diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2022-04-12 10:22:48 +0200 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2022-04-14 09:33:28 +0200 |
commit | 4eefe44b3dea5b8eb778938e8f75c339ac5119fc (patch) | |
tree | e276f325faaba1098645b90d0358a73aec83cd39 /dts/Bindings/net | |
parent | b01786baa849369ff2345c51e63857c952a01130 (diff) | |
download | barebox-4eefe44b3dea5b8eb778938e8f75c339ac5119fc.tar.gz barebox-4eefe44b3dea5b8eb778938e8f75c339ac5119fc.tar.xz |
dts: update to v5.18-rc2
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/net')
-rw-r--r-- | dts/Bindings/net/ethernet-controller.yaml | 6 | ||||
-rw-r--r-- | dts/Bindings/net/micrel.txt | 17 | ||||
-rw-r--r-- | dts/Bindings/net/xilinx_axienet.txt | 8 |
3 files changed, 13 insertions, 18 deletions
diff --git a/dts/Bindings/net/ethernet-controller.yaml b/dts/Bindings/net/ethernet-controller.yaml index 817794e562..4f15463611 100644 --- a/dts/Bindings/net/ethernet-controller.yaml +++ b/dts/Bindings/net/ethernet-controller.yaml @@ -106,6 +106,12 @@ properties: phy-mode: $ref: "#/properties/phy-connection-type" + pcs-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Specifies a reference to a node representing a PCS PHY device on a MDIO + bus to link with an external PHY (phy-handle) if exists. + phy-handle: $ref: /schemas/types.yaml#/definitions/phandle description: diff --git a/dts/Bindings/net/micrel.txt b/dts/Bindings/net/micrel.txt index c5ab62c391..8d157f0295 100644 --- a/dts/Bindings/net/micrel.txt +++ b/dts/Bindings/net/micrel.txt @@ -45,20 +45,3 @@ Optional properties: In fiber mode, auto-negotiation is disabled and the PHY can only work in 100base-fx (full and half duplex) modes. - - - lan8814,ignore-ts: If present the PHY will not support timestamping. - - This option acts as check whether Timestamping is supported by - hardware or not. LAN8814 phy support hardware tmestamping. - - - lan8814,latency_rx_10: Configures Latency value of phy in ingress at 10 Mbps. - - - lan8814,latency_tx_10: Configures Latency value of phy in egress at 10 Mbps. - - - lan8814,latency_rx_100: Configures Latency value of phy in ingress at 100 Mbps. - - - lan8814,latency_tx_100: Configures Latency value of phy in egress at 100 Mbps. - - - lan8814,latency_rx_1000: Configures Latency value of phy in ingress at 1000 Mbps. - - - lan8814,latency_tx_1000: Configures Latency value of phy in egress at 1000 Mbps. diff --git a/dts/Bindings/net/xilinx_axienet.txt b/dts/Bindings/net/xilinx_axienet.txt index b8e4894bc6..1aa4c6006c 100644 --- a/dts/Bindings/net/xilinx_axienet.txt +++ b/dts/Bindings/net/xilinx_axienet.txt @@ -26,7 +26,8 @@ Required properties: specified, the TX/RX DMA interrupts should be on that node instead, and only the Ethernet core interrupt is optionally specified here. -- phy-handle : Should point to the external phy device. +- phy-handle : Should point to the external phy device if exists. Pointing + this to the PCS/PMA PHY is deprecated and should be avoided. See ethernet.txt file in the same directory. - xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware @@ -68,6 +69,11 @@ Optional properties: required through the core's MDIO interface (i.e. always, unless the PHY is accessed through a different bus). + - pcs-handle: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X + modes, where "pcs-handle" should be used to point + to the PCS/PMA PHY, and "phy-handle" should point to an + external PHY if exists. + Example: axi_ethernet_eth: ethernet@40c00000 { compatible = "xlnx,axi-ethernet-1.00.a"; |