summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/net
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2018-09-11 08:26:30 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2018-09-11 17:23:13 +0200
commit35f607bc7da71b302fd6bf3d6d48d7ea66df1195 (patch)
treedd2cf14c56430d21079c794fa6e03d7f5d91070e /dts/Bindings/net
parent625eea2765d94aee016cf25d9cabecde8eae0775 (diff)
downloadbarebox-35f607bc7da71b302fd6bf3d6d48d7ea66df1195.tar.gz
dts: update to v4.19-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/net')
-rw-r--r--dts/Bindings/net/amd-xgbe.txt2
-rw-r--r--dts/Bindings/net/brcm,mdio-mux-iproc.txt7
-rw-r--r--dts/Bindings/net/btusb.txt1
-rw-r--r--dts/Bindings/net/can/holt_hi311x.txt1
-rw-r--r--dts/Bindings/net/can/microchip,mcp251x.txt1
-rw-r--r--dts/Bindings/net/can/xilinx_can.txt36
-rw-r--r--dts/Bindings/net/cpsw.txt1
-rw-r--r--dts/Bindings/net/davicom-dm9000.txt1
-rw-r--r--dts/Bindings/net/dsa/b53.txt8
-rw-r--r--dts/Bindings/net/dsa/ksz.txt4
-rw-r--r--dts/Bindings/net/dsa/marvell.txt1
-rw-r--r--dts/Bindings/net/dsa/realtek-smi.txt153
-rw-r--r--dts/Bindings/net/dsa/vitesse,vsc73xx.txt81
-rw-r--r--dts/Bindings/net/dwmac-sun8i.txt8
-rw-r--r--dts/Bindings/net/fsl-fman.txt25
-rw-r--r--dts/Bindings/net/hisilicon-hns-dsaf.txt1
-rw-r--r--dts/Bindings/net/ibm,emac.txt1
-rw-r--r--dts/Bindings/net/marvell-bt-8xxx.txt1
-rw-r--r--dts/Bindings/net/mediatek,mt7620-gsw.txt2
-rw-r--r--dts/Bindings/net/mediatek-bluetooth.txt35
-rw-r--r--dts/Bindings/net/mediatek-net.txt3
-rw-r--r--dts/Bindings/net/microchip,enc28j60.txt3
-rw-r--r--dts/Bindings/net/nfc/nxp-nci.txt1
-rw-r--r--dts/Bindings/net/nfc/pn533-i2c.txt1
-rw-r--r--dts/Bindings/net/nfc/pn544.txt3
-rw-r--r--dts/Bindings/net/nfc/s3fwrn5.txt1
-rw-r--r--dts/Bindings/net/nfc/st-nci-i2c.txt1
-rw-r--r--dts/Bindings/net/nfc/st-nci-spi.txt1
-rw-r--r--dts/Bindings/net/nfc/st21nfca.txt2
-rw-r--r--dts/Bindings/net/nfc/st95hf.txt3
-rw-r--r--dts/Bindings/net/nfc/trf7970a.txt1
-rw-r--r--dts/Bindings/net/phy.txt2
-rw-r--r--dts/Bindings/net/qca,qca7000.txt1
-rw-r--r--dts/Bindings/net/qualcomm-bluetooth.txt29
-rw-r--r--dts/Bindings/net/ralink,rt2880-net.txt2
-rw-r--r--dts/Bindings/net/ralink,rt3050-esw.txt2
-rw-r--r--dts/Bindings/net/renesas,ravb.txt5
-rw-r--r--dts/Bindings/net/rockchip-dwmac.txt1
-rw-r--r--dts/Bindings/net/samsung-sxgbe.txt2
-rw-r--r--dts/Bindings/net/sh_eth.txt2
-rw-r--r--dts/Bindings/net/snps,dwc-qos-ethernet.txt2
-rw-r--r--dts/Bindings/net/stmmac.txt7
-rw-r--r--dts/Bindings/net/wireless/brcm,bcm43xx-fmac.txt2
-rw-r--r--dts/Bindings/net/wireless/marvell-8xxx.txt1
-rw-r--r--dts/Bindings/net/wireless/ti,wl1251.txt2
-rw-r--r--dts/Bindings/net/wireless/ti,wlcore,spi.txt4
-rw-r--r--dts/Bindings/net/wireless/ti,wlcore.txt2
47 files changed, 347 insertions, 109 deletions
diff --git a/dts/Bindings/net/amd-xgbe.txt b/dts/Bindings/net/amd-xgbe.txt
index 4bb624a..93dcb79 100644
--- a/dts/Bindings/net/amd-xgbe.txt
+++ b/dts/Bindings/net/amd-xgbe.txt
@@ -8,8 +8,6 @@ Required properties:
- SerDes Rx/Tx registers
- SerDes integration registers (1/2)
- SerDes integration registers (2/2)
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt
listed is required and is the general device interrupt. If the optional
amd,per-channel-interrupt property is specified, then one additional
diff --git a/dts/Bindings/net/brcm,mdio-mux-iproc.txt b/dts/Bindings/net/brcm,mdio-mux-iproc.txt
index dfe287a..b58843f 100644
--- a/dts/Bindings/net/brcm,mdio-mux-iproc.txt
+++ b/dts/Bindings/net/brcm,mdio-mux-iproc.txt
@@ -13,14 +13,17 @@ MDIO multiplexer node:
Every non-ethernet PHY requires a compatible so that it could be probed based
on this compatible string.
+Optional properties:
+- clocks: phandle of the core clock which drives the mdio block.
+
Additional information regarding generic multiplexer properties can be found
at- Documentation/devicetree/bindings/net/mdio-mux.txt
for example:
- mdio_mux_iproc: mdio-mux@6602023c {
+ mdio_mux_iproc: mdio-mux@66020000 {
compatible = "brcm,mdio-mux-iproc";
- reg = <0x6602023c 0x14>;
+ reg = <0x66020000 0x250>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/Bindings/net/btusb.txt b/dts/Bindings/net/btusb.txt
index 9c5e663..37d6792 100644
--- a/dts/Bindings/net/btusb.txt
+++ b/dts/Bindings/net/btusb.txt
@@ -15,7 +15,6 @@ Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
Optional properties:
- - interrupt-parent: phandle of the parent interrupt controller
- interrupt-names: (see below)
- interrupts : The interrupt specified by the name "wakeup" is the interrupt
that shall be used for out-of-band wake-on-bt. Driver will
diff --git a/dts/Bindings/net/can/holt_hi311x.txt b/dts/Bindings/net/can/holt_hi311x.txt
index 23aa94e..903a78d 100644
--- a/dts/Bindings/net/can/holt_hi311x.txt
+++ b/dts/Bindings/net/can/holt_hi311x.txt
@@ -5,7 +5,6 @@ Required properties:
- "holt,hi3110" for HI-3110
- reg: SPI chip select.
- clocks: The clock feeding the CAN controller.
- - interrupt-parent: The parent interrupt controller.
- interrupts: Should contain IRQ line for the CAN controller.
Optional properties:
diff --git a/dts/Bindings/net/can/microchip,mcp251x.txt b/dts/Bindings/net/can/microchip,mcp251x.txt
index ee3723b..188c8bd 100644
--- a/dts/Bindings/net/can/microchip,mcp251x.txt
+++ b/dts/Bindings/net/can/microchip,mcp251x.txt
@@ -6,7 +6,6 @@ Required properties:
- "microchip,mcp2515" for MCP2515.
- reg: SPI chip select.
- clocks: The clock feeding the CAN controller.
- - interrupt-parent: The parent interrupt controller.
- interrupts: Should contain IRQ line for the CAN controller.
Optional properties:
diff --git a/dts/Bindings/net/can/xilinx_can.txt b/dts/Bindings/net/can/xilinx_can.txt
index fe38847..060e2d4 100644
--- a/dts/Bindings/net/can/xilinx_can.txt
+++ b/dts/Bindings/net/can/xilinx_can.txt
@@ -2,20 +2,25 @@ Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings
---------------------------------------------------------
Required properties:
-- compatible : Should be "xlnx,zynq-can-1.0" for Zynq CAN
- controllers and "xlnx,axi-can-1.00.a" for Axi CAN
- controllers.
-- reg : Physical base address and size of the Axi CAN/Zynq
- CANPS registers map.
+- compatible : Should be:
+ - "xlnx,zynq-can-1.0" for Zynq CAN controllers
+ - "xlnx,axi-can-1.00.a" for Axi CAN controllers
+ - "xlnx,canfd-1.0" for CAN FD controllers
+- reg : Physical base address and size of the controller
+ registers map.
- interrupts : Property with a value describing the interrupt
number.
-- interrupt-parent : Must be core interrupt controller
-- clock-names : List of input clock names - "can_clk", "pclk"
- (For CANPS), "can_clk" , "s_axi_aclk"(For AXI CAN)
+- clock-names : List of input clock names
+ - "can_clk", "pclk" (For CANPS),
+ - "can_clk", "s_axi_aclk" (For AXI CAN and CAN FD).
(See clock bindings for details).
- clocks : Clock phandles (see clock bindings for details).
-- tx-fifo-depth : Can Tx fifo depth.
-- rx-fifo-depth : Can Rx fifo depth.
+- tx-fifo-depth : Can Tx fifo depth (Zynq, Axi CAN).
+- rx-fifo-depth : Can Rx fifo depth (Zynq, Axi CAN, CAN FD in
+ sequential Rx mode).
+- tx-mailbox-count : Can Tx mailbox buffer count (CAN FD).
+- rx-mailbox-count : Can Rx mailbox buffer count (CAN FD in mailbox Rx
+ mode).
Example:
@@ -42,3 +47,14 @@ For Axi CAN Dts file:
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
};
+For CAN FD Dts file:
+ canfd_0: canfd@40000000 {
+ compatible = "xlnx,canfd-1.0";
+ clocks = <&clkc 0>, <&clkc 1>;
+ clock-names = "can_clk", "s_axi_aclk";
+ reg = <0x40000000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 59 1>;
+ tx-mailbox-count = <0x20>;
+ rx-fifo-depth = <0x20>;
+ };
diff --git a/dts/Bindings/net/cpsw.txt b/dts/Bindings/net/cpsw.txt
index 4cb4925..4108936 100644
--- a/dts/Bindings/net/cpsw.txt
+++ b/dts/Bindings/net/cpsw.txt
@@ -11,7 +11,6 @@ Required properties:
registers map
- interrupts : property with a value describing the interrupt
number
-- interrupt-parent : The parent interrupt controller
- cpdma_channels : Specifies number of channels in CPDMA
- ale_entries : Specifies No of entries ALE can hold
- bd_ram_size : Specifies internal descriptor RAM size
diff --git a/dts/Bindings/net/davicom-dm9000.txt b/dts/Bindings/net/davicom-dm9000.txt
index 5224bf0..64c159e 100644
--- a/dts/Bindings/net/davicom-dm9000.txt
+++ b/dts/Bindings/net/davicom-dm9000.txt
@@ -5,7 +5,6 @@ Required properties:
- reg : physical addresses and sizes of registers, must contain 2 entries:
first entry : address register,
second entry : data register.
-- interrupt-parent : interrupt controller to which the device is connected
- interrupts : interrupt specifier specific to interrupt controller
Optional properties:
diff --git a/dts/Bindings/net/dsa/b53.txt b/dts/Bindings/net/dsa/b53.txt
index 47a6a7f..1811e19 100644
--- a/dts/Bindings/net/dsa/b53.txt
+++ b/dts/Bindings/net/dsa/b53.txt
@@ -24,6 +24,14 @@ Required properties:
"brcm,bcm53018-srab"
"brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
+ For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of:
+ "brcm,bcm11404-srab"
+ "brcm,bcm11407-srab"
+ "brcm,bcm11409-srab"
+ "brcm,bcm58310-srab"
+ "brcm,bcm58311-srab"
+ "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string
+
For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of:
"brcm,bcm58522-srab"
"brcm,bcm58523-srab"
diff --git a/dts/Bindings/net/dsa/ksz.txt b/dts/Bindings/net/dsa/ksz.txt
index a700943..ac145b8 100644
--- a/dts/Bindings/net/dsa/ksz.txt
+++ b/dts/Bindings/net/dsa/ksz.txt
@@ -4,7 +4,9 @@ Microchip KSZ Series Ethernet switches
Required properties:
- compatible: For external switch chips, compatible string must be exactly one
- of: "microchip,ksz9477"
+ of the following:
+ - "microchip,ksz9477"
+ - "microchip,ksz9897"
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required and optional properties.
diff --git a/dts/Bindings/net/dsa/marvell.txt b/dts/Bindings/net/dsa/marvell.txt
index 60d50a2..feb007a 100644
--- a/dts/Bindings/net/dsa/marvell.txt
+++ b/dts/Bindings/net/dsa/marvell.txt
@@ -30,7 +30,6 @@ Required properties:
Optional properties:
- reset-gpios : Should be a gpio specifier for a reset line
-- interrupt-parent : Parent interrupt controller
- interrupts : Interrupt from the switch
- interrupt-controller : Indicates the switch is itself an interrupt
controller. This is used for the PHY interrupts.
diff --git a/dts/Bindings/net/dsa/realtek-smi.txt b/dts/Bindings/net/dsa/realtek-smi.txt
new file mode 100644
index 0000000..b6ae854
--- /dev/null
+++ b/dts/Bindings/net/dsa/realtek-smi.txt
@@ -0,0 +1,153 @@
+Realtek SMI-based Switches
+==========================
+
+The SMI "Simple Management Interface" is a two-wire protocol using
+bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does
+not use the MDIO protocol. This binding defines how to specify the
+SMI-based Realtek devices.
+
+Required properties:
+
+- compatible: must be exactly one of:
+ "realtek,rtl8366"
+ "realtek,rtl8366rb" (4+1 ports)
+ "realtek,rtl8366s" (4+1 ports)
+ "realtek,rtl8367"
+ "realtek,rtl8367b"
+ "realtek,rtl8368s" (8 port)
+ "realtek,rtl8369"
+ "realtek,rtl8370" (8 port)
+
+Required properties:
+- mdc-gpios: GPIO line for the MDC clock line.
+- mdio-gpios: GPIO line for the MDIO data line.
+- reset-gpios: GPIO line for the reset signal.
+
+Optional properties:
+- realtek,disable-leds: if the LED drivers are not used in the
+ hardware design this will disable them so they are not turned on
+ and wasting power.
+
+Required subnodes:
+
+- interrupt-controller
+
+ This defines an interrupt controller with an IRQ line (typically
+ a GPIO) that will demultiplex and handle the interrupt from the single
+ interrupt line coming out of one of the SMI-based chips. It most
+ importantly provides link up/down interrupts to the PHY blocks inside
+ the ASIC.
+
+Required properties of interrupt-controller:
+
+- interrupt: parent interrupt, see interrupt-controller/interrupts.txt
+- interrupt-controller: see interrupt-controller/interrupts.txt
+- #address-cells: should be <0>
+- #interrupt-cells: should be <1>
+
+- mdio
+
+ This defines the internal MDIO bus of the SMI device, mostly for the
+ purpose of being able to hook the interrupts to the right PHY and
+ the right PHY to the corresponding port.
+
+Required properties of mdio:
+
+- compatible: should be set to "realtek,smi-mdio" for all SMI devices
+
+See net/mdio.txt for additional MDIO bus properties.
+
+See net/dsa/dsa.txt for a list of additional required and optional properties
+and subnodes of DSA switches.
+
+Examples:
+
+switch {
+ compatible = "realtek,rtl8366rb";
+ /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
+ mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+
+ switch_intc: interrupt-controller {
+ /* GPIO 15 provides the interrupt */
+ interrupt-parent = <&gpio0>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ phy-handle = <&phy0>;
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ phy-handle = <&phy1>;
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-handle = <&phy2>;
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ phy-handle = <&phy3>;
+ };
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ phy-handle = <&phy4>;
+ };
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "rgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+
+ mdio {
+ compatible = "realtek,smi-mdio", "dsa-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: phy@0 {
+ reg = <0>;
+ interrupt-parent = <&switch_intc>;
+ interrupts = <0>;
+ };
+ phy1: phy@1 {
+ reg = <1>;
+ interrupt-parent = <&switch_intc>;
+ interrupts = <1>;
+ };
+ phy2: phy@2 {
+ reg = <2>;
+ interrupt-parent = <&switch_intc>;
+ interrupts = <2>;
+ };
+ phy3: phy@3 {
+ reg = <3>;
+ interrupt-parent = <&switch_intc>;
+ interrupts = <3>;
+ };
+ phy4: phy@4 {
+ reg = <4>;
+ interrupt-parent = <&switch_intc>;
+ interrupts = <12>;
+ };
+ };
+};
diff --git a/dts/Bindings/net/dsa/vitesse,vsc73xx.txt b/dts/Bindings/net/dsa/vitesse,vsc73xx.txt
new file mode 100644
index 0000000..ed4710c
--- /dev/null
+++ b/dts/Bindings/net/dsa/vitesse,vsc73xx.txt
@@ -0,0 +1,81 @@
+Vitesse VSC73xx Switches
+========================
+
+This defines device tree bindings for the Vitesse VSC73xx switch chips.
+The Vitesse company has been acquired by Microsemi and Microsemi in turn
+acquired by Microchip but retains this vendor branding.
+
+The currently supported switch chips are:
+Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
+Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
+Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
+Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
+
+The device tree node is an SPI device so it must reside inside a SPI bus
+device tree node, see spi/spi-bus.txt
+
+Required properties:
+
+- compatible: must be exactly one of:
+ "vitesse,vsc7385"
+ "vitesse,vsc7388"
+ "vitesse,vsc7395"
+ "vitesse,vsc7398"
+- gpio-controller: indicates that this switch is also a GPIO controller,
+ see gpio/gpio.txt
+- #gpio-cells: this must be set to <2> and indicates that we are a twocell
+ GPIO controller, see gpio/gpio.txt
+
+Optional properties:
+
+- reset-gpios: a handle to a GPIO line that can issue reset of the chip.
+ It should be tagged as active low.
+
+Required subnodes:
+
+See net/dsa/dsa.txt for a list of additional required and optional properties
+and subnodes of DSA switches.
+
+Examples:
+
+switch@0 {
+ compatible = "vitesse,vsc7395";
+ reg = <0>;
+ /* Specified for 2.5 MHz or below */
+ spi-max-frequency = <2500000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+ vsc: port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac1>;
+ phy-mode = "rgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+};
diff --git a/dts/Bindings/net/dwmac-sun8i.txt b/dts/Bindings/net/dwmac-sun8i.txt
index cfe7243..5bb3a18 100644
--- a/dts/Bindings/net/dwmac-sun8i.txt
+++ b/dts/Bindings/net/dwmac-sun8i.txt
@@ -19,8 +19,6 @@ Required properties:
- reset-names: must be "stmmaceth"
- phy-mode: See ethernet.txt
- phy-handle: See ethernet.txt
-- #address-cells: shall be 1
-- #size-cells: shall be 0
- syscon: A phandle to the device containing the EMAC or GMAC clock register
Optional properties:
@@ -86,8 +84,6 @@ emac: ethernet@1c0b000 {
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
- #address-cells = <1>;
- #size-cells = <0>;
phy-handle = <&int_mii_phy>;
phy-mode = "mii";
@@ -137,8 +133,6 @@ emac: ethernet@1c0b000 {
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
- #address-cells = <1>;
- #size-cells = <0>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
@@ -191,8 +185,6 @@ emac: ethernet@1c0b000 {
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
- #address-cells = <1>;
- #size-cells = <0>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
diff --git a/dts/Bindings/net/fsl-fman.txt b/dts/Bindings/net/fsl-fman.txt
index f8c3389..299c0dc 100644
--- a/dts/Bindings/net/fsl-fman.txt
+++ b/dts/Bindings/net/fsl-fman.txt
@@ -356,30 +356,7 @@ ethernet@e0000 {
============================================================================
FMan IEEE 1588 Node
-DESCRIPTION
-
-The FMan interface to support IEEE 1588
-
-
-PROPERTIES
-
-- compatible
- Usage: required
- Value type: <stringlist>
- Definition: A standard property.
- Must include "fsl,fman-ptp-timer".
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property.
-
-EXAMPLE
-
-ptp-timer@fe000 {
- compatible = "fsl,fman-ptp-timer";
- reg = <0xfe000 0x1000>;
-};
+Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
=============================================================================
FMan MDIO Node
diff --git a/dts/Bindings/net/hisilicon-hns-dsaf.txt b/dts/Bindings/net/hisilicon-hns-dsaf.txt
index abfbeec..8ee4b1c 100644
--- a/dts/Bindings/net/hisilicon-hns-dsaf.txt
+++ b/dts/Bindings/net/hisilicon-hns-dsaf.txt
@@ -9,7 +9,6 @@ Required properties:
"6port-16rss",
"6port-16vf",
"single-port".
-- interrupt-parent: the interrupt parent of this device.
- interrupts: should contain the DSA Fabric and rcb interrupt.
- reg: specifies base physical address(es) and size of the device registers.
The first region is external interface control register base and size(optional,
diff --git a/dts/Bindings/net/ibm,emac.txt b/dts/Bindings/net/ibm,emac.txt
index 44b842b..c0c14aa 100644
--- a/dts/Bindings/net/ibm,emac.txt
+++ b/dts/Bindings/net/ibm,emac.txt
@@ -18,7 +18,6 @@
"ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
"ibm,emac4"
- interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
- - interrupt-parent : optional, if needed for interrupt mapping
- reg : <registers mapping>
- local-mac-address : 6 bytes, MAC address
- mal-device : phandle of the associated McMAL node
diff --git a/dts/Bindings/net/marvell-bt-8xxx.txt b/dts/Bindings/net/marvell-bt-8xxx.txt
index 3d27c68..957e5e5 100644
--- a/dts/Bindings/net/marvell-bt-8xxx.txt
+++ b/dts/Bindings/net/marvell-bt-8xxx.txt
@@ -22,7 +22,6 @@ Optional properties:
- marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host
platform. The value will be configured to firmware. This
is needed to work chip's sleep feature as expected (u16).
- - interrupt-parent: phandle of the parent interrupt controller
- interrupt-names: Used only for USB based devices (See below)
- interrupts : specifies the interrupt pin number to the cpu. For SDIO, the
driver will use the first interrupt specified in the interrupt
diff --git a/dts/Bindings/net/mediatek,mt7620-gsw.txt b/dts/Bindings/net/mediatek,mt7620-gsw.txt
index aa63130..358fed2 100644
--- a/dts/Bindings/net/mediatek,mt7620-gsw.txt
+++ b/dts/Bindings/net/mediatek,mt7620-gsw.txt
@@ -6,8 +6,6 @@ The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
Required properties:
- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the gigabit switches interrupt
- resets: Should contain the gigabit switches resets
- reset-names: Should contain the reset names "gsw"
diff --git a/dts/Bindings/net/mediatek-bluetooth.txt b/dts/Bindings/net/mediatek-bluetooth.txt
new file mode 100644
index 0000000..14ceb2a
--- /dev/null
+++ b/dts/Bindings/net/mediatek-bluetooth.txt
@@ -0,0 +1,35 @@
+MediaTek SoC built-in Bluetooth Devices
+==================================
+
+This device is a serial attached device to BTIF device and thus it must be a
+child node of the serial node with BTIF. The dt-bindings details for BTIF
+device can be known via Documentation/devicetree/bindings/serial/8250.txt.
+
+Required properties:
+
+- compatible: Must be
+ "mediatek,mt7622-bluetooth": for MT7622 SoC
+- clocks: Should be the clock specifiers corresponding to the entry in
+ clock-names property.
+- clock-names: Should contain "ref" entries.
+- power-domains: Phandle to the power domain that the device is part of
+
+Example:
+
+ btif: serial@1100c000 {
+ compatible = "mediatek,mt7622-btif",
+ "mediatek,mtk-btif";
+ reg = <0 0x1100c000 0 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_BTIF_PD>;
+ clock-names = "main";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+
+ bluetooth {
+ compatible = "mediatek,mt7622-bluetooth";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+ clocks = <&clk25m>;
+ clock-names = "ref";
+ };
+ };
diff --git a/dts/Bindings/net/mediatek-net.txt b/dts/Bindings/net/mediatek-net.txt
index 53c13ee..503f2b9 100644
--- a/dts/Bindings/net/mediatek-net.txt
+++ b/dts/Bindings/net/mediatek-net.txt
@@ -30,9 +30,6 @@ Required properties:
- mediatek,pctl: phandle to the syscon node that handles the ports slew rate
and driver current: only for MT2701 and MT7623 SoC
-Optional properties:
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
* Ethernet MAC node
Required properties:
diff --git a/dts/Bindings/net/microchip,enc28j60.txt b/dts/Bindings/net/microchip,enc28j60.txt
index 44dff53..24626e0 100644
--- a/dts/Bindings/net/microchip,enc28j60.txt
+++ b/dts/Bindings/net/microchip,enc28j60.txt
@@ -8,9 +8,6 @@ the SPI master node.
Required properties:
- compatible: Should be "microchip,enc28j60"
- reg: Specify the SPI chip select the ENC28J60 is wired to
-- interrupt-parent: Specify the phandle of the source interrupt, see interrupt
- binding documentation for details. Usually this is the GPIO bank
- the interrupt line is wired to.
- interrupts: Specify the interrupt index within the interrupt controller (referred
to above in interrupt-parent) and interrupt type. The ENC28J60 natively
generates falling edge interrupts, however, additional board logic
diff --git a/dts/Bindings/net/nfc/nxp-nci.txt b/dts/Bindings/net/nfc/nxp-nci.txt
index 9248673..cfaf889 100644
--- a/dts/Bindings/net/nfc/nxp-nci.txt
+++ b/dts/Bindings/net/nfc/nxp-nci.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible: Should be "nxp,nxp-nci-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- enable-gpios: Output GPIO pin used for enabling/disabling the chip
- firmware-gpios: Output GPIO pin used to enter firmware download mode
diff --git a/dts/Bindings/net/nfc/pn533-i2c.txt b/dts/Bindings/net/nfc/pn533-i2c.txt
index 122460e..2efe388 100644
--- a/dts/Bindings/net/nfc/pn533-i2c.txt
+++ b/dts/Bindings/net/nfc/pn533-i2c.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible: Should be "nxp,pn532-i2c" or "nxp,pn533-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
Optional SoC Specific Properties:
diff --git a/dts/Bindings/net/nfc/pn544.txt b/dts/Bindings/net/nfc/pn544.txt
index 538a86f..92f399e 100644
--- a/dts/Bindings/net/nfc/pn544.txt
+++ b/dts/Bindings/net/nfc/pn544.txt
@@ -2,9 +2,8 @@
Required properties:
- compatible: Should be "nxp,pn544-i2c".
-- clock-frequency: IC work frequency.
+- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- enable-gpios: Output GPIO pin used for enabling/disabling the PN544
- firmware-gpios: Output GPIO pin used to enter firmware download mode
diff --git a/dts/Bindings/net/nfc/s3fwrn5.txt b/dts/Bindings/net/nfc/s3fwrn5.txt
index ed5b3ea..f02f6fb 100644
--- a/dts/Bindings/net/nfc/s3fwrn5.txt
+++ b/dts/Bindings/net/nfc/s3fwrn5.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: Should be "samsung,s3fwrn5-i2c".
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
diff --git a/dts/Bindings/net/nfc/st-nci-i2c.txt b/dts/Bindings/net/nfc/st-nci-i2c.txt
index b46d473..baa8f81 100644
--- a/dts/Bindings/net/nfc/st-nci-i2c.txt
+++ b/dts/Bindings/net/nfc/st-nci-i2c.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible: Should be "st,st21nfcb-i2c" or "st,st21nfcc-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- reset-gpios: Output GPIO pin used to reset the ST21NFCB
diff --git a/dts/Bindings/net/nfc/st-nci-spi.txt b/dts/Bindings/net/nfc/st-nci-spi.txt
index 54ce8e7..d333433 100644
--- a/dts/Bindings/net/nfc/st-nci-spi.txt
+++ b/dts/Bindings/net/nfc/st-nci-spi.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: Should be "st,st21nfcb-spi"
- spi-max-frequency: Maximum SPI frequency (<= 4000000).
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- reset-gpios: Output GPIO pin used to reset the ST21NFCB
diff --git a/dts/Bindings/net/nfc/st21nfca.txt b/dts/Bindings/net/nfc/st21nfca.txt
index 5ee9440..b8bd90f 100644
--- a/dts/Bindings/net/nfc/st21nfca.txt
+++ b/dts/Bindings/net/nfc/st21nfca.txt
@@ -4,8 +4,6 @@ Required properties:
- compatible: Should be "st,st21nfca-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
-- interrupts: GPIO interrupt to which the chip is connected
- enable-gpios: Output GPIO pin used for enabling/disabling the ST21NFCA
Optional SoC Specific Properties:
diff --git a/dts/Bindings/net/nfc/st95hf.txt b/dts/Bindings/net/nfc/st95hf.txt
index 08a202e..3f373a1 100644
--- a/dts/Bindings/net/nfc/st95hf.txt
+++ b/dts/Bindings/net/nfc/st95hf.txt
@@ -17,9 +17,6 @@ Required properties:
- enable-gpio: GPIO line to enable ST95HF transceiver.
-- interrupt-parent : Standard way to specify the controller to which
- ST95HF transceiver's interrupt is routed.
-
- interrupts : Standard way to define ST95HF transceiver's out
interrupt.
diff --git a/dts/Bindings/net/nfc/trf7970a.txt b/dts/Bindings/net/nfc/trf7970a.txt
index 5ca9362..ba1934b 100644
--- a/dts/Bindings/net/nfc/trf7970a.txt
+++ b/dts/Bindings/net/nfc/trf7970a.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: Should be "ti,trf7970a".
- spi-max-frequency: Maximum SPI frequency (<= 2000000).
-- interrupt-parent: phandle of parent interrupt handler.
- interrupts: A single interrupt specifier.
- ti,enable-gpios: One or two GPIO entries used for 'EN' and 'EN2' pins on the
TRF7970A. EN2 is optional.
diff --git a/dts/Bindings/net/phy.txt b/dts/Bindings/net/phy.txt
index d2169a5..17c1d2b 100644
--- a/dts/Bindings/net/phy.txt
+++ b/dts/Bindings/net/phy.txt
@@ -3,8 +3,6 @@ PHY nodes
Required properties:
- interrupts : interrupt specifier for the sole interrupt.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- reg : The ID number for the phy, usually a small integer
Optional Properties:
diff --git a/dts/Bindings/net/qca,qca7000.txt b/dts/Bindings/net/qca,qca7000.txt
index 3987846..e4a8a51 100644
--- a/dts/Bindings/net/qca,qca7000.txt
+++ b/dts/Bindings/net/qca,qca7000.txt
@@ -19,7 +19,6 @@ Required properties:
- spi-cpol : Must be set
Optional properties:
-- interrupt-parent : Specify the pHandle of the source interrupt
- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at.
Numbers smaller than 1000000 or greater than 16000000
are invalid. Missing the property will set the SPI
diff --git a/dts/Bindings/net/qualcomm-bluetooth.txt b/dts/Bindings/net/qualcomm-bluetooth.txt
index 0ea18a5..824c0e2 100644
--- a/dts/Bindings/net/qualcomm-bluetooth.txt
+++ b/dts/Bindings/net/qualcomm-bluetooth.txt
@@ -10,12 +10,25 @@ device the slave device is attached to.
Required properties:
- compatible: should contain one of the following:
* "qcom,qca6174-bt"
+ * "qcom,wcn3990-bt"
+
+Optional properties for compatible string qcom,qca6174-bt:
-Optional properties:
- enable-gpios: gpio specifier used to enable chip
- clocks: clock provided to the controller (SUSCLK_32KHZ)
-Example:
+Required properties for compatible string qcom,wcn3990-bt:
+
+ - vddio-supply: VDD_IO supply regulator handle.
+ - vddxo-supply: VDD_XO supply regulator handle.
+ - vddrf-supply: VDD_RF supply regulator handle.
+ - vddch0-supply: VDD_CH0 supply regulator handle.
+
+Optional properties for compatible string qcom,wcn3990-bt:
+
+ - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
+
+Examples:
serial@7570000 {
label = "BT-UART";
@@ -28,3 +41,15 @@ serial@7570000 {
clocks = <&divclk4>;
};
};
+
+serial@898000 {
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ };
+};
diff --git a/dts/Bindings/net/ralink,rt2880-net.txt b/dts/Bindings/net/ralink,rt2880-net.txt
index 88b095d..9fe1a0a 100644
--- a/dts/Bindings/net/ralink,rt2880-net.txt
+++ b/dts/Bindings/net/ralink,rt2880-net.txt
@@ -14,8 +14,6 @@ Required properties:
"ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
"mediatek,mt7620-eth", "mediatek,mt7621-eth"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the frame engines interrupt
- resets: Should contain the frame engines resets
- reset-names: Should contain the reset names "fe". If a switch is present
diff --git a/dts/Bindings/net/ralink,rt3050-esw.txt b/dts/Bindings/net/ralink,rt3050-esw.txt
index 2e79bd3..87e3158 100644
--- a/dts/Bindings/net/ralink,rt3050-esw.txt
+++ b/dts/Bindings/net/ralink,rt3050-esw.txt
@@ -7,8 +7,6 @@ SoCs (RT3x5x, RT5350, MT76x8).
Required properties:
- compatible: Should be "ralink,rt3050-esw"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the embedded switches interrupt
- resets: Should contain the embedded switches resets
- reset-names: Should contain the reset names "esw"
diff --git a/dts/Bindings/net/renesas,ravb.txt b/dts/Bindings/net/renesas,ravb.txt
index fac897d..da249b7 100644
--- a/dts/Bindings/net/renesas,ravb.txt
+++ b/dts/Bindings/net/renesas,ravb.txt
@@ -16,6 +16,7 @@ Required properties:
- "renesas,etheravb-rcar-gen2" as a fallback for the above
R-Car Gen2 and RZ/G1 devices.
+ - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC.
- "renesas,etheravb-r8a7795" for the R8A7795 SoC.
- "renesas,etheravb-r8a7796" for the R8A7796 SoC.
- "renesas,etheravb-r8a77965" for the R8A77965 SoC.
@@ -24,7 +25,7 @@ Required properties:
- "renesas,etheravb-r8a77990" for the R8A77990 SoC.
- "renesas,etheravb-r8a77995" for the R8A77995 SoC.
- "renesas,etheravb-rcar-gen3" as a fallback for the above
- R-Car Gen3 devices.
+ R-Car Gen3 and RZ/G2 devices.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first followed by
@@ -47,8 +48,6 @@ Required properties:
- pinctrl-0: phandle, referring to a default pin configuration node.
Optional properties:
-- interrupt-parent: the phandle for the interrupt controller that services
- interrupts for this device.
- interrupt-names: A list of interrupt names.
For the R-Car Gen 3 SoCs this property is mandatory;
it should include one entry per channel, named "ch%u",
diff --git a/dts/Bindings/net/rockchip-dwmac.txt b/dts/Bindings/net/rockchip-dwmac.txt
index 9c16ee2..3b71da7 100644
--- a/dts/Bindings/net/rockchip-dwmac.txt
+++ b/dts/Bindings/net/rockchip-dwmac.txt
@@ -4,6 +4,7 @@ The device node has following properties.
Required properties:
- compatible: should be "rockchip,<name>-gamc"
+ "rockchip,px30-gmac": found on PX30 SoCs
"rockchip,rk3128-gmac": found on RK312x SoCs
"rockchip,rk3228-gmac": found on RK322x SoCs
"rockchip,rk3288-gmac": found on RK3288 SoCs
diff --git a/dts/Bindings/net/samsung-sxgbe.txt b/dts/Bindings/net/samsung-sxgbe.txt
index 888c250..46e5911 100644
--- a/dts/Bindings/net/samsung-sxgbe.txt
+++ b/dts/Bindings/net/samsung-sxgbe.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: Should be "samsung,sxgbe-v2.0a"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the SXGBE interrupts
These interrupts are ordered by fixed and follows variable
trasmit DMA interrupts, receive DMA interrupts and lpi interrupt.
diff --git a/dts/Bindings/net/sh_eth.txt b/dts/Bindings/net/sh_eth.txt
index 82a4cf2c..76db9f1 100644
--- a/dts/Bindings/net/sh_eth.txt
+++ b/dts/Bindings/net/sh_eth.txt
@@ -35,8 +35,6 @@ Required properties:
- pinctrl-0: phandle, referring to a default pin configuration node.
Optional properties:
-- interrupt-parent: the phandle for the interrupt controller that services
- interrupts for this device.
- pinctrl-names: pin configuration state name ("default").
- renesas,no-ether-link: boolean, specify when a board does not provide a proper
Ether LINK signal.
diff --git a/dts/Bindings/net/snps,dwc-qos-ethernet.txt b/dts/Bindings/net/snps,dwc-qos-ethernet.txt
index 21d27aa..36f1aef 100644
--- a/dts/Bindings/net/snps,dwc-qos-ethernet.txt
+++ b/dts/Bindings/net/snps,dwc-qos-ethernet.txt
@@ -83,8 +83,6 @@ Required properties:
- "snps,dwc-qos-ethernet-4.10" (deprecated):
- "phy_ref_clk"
- "apb_clk"
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the core's combined interrupt signal
- phy-mode: See ethernet.txt file in the same directory
- resets: Phandle and reset specifiers for each entry in reset-names, in the
diff --git a/dts/Bindings/net/stmmac.txt b/dts/Bindings/net/stmmac.txt
index 3a28a5d..cb69406 100644
--- a/dts/Bindings/net/stmmac.txt
+++ b/dts/Bindings/net/stmmac.txt
@@ -1,11 +1,10 @@
-* STMicroelectronics 10/100/1000 Ethernet driver (GMAC)
+* STMicroelectronics 10/100/1000/2500/10000 Ethernet (GMAC/XGMAC)
Required properties:
-- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac"
+- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" or
+ "snps,dwxgmac-<ip_version>", "snps,dwxgmac".
For backwards compatibility: "st,spear600-gmac" is also supported.
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the STMMAC interrupts
- interrupt-names: Should contain a list of interrupt names corresponding to
the interrupts in the interrupts property, if available.
diff --git a/dts/Bindings/net/wireless/brcm,bcm43xx-fmac.txt b/dts/Bindings/net/wireless/brcm,bcm43xx-fmac.txt
index 86602f2..cffb2d6 100644
--- a/dts/Bindings/net/wireless/brcm,bcm43xx-fmac.txt
+++ b/dts/Bindings/net/wireless/brcm,bcm43xx-fmac.txt
@@ -11,8 +11,6 @@ Required properties:
Optional properties:
- brcm,drive-strength : drive strength used for SDIO pins on device in mA
(default = 6).
- - interrupt-parent : the phandle for the interrupt controller to which the
- device interrupts are connected.
- interrupts : specifies attributes for the out-of-band interrupt (host-wake).
When not specified the device will use in-band SDIO interrupts.
- interrupt-names : name of the out-of-band interrupt, which must be set
diff --git a/dts/Bindings/net/wireless/marvell-8xxx.txt b/dts/Bindings/net/wireless/marvell-8xxx.txt
index 59de864..9bf9bba 100644
--- a/dts/Bindings/net/wireless/marvell-8xxx.txt
+++ b/dts/Bindings/net/wireless/marvell-8xxx.txt
@@ -29,7 +29,6 @@ Optional properties:
- marvell,wakeup-pin : a wakeup pin number of wifi chip which will be configured
to firmware. Firmware will wakeup the host using this pin
during suspend/resume.
- - interrupt-parent: phandle of the parent interrupt controller
- interrupts : interrupt pin number to the cpu. driver will request an irq based on
this interrupt number. during system suspend, the irq will be enabled
so that the wifi chip can wakeup host platform under certain condition.
diff --git a/dts/Bindings/net/wireless/ti,wl1251.txt b/dts/Bindings/net/wireless/ti,wl1251.txt
index 189ae5c..bb2fcde 100644
--- a/dts/Bindings/net/wireless/ti,wl1251.txt
+++ b/dts/Bindings/net/wireless/ti,wl1251.txt
@@ -8,8 +8,6 @@ Required properties:
- reg : Chip select address of device
- spi-max-frequency : Maximum SPI clocking speed of device in Hz
- interrupts : Should contain interrupt line
-- interrupt-parent : Should be the phandle for the interrupt controller
- that services interrupts for this device
- vio-supply : phandle to regulator providing VIO
- ti,power-gpio : GPIO connected to chip's PMEN pin
diff --git a/dts/Bindings/net/wireless/ti,wlcore,spi.txt b/dts/Bindings/net/wireless/ti,wlcore,spi.txt
index 8f9ced0..cb5c9e1 100644
--- a/dts/Bindings/net/wireless/ti,wlcore,spi.txt
+++ b/dts/Bindings/net/wireless/ti,wlcore,spi.txt
@@ -17,9 +17,7 @@ Required properties:
* "ti,wl1837"
- reg : Chip select address of device
- spi-max-frequency : Maximum SPI clocking speed of device in Hz
-- interrupt-parent, interrupts :
- Should contain parameters for 1 interrupt line.
- Interrupt parameters: parent, line number, type.
+- interrupts : Should contain parameters for 1 interrupt line.
- vwlan-supply : Point the node of the regulator that powers/enable the
wl12xx/wl18xx chip
diff --git a/dts/Bindings/net/wireless/ti,wlcore.txt b/dts/Bindings/net/wireless/ti,wlcore.txt
index f42f6b0..9306c4d 100644
--- a/dts/Bindings/net/wireless/ti,wlcore.txt
+++ b/dts/Bindings/net/wireless/ti,wlcore.txt
@@ -20,8 +20,6 @@ Required properties:
- interrupts : specifies attributes for the out-of-band interrupt.
Optional properties:
- - interrupt-parent : the phandle for the interrupt controller to which the
- device interrupts are connected.
- ref-clock-frequency : ref clock frequency in Hz
- tcxo-clock-frequency : tcxo clock frequency in Hz