dts: update to v5.1-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 4 insertions, 5 deletions

diff --git a/dts/Bindings/net/stm32-dwmac.txt b/dts/Bindings/net/stm32-dwmac.txt
index 1341012722..a90eef11dc 100644
--- a/dts/Bindings/net/stm32-dwmac.txt
+++ b/dts/Bindings/net/stm32-dwmac.txt
@@ -14,8 +14,7 @@ Required properties:
 - clock-names: Should be "stmmaceth" for the host clock.
 	       Should be "mac-clk-tx" for the MAC TX clock.
 	       Should be "mac-clk-rx" for the MAC RX clock.
-	       For MPU family need to add also "ethstp" for power mode clock and,
-	                                       "syscfg-clk" for SYSCFG clock.
+	       For MPU family need to add also "ethstp" for power mode clock
 - interrupt-names: Should contain a list of interrupt names corresponding to
            the interrupts in the interrupts property, if available.
 		   Should be "macirq" for the main MAC IRQ
@@ -24,9 +23,9 @@ Required properties:
 	       encompases the glue register, and the offset of the control register.
 
 Optional properties:
-- clock-names:     For MPU family "mac-clk-ck" for PHY without quartz
-- st,int-phyclk (boolean) :  valid only where PHY do not have quartz and need to be clock
-	           by RCC
+- clock-names:     For MPU family "eth-ck" for PHY without quartz
+- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
+- st,eth-ref-clk-sel (boolean) :  set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK.
 
 Example: