dts: update to v4.1-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

13 files changed, 143 insertions, 14 deletions

diff --git a/dts/Bindings/net/apm-xgene-enet.txt b/dts/Bindings/net/apm-xgene-enet.txt
index 6151999c5d..f55aa280d3 100644
--- a/dts/Bindings/net/apm-xgene-enet.txt
+++ b/dts/Bindings/net/apm-xgene-enet.txt
@@ -14,7 +14,11 @@ Required properties for all the ethernet interfaces:
   - "enet_csr": Ethernet control and status register address space
   - "ring_csr": Descriptor ring control and status register address space
   - "ring_cmd": Descriptor ring command register address space
-- interrupts: Ethernet main interrupt
+- interrupts: Two interrupt specifiers can be specified.
+  - First is the Rx interrupt.  This irq is mandatory.
+  - Second is the Tx completion interrupt.
+    This is supported only on SGMII based 1GbE and 10GbE interfaces.
+- port-id: Port number (0 or 1)
 - clocks: Reference to the clock entry.
 - local-mac-address: MAC address assigned to this device
 - phy-connection-type: Interface type between ethernet device and PHY device
@@ -49,6 +53,7 @@ Example:
 		      <0x0 0X10000000 0x0 0X200>;
 		reg-names = "enet_csr", "ring_csr", "ring_cmd";
 		interrupts = <0x0 0x3c 0x4>;
+		port-id = <0>;
 		clocks = <&menetclk 0>;
 		local-mac-address = [00 01 73 00 00 01];
 		phy-connection-type = "rgmii";
diff --git a/dts/Bindings/net/broadcom-sf2.txt b/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt
index 30d487597e..30d487597e 100644
--- a/dts/Bindings/net/broadcom-sf2.txt
+++ b/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt
diff --git a/dts/Bindings/net/broadcom-bcmgenet.txt b/dts/Bindings/net/brcm,bcmgenet.txt
index 451fef26b4..451fef26b4 100644
--- a/dts/Bindings/net/broadcom-bcmgenet.txt
+++ b/dts/Bindings/net/brcm,bcmgenet.txt
diff --git a/dts/Bindings/net/broadcom-systemport.txt b/dts/Bindings/net/brcm,systemport.txt
index 877da34145..877da34145 100644
--- a/dts/Bindings/net/broadcom-systemport.txt
+++ b/dts/Bindings/net/brcm,systemport.txt
diff --git a/dts/Bindings/net/broadcom-mdio-unimac.txt b/dts/Bindings/net/brcm,unimac-mdio.txt
index ab0bb4247d..ab0bb4247d 100644
--- a/dts/Bindings/net/broadcom-mdio-unimac.txt
+++ b/dts/Bindings/net/brcm,unimac-mdio.txt
diff --git a/dts/Bindings/net/ethernet.txt b/dts/Bindings/net/ethernet.txt
index 3fc360523b..41b3f3f864 100644
--- a/dts/Bindings/net/ethernet.txt
+++ b/dts/Bindings/net/ethernet.txt
@@ -19,6 +19,12 @@ The following properties are common to the Ethernet controllers:
 - phy: the same as "phy-handle" property, not recommended for new bindings.
 - phy-device: the same as "phy-handle" property, not recommended for new
   bindings.
+- rx-fifo-depth: the size of the controller's receive fifo in bytes. This
+  is used for components that can have configurable receive fifo sizes,
+  and is useful for determining certain configuration settings such as
+  flow control thresholds.
+- tx-fifo-depth: the size of the controller's transmit fifo in bytes. This
+  is used for components that can have configurable fifo sizes.
 
 Child nodes of the Ethernet controller are typically the individual PHY devices
 connected via the MDIO bus (sometimes the MDIO bus controller is separate).
diff --git a/dts/Bindings/net/ieee802154/at86rf230.txt b/dts/Bindings/net/ieee802154/at86rf230.txt
index d3bbdded4c..168f1be509 100644
--- a/dts/Bindings/net/ieee802154/at86rf230.txt
+++ b/dts/Bindings/net/ieee802154/at86rf230.txt
@@ -6,11 +6,14 @@ Required properties:
   - spi-max-frequency:	maximal bus speed, should be set to 7500000 depends
 			sync or async operation mode
   - reg:		the chipselect index
-  - interrupts:		the interrupt generated by the device
+  - interrupts:		the interrupt generated by the device. Non high-level
+			can occur deadlocks while handling isr.
 
 Optional properties:
   - reset-gpio:		GPIO spec for the rstn pin
   - sleep-gpio:		GPIO spec for the slp_tr pin
+  - xtal-trim:		u8 value for fine tuning the internal capacitance
+			arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF
 
 Example:
 
@@ -18,6 +21,7 @@ Example:
 		compatible = "atmel,at86rf231";
 		spi-max-frequency = <7500000>;
 		reg = <0>;
-		interrupts = <19 1>;
+		interrupts = <19 4>;
 		interrupt-parent = <&gpio3>;
+		xtal-trim = /bits/ 8 <0x06>;
 	};
diff --git a/dts/Bindings/net/ieee802154/cc2520.txt b/dts/Bindings/net/ieee802154/cc2520.txt
index 0071883c08..fb6d49f184 100644
--- a/dts/Bindings/net/ieee802154/cc2520.txt
+++ b/dts/Bindings/net/ieee802154/cc2520.txt
@@ -13,11 +13,15 @@ Required properties:
 	- cca-gpio:		GPIO spec for the CCA pin
 	- vreg-gpio:		GPIO spec for the VREG pin
 	- reset-gpio:		GPIO spec for the RESET pin
+Optional properties:
+	- amplified:		include if the CC2520 is connected to a CC2591 amplifier
+
 Example:
 	cc2520@0 {
 		compatible = "ti,cc2520";
 		reg = <0>;
 		spi-max-frequency = <4000000>;
+		amplified;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cc2520_cape_pins>;
 		fifo-gpio = <&gpio1 18 0>;
diff --git a/dts/Bindings/net/keystone-netcp.txt b/dts/Bindings/net/keystone-netcp.txt
index f9c0771047..d0e6fa38f3 100644
--- a/dts/Bindings/net/keystone-netcp.txt
+++ b/dts/Bindings/net/keystone-netcp.txt
@@ -49,6 +49,7 @@ Required properties:
 - compatible:	Should be "ti,netcp-1.0"
 - clocks:	phandle to the reference clocks for the subsystem.
 - dma-id:	Navigator packet dma instance id.
+- ranges:	address range of NetCP (includes, Ethernet SS, PA and SA)
 
 Optional properties:
 - reg:		register location and the size for the following register
@@ -64,10 +65,30 @@ NetCP device properties: Device specification for NetCP sub-modules.
 1Gb/10Gb (gbe/xgbe) ethernet switch sub-module specifications.
 Required properties:
 - label:	Must be "netcp-gbe" for 1Gb & "netcp-xgbe" for 10Gb.
+- compatible:	Must be one of below:-
+		"ti,netcp-gbe" for 1GbE on NetCP 1.4
+		"ti,netcp-gbe-5" for 1GbE N NetCP 1.5 (N=5)
+		"ti,netcp-gbe-9" for 1GbE N NetCP 1.5 (N=9)
+		"ti,netcp-gbe-2" for 1GbE N NetCP 1.5 (N=2)
+		"ti,netcp-xgbe" for 10 GbE
+
 - reg:		register location and the size for the following register
 		regions in the specified order.
-		- subsystem registers
-		- serdes registers
+		- switch subsystem registers
+		- sgmii port3/4 module registers (only for NetCP 1.4)
+		- switch module registers
+		- serdes registers (only for 10G)
+
+		NetCP 1.4 ethss, here is the order
+			index #0 - switch subsystem registers
+			index #1 - sgmii port3/4 module registers
+			index #2 - switch module registers
+
+		NetCP 1.5 ethss 9 port, 5 port and 2 port
+			index #0 - switch subsystem registers
+			index #1 - switch module registers
+			index #2 - serdes registers
+
 - tx-channel:	the navigator packet dma channel name for tx.
 - tx-queue:	the navigator queue number associated with the tx dma channel.
 - interfaces:	specification for each of the switch port to be registered as a
@@ -120,14 +141,13 @@ Optional properties:
 
 Example binding:
 
-netcp: netcp@2090000 {
+netcp: netcp@2000000 {
 	reg = <0x2620110 0x8>;
 	reg-names = "efuse";
 	compatible = "ti,netcp-1.0";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	ranges;
-
+	ranges  = <0 0x2000000 0xfffff>;
 	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
 	dma-coherent;
 	/* big-endian; */
@@ -137,9 +157,9 @@ netcp: netcp@2090000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		gbe@0x2090000 {
+		gbe@90000 {
 			label = "netcp-gbe";
-			reg = <0x2090000 0xf00>;
+			reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>;
 			/* enable-ale; */
 			tx-queue = <648>;
 			tx-channel = <8>;
diff --git a/dts/Bindings/net/macb.txt b/dts/Bindings/net/macb.txt
index aaa696414f..ba19d671e8 100644
--- a/dts/Bindings/net/macb.txt
+++ b/dts/Bindings/net/macb.txt
@@ -2,10 +2,13 @@
 
 Required properties:
 - compatible: Should be "cdns,[<chip>-]{macb|gem}"
-  Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs.
+  Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
+  available on sama5d3 SoCs.
   Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
   Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
   the Cadence GEM, or the generic form: "cdns,gem".
+  Use "cdns,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
+  Use "cdns,sama5d4-gem" for the Gigabit IP available on Atmel sama5d4 SoCs.
 - reg: Address and length of the register set for the device
 - interrupts: Should contain macb interrupt
 - phy-mode: See ethernet.txt file in the same directory.
diff --git a/dts/Bindings/net/nfc/nxp-nci.txt b/dts/Bindings/net/nfc/nxp-nci.txt
new file mode 100644
index 0000000000..5b6cd9b3f6
--- /dev/null
+++ b/dts/Bindings/net/nfc/nxp-nci.txt
@@ -0,0 +1,35 @@
+* NXP Semiconductors NXP NCI NFC Controllers
+
+Required properties:
+- compatible: Should be "nxp,nxp-nci-i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- enable-gpios: Output GPIO pin used for enabling/disabling the chip
+- firmware-gpios: Output GPIO pin used to enter firmware download mode
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):
+
+&i2c2 {
+
+	status = "okay";
+
+	npc100: npc100@29 {
+
+		compatible = "nxp,nxp-nci-i2c";
+
+		reg = <0x29>;
+		clock-frequency = <100000>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <29 GPIO_ACTIVE_HIGH>;
+
+		enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/dts/Bindings/net/stmmac.txt b/dts/Bindings/net/stmmac.txt
index 8ca65cec52..f34fc3c81a 100644
--- a/dts/Bindings/net/stmmac.txt
+++ b/dts/Bindings/net/stmmac.txt
@@ -35,15 +35,18 @@ Optional properties:
 - reset-names: Should contain the reset signal name "stmmaceth", if a
 	reset phandle is given
 - max-frame-size: See ethernet.txt file in the same directory
-- clocks: If present, the first clock should be the GMAC main clock,
-  further clocks may be specified in derived bindings.
+- clocks: If present, the first clock should be the GMAC main clock and
+  the second clock should be peripheral's register interface clock. Further
+  clocks may be specified in derived bindings.
 - clock-names: One name for each entry in the clocks property, the
-  first one should be "stmmaceth".
+  first one should be "stmmaceth" and the second one should be "pclk".
 - clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
   available this clock is used for programming the Timestamp Addend Register.
   If not passed then the system clock will be used and this is fine on some
   platforms.
 - snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register.
+- tx-fifo-depth: See ethernet.txt file in the same directory
+- rx-fifo-depth: See ethernet.txt file in the same directory
 
 Examples:
 
@@ -58,6 +61,8 @@ Examples:
 		phy-mode = "gmii";
 		snps,multicast-filter-bins = <256>;
 		snps,perfect-filter-entries = <128>;
+		rx-fifo-depth = <16384>;
+		tx-fifo-depth = <16384>;
 		clocks = <&clock>;
 		clock-names = "stmmaceth";
 	};
diff --git a/dts/Bindings/net/wireless/ti,wlcore.txt b/dts/Bindings/net/wireless/ti,wlcore.txt
new file mode 100644
index 0000000000..2a3d90de18
--- /dev/null
+++ b/dts/Bindings/net/wireless/ti,wlcore.txt
@@ -0,0 +1,47 @@
+TI Wilink 6/7/8 (wl12xx/wl18xx) SDIO devices
+
+This node provides properties for controlling the wilink wireless device. The
+node is expected to be specified as a child node to the SDIO controller that
+connects the device to the system.
+
+Required properties:
+ - compatible: should be one of the following:
+    * "ti,wl1271"
+    * "ti,wl1273"
+    * "ti,wl1281"
+    * "ti,wl1283"
+    * "ti,wl1801"
+    * "ti,wl1805"
+    * "ti,wl1807"
+    * "ti,wl1831"
+    * "ti,wl1835"
+    * "ti,wl1837"
+ - interrupts : specifies attributes for the out-of-band interrupt.
+
+Optional properties:
+ - interrupt-parent : the phandle for the interrupt controller to which the
+	device interrupts are connected.
+ - ref-clock-frequency : ref clock frequency in Hz
+ - tcxo-clock-frequency : tcxo clock frequency in Hz
+
+Note: the *-clock-frequency properties assume internal clocks. In case of external
+clock, new bindings (for parsing the clock nodes) have to be added.
+
+Example:
+
+&mmc3 {
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};