summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/net/nfc
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2014-06-17 22:16:07 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2014-06-19 09:41:51 +0200
commit9313920df6d3d55fbd03ce8ec1c0da9a10c29824 (patch)
treeef80d80abbaf46293b777ead52caddd9d5d97644 /dts/Bindings/net/nfc
parent83e875e1f45beffe399cff0ff6128e0fca9da168 (diff)
downloadbarebox-9313920df6d3d55fbd03ce8ec1c0da9a10c29824.tar.gz
barebox-9313920df6d3d55fbd03ce8ec1c0da9a10c29824.tar.xz
dts: update to v3.16-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/net/nfc')
-rw-r--r--dts/Bindings/net/nfc/pn544.txt35
-rw-r--r--dts/Bindings/net/nfc/st21nfca.txt33
-rw-r--r--dts/Bindings/net/nfc/trf7970a.txt2
3 files changed, 70 insertions, 0 deletions
diff --git a/dts/Bindings/net/nfc/pn544.txt b/dts/Bindings/net/nfc/pn544.txt
new file mode 100644
index 0000000000..dab69f3616
--- /dev/null
+++ b/dts/Bindings/net/nfc/pn544.txt
@@ -0,0 +1,35 @@
+* NXP Semiconductors PN544 NFC Controller
+
+Required properties:
+- compatible: Should be "nxp,pn544-i2c".
+- clock-frequency: IC work frequency.
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- enable-gpios: Output GPIO pin used for enabling/disabling the PN544
+- firmware-gpios: Output GPIO pin used to enter firmware download mode
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBone with PN544 on I2C2):
+
+&i2c2 {
+
+ status = "okay";
+
+ pn544: pn544@28 {
+
+ compatible = "nxp,pn544-i2c";
+
+ reg = <0x28>;
+ clock-frequency = <400000>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 GPIO_ACTIVE_HIGH>;
+
+ enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/dts/Bindings/net/nfc/st21nfca.txt b/dts/Bindings/net/nfc/st21nfca.txt
new file mode 100644
index 0000000000..e4faa2e8df
--- /dev/null
+++ b/dts/Bindings/net/nfc/st21nfca.txt
@@ -0,0 +1,33 @@
+* STMicroelectronics SAS. ST21NFCA NFC Controller
+
+Required properties:
+- compatible: Should be "st,st21nfca_i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- enable-gpios: Output GPIO pin used for enabling/disabling the ST21NFCA
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
+
+&i2c2 {
+
+ status = "okay";
+
+ st21nfca: st21nfca@1 {
+
+ compatible = "st,st21nfca_i2c";
+
+ reg = <0x01>;
+ clock-frequency = <400000>;
+
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/dts/Bindings/net/nfc/trf7970a.txt b/dts/Bindings/net/nfc/trf7970a.txt
index 8dd3ef7bc5..1e43613368 100644
--- a/dts/Bindings/net/nfc/trf7970a.txt
+++ b/dts/Bindings/net/nfc/trf7970a.txt
@@ -12,6 +12,7 @@ Required properties:
Optional SoC Specific Properties:
- pinctrl-names: Contains only one value - "default".
- pintctrl-0: Specifies the pin control groups used for this controller.
+- autosuspend-delay: Specify autosuspend delay in milliseconds.
Example (for ARM-based BeagleBone with TRF7970A on SPI1):
@@ -29,6 +30,7 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>,
<&gpio2 5 GPIO_ACTIVE_LOW>;
vin-supply = <&ldo3_reg>;
+ autosuspend-delay = <30000>;
status = "okay";
};
};