summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/net/nfc
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2014-09-01 09:47:17 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2014-09-02 11:01:29 +0200
commita595ff6eea05b919567f96d71e7e2c7b6236b8ac (patch)
tree2d7cea529b6a06be744116e29e8a97b0c8de1981 /dts/Bindings/net/nfc
parent7955f4315187665690f51e20698d4c12c68e008f (diff)
downloadbarebox-a595ff6eea05b919567f96d71e7e2c7b6236b8ac.tar.gz
barebox-a595ff6eea05b919567f96d71e7e2c7b6236b8ac.tar.xz
dts: update to v3.17-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/net/nfc')
-rw-r--r--dts/Bindings/net/nfc/st21nfcb.txt33
1 files changed, 33 insertions, 0 deletions
diff --git a/dts/Bindings/net/nfc/st21nfcb.txt b/dts/Bindings/net/nfc/st21nfcb.txt
new file mode 100644
index 0000000000..3b58ae4803
--- /dev/null
+++ b/dts/Bindings/net/nfc/st21nfcb.txt
@@ -0,0 +1,33 @@
+* STMicroelectronics SAS. ST21NFCB NFC Controller
+
+Required properties:
+- compatible: Should be "st,st21nfcb_i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- reset-gpios: Output GPIO pin used to reset the ST21NFCB
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
+
+&i2c2 {
+
+ status = "okay";
+
+ st21nfcb: st21nfcb@8 {
+
+ compatible = "st,st21nfcb_i2c";
+
+ reg = <0x08>;
+ clock-frequency = <400000>;
+
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+ };
+};