physmap.txt.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Example:
+
+flash@50000000 {
+	compatible = "intel,ixp4xx-flash", "cfi-flash";
+	reg = <0x50000000 0x01000000>;
+	bank-width = <2>;
+};
diff --git a/dts/Bindings/mtd/st,stm32-fmc2-nand.yaml b/dts/Bindings/mtd/st,stm32-fmc2-nand.yaml
new file mode 100644
index 0000000000..b059267f6d
--- /dev/null
+++ b/dts/Bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/st,stm32-fmc2-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
+
+maintainers:
+  - Christophe Kerello <christophe.kerello@st.com>
+
+allOf:
+  - $ref: "nand-controller.yaml#"
+
+properties:
+  compatible:
+    const: st,stm32mp15-fmc2
+
+  reg:
+    items:
+      - description: Registers
+      - description: Chip select 0 data
+      - description: Chip select 0 command
+      - description: Chip select 0 address space
+      - description: Chip select 1 data
+      - description: Chip select 1 command
+      - description: Chip select 1 address space
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: tx DMA channel
+      - description: rx DMA channel
+      - description: ecc DMA channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+      - const: ecc
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    properties:
+      nand-ecc-step-size:
+        const: 512
+
+      nand-ecc-strength:
+        enum: [1, 4 ,8 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    nand-controller@58002000 {
+      compatible = "st,stm32mp15-fmc2";
+      reg = <0x58002000 0x1000>,
+            <0x80000000 0x1000>,
+            <0x88010000 0x1000>,
+            <0x88020000 0x1000>,
+            <0x81000000 0x1000>,
+            <0x89010000 0x1000>,
+            <0x89020000 0x1000>;
+            interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+            dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>,
+                   <&mdma1 20 0x10 0x12000a08 0x0 0x0>,
+                   <&mdma1 21 0x10 0x12000a0a 0x0 0x0>;
+            dma-names = "tx", "rx", "ecc";
+            clocks = <&rcc FMC_K>;
+            resets = <&rcc FMC_R>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+        nand-on-flash-bbt;
+        #address-cells = <1>;
+        #size-cells = <1>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/mtd/stm32-fmc2-nand.txt b/dts/Bindings/mtd/stm32-fmc2-nand.txt
deleted file mode 100644
index e55895e8da..0000000000
--- a/dts/Bindings/mtd/stm32-fmc2-nand.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-STMicroelectronics Flexible Memory Controller 2 (FMC2)
-NAND Interface
-
-Required properties:
-- compatible: Should be one of:
-              * st,stm32mp15-fmc2
-- reg: NAND flash controller memory areas.
-       First region contains the register location.
-       Regions 2 to 4 respectively contain the data, command,
-       and address space for CS0.
-       Regions 5 to 7 contain the same areas for CS1.
-- interrupts: The interrupt number
-- pinctrl-0: Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
-- clocks: The clock needed by the NAND flash controller
-
-Optional properties:
-- resets: Reference to a reset controller asserting the FMC controller
-- dmas: DMA specifiers (see: dma/stm32-mdma.txt)
-- dma-names: Must be "tx", "rx" and "ecc"
-
-* NAND device bindings:
-
-Required properties:
-- reg: describes the CS lines assigned to the NAND device.
-
-Optional properties:
-- nand-on-flash-bbt: see nand-controller.yaml
-- nand-ecc-strength: see nand-controller.yaml
-- nand-ecc-step-size: see nand-controller.yaml
-
-The following ECC strength and step size are currently supported:
- - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming)
- - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4)
- - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) (default)
-
-Example:
-
-	fmc: nand-controller@58002000 {
-		compatible = "st,stm32mp15-fmc2";
-		reg = <0x58002000 0x1000>,
-		      <0x80000000 0x1000>,
-		      <0x88010000 0x1000>,
-		      <0x88020000 0x1000>,
-		      <0x81000000 0x1000>,
-		      <0x89010000 0x1000>,
-		      <0x89020000 0x1000>;
-		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&rcc FMC_K>;
-		resets = <&rcc FMC_R>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fmc_pins_a>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		nand@0 {
-			reg = <0>;
-			nand-on-flash-bbt;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-	};