summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/net/nfc
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2014-04-25 11:22:32 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2014-04-28 09:08:46 +0200
commit00ce25c6dcdae5582ae4be37147ab33678adc995 (patch)
tree41c93102ae304a61738c31353e3cb5336ef0b297 /dts/Bindings/net/nfc
parent0af79fbb6779921d3f1962773adb7fb57d3c89d4 (diff)
downloadbarebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.gz
barebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.xz
Add devicetree source files as of Linux-3.15-rc2
This adds the Linux dts files to barebox. The dts files are generated from Ian Campbells device-tree-rebasing.git: git://xenbits.xen.org/people/ianc/device-tree-rebasing.git The dts are found in dts/ in the barebox repository and will be updated from upstream regularly, probably for each upstream -rc. To keep the synchronization with upstream easy no changes to the original files are allowed under dts/. Instead changes to upstream dts files will be done using overlays in arch/$ARCH/dts/. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/net/nfc')
-rw-r--r--dts/Bindings/net/nfc/trf7970a.txt34
1 files changed, 34 insertions, 0 deletions
diff --git a/dts/Bindings/net/nfc/trf7970a.txt b/dts/Bindings/net/nfc/trf7970a.txt
new file mode 100644
index 0000000000..8dd3ef7bc5
--- /dev/null
+++ b/dts/Bindings/net/nfc/trf7970a.txt
@@ -0,0 +1,34 @@
+* Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
+
+Required properties:
+- compatible: Should be "ti,trf7970a".
+- spi-max-frequency: Maximum SPI frequency (<= 2000000).
+- interrupt-parent: phandle of parent interrupt handler.
+- interrupts: A single interrupt specifier.
+- ti,enable-gpios: Two GPIO entries used for 'EN' and 'EN2' pins on the
+ TRF7970A.
+- vin-supply: Regulator for supply voltage to VIN pin
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBone with TRF7970A on SPI1):
+
+&spi1 {
+ status = "okay";
+
+ nfc@0 {
+ compatible = "ti,trf7970a";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trf7970a_default>;
+ spi-max-frequency = <2000000>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <14 0>;
+ ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>,
+ <&gpio2 5 GPIO_ACTIVE_LOW>;
+ vin-supply = <&ldo3_reg>;
+ status = "okay";
+ };
+};