dts: update to v5.14-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
author: Sascha Hauer <s.hauer@pengutronix.de> 2021-08-09 21:17:51 +0200
committer: Sascha Hauer <s.hauer@pengutronix.de> 2021-08-09 21:17:51 +0200
commit: 6187b17da4b277417f34fe0b0b90bbaddcbc599e (patch)
tree: 51cbbaa0fa325c592d084eb7d197a5df0e7a43bb /dts/Bindings/net
parent: c53e1fc545e686e1f48c8efb9057fc72e158f183 (diff)
download: barebox-6187b17da4b277417f34fe0b0b90bbaddcbc599e.tar.gz
barebox-6187b17da4b277417f34fe0b0b90bbaddcbc599e.tar.xz
37 files changed, 1457 insertions, 893 deletions
diff --git a/dts/Bindings/net/amlogic,meson-dwmac.yaml b/dts/Bindings/net/amlogic,meson-dwmac.yaml
index 0467441d70..608e1d62be 100644
--- a/dts/Bindings/net/amlogic,meson-dwmac.yaml
+++ b/dts/Bindings/net/amlogic,meson-dwmac.yaml
@@ -43,7 +43,6 @@ allOf:
       properties:
         clocks:
           minItems: 3
-          maxItems: 4
           items:
             - description: GMAC main clock
             - description: First parent clock of the internal mux
@@ -52,7 +51,6 @@ allOf:
 
         clock-names:
           minItems: 3
-          maxItems: 4
           items:
             - const: stmmaceth
             - const: clkin0
diff --git a/dts/Bindings/net/brcm,bcm4908-enet.yaml b/dts/Bindings/net/brcm,bcm4908-enet.yaml
index 2f46e45dcd..a93d2f1658 100644
--- a/dts/Bindings/net/brcm,bcm4908-enet.yaml
+++ b/dts/Bindings/net/brcm,bcm4908-enet.yaml
@@ -23,14 +23,12 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: RX interrupt
       - description: TX interrupt
 
   interrupt-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: rx
       - const: tx
diff --git a/dts/Bindings/net/brcm,iproc-mdio.txt b/dts/Bindings/net/brcm,iproc-mdio.txt
deleted file mode 100644
index 8ba9ed11d7..0000000000
--- a/dts/Bindings/net/brcm,iproc-mdio.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Broadcom iProc MDIO bus controller
-
-Required properties:
-- compatible: should be "brcm,iproc-mdio"
-- reg: address and length of the register set for the MDIO interface
-- #size-cells: must be 1
-- #address-cells: must be 0
-
-Child nodes of this MDIO bus controller node are standard Ethernet PHY device
-nodes as described in Documentation/devicetree/bindings/net/phy.txt
-
-Example:
-
-mdio@18002000 {
-	compatible = "brcm,iproc-mdio";
-	reg = <0x18002000 0x8>;
-	#size-cells = <1>;
-	#address-cells = <0>;
-
-	enet-gphy@0 {
-		reg = <0>;
-	};
-};
diff --git a/dts/Bindings/net/brcm,iproc-mdio.yaml b/dts/Bindings/net/brcm,iproc-mdio.yaml
new file mode 100644
index 0000000000..3031395f7e
--- /dev/null
+++ b/dts/Bindings/net/brcm,iproc-mdio.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,iproc-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc MDIO bus controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    const: brcm,iproc-mdio
+
+  reg:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    mdio@18002000 {
+        compatible = "brcm,iproc-mdio";
+        reg = <0x18002000 0x8>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            reg = <0>;
+        };
+    };
diff --git a/dts/Bindings/net/brcm,mdio-mux-iproc.txt b/dts/Bindings/net/brcm,mdio-mux-iproc.txt
index b58843f295..deb9e852ea 100644
--- a/dts/Bindings/net/brcm,mdio-mux-iproc.txt
+++ b/dts/Bindings/net/brcm,mdio-mux-iproc.txt
@@ -17,7 +17,7 @@ Optional properties:
 - clocks: phandle of the core clock which drives the mdio block.
 
 Additional information regarding generic multiplexer properties can be found
-at- Documentation/devicetree/bindings/net/mdio-mux.txt
+at- Documentation/devicetree/bindings/net/mdio-mux.yaml
 
 
 for example:
diff --git a/dts/Bindings/net/can/bosch,m_can.yaml b/dts/Bindings/net/can/bosch,m_can.yaml
index 798fa5fb7b..f84e31348d 100644
--- a/dts/Bindings/net/can/bosch,m_can.yaml
+++ b/dts/Bindings/net/can/bosch,m_can.yaml
@@ -30,14 +30,12 @@ properties:
       - description: interrupt line0
       - description: interrupt line1
     minItems: 1
-    maxItems: 2
 
   interrupt-names:
     items:
       - const: int0
       - const: int1
     minItems: 1
-    maxItems: 2
 
   clocks:
     items:
diff --git a/dts/Bindings/net/can/c_can.txt b/dts/Bindings/net/can/c_can.txt
index 2d504256b0..366479806a 100644
--- a/dts/Bindings/net/can/c_can.txt
+++ b/dts/Bindings/net/can/c_can.txt
@@ -19,10 +19,10 @@ The following are mandatory properties for Keystone 2 66AK2G SoCs only:
 - power-domains		: Should contain a phandle to a PM domain provider node
 			  and an args specifier containing the DCAN device id
 			  value. This property is as per the binding,
-			  Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+			  Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
 - clocks		: CAN functional clock phandle. This property is as per the
 			  binding,
-			  Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+			  Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
 
 Optional properties:
 - syscon-raminit	: Handle to system control region that contains the
diff --git a/dts/Bindings/net/can/rcar_can.txt b/dts/Bindings/net/can/rcar_can.txt
deleted file mode 100644
index 90ac4fef23..0000000000
--- a/dts/Bindings/net/can/rcar_can.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Renesas R-Car CAN controller Device Tree Bindings
--------------------------------------------------
-
-Required properties:
-- compatible: "renesas,can-r8a7742" if CAN controller is a part of R8A7742 SoC.
-	      "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
-	      "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
-	      "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
-	      "renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC.
-	      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
-	      "renesas,can-r8a774b1" if CAN controller is a part of R8A774B1 SoC.
-	      "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC.
-	      "renesas,can-r8a774e1" if CAN controller is a part of R8A774E1 SoC.
-	      "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
-	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
-	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
-	      "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC.
-	      "renesas,can-r8a7792" if CAN controller is a part of R8A7792 SoC.
-	      "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC.
-	      "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
-	      "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
-	      "renesas,can-r8a7796" if CAN controller is a part of R8A77960 SoC.
-	      "renesas,can-r8a77961" if CAN controller is a part of R8A77961 SoC.
-	      "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC.
-	      "renesas,can-r8a77990" if CAN controller is a part of R8A77990 SoC.
-	      "renesas,can-r8a77995" if CAN controller is a part of R8A77995 SoC.
-	      "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
-	      "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
-	      compatible device.
-	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
-	      compatible device.
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: physical base address and size of the R-Car CAN register map.
-- interrupts: interrupt specifier for the sole interrupt.
-- clocks: phandles and clock specifiers for 3 CAN clock inputs.
-- clock-names: 3 clock input name strings: "clkp1", "clkp2", and "can_clk".
-- pinctrl-0: pin control group to be used for this controller.
-- pinctrl-names: must be "default".
-
-Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795,
-R8A77960, R8A77961, R8A77965, R8A77990, and R8A77995:
-For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
-be used by both CAN and CAN FD controller at the same time. It needs to be
-scaled to maximum frequency if any of these controllers use it. This is done
-using the below properties:
-
-- assigned-clocks: phandle of clkp2(CANFD) clock.
-- assigned-clock-rates: maximum frequency of this clock.
-
-Optional properties:
-- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
-			    <0x0> (default) : Peripheral clock (clkp1)
-			    <0x1> : Peripheral clock (clkp2)
-			    <0x3> : External input clock
-
-Example
--------
-
-SoC common .dtsi file:
-
-	can0: can@e6e80000 {
-		compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
-		reg = <0 0xe6e80000 0 0x1000>;
-		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
-			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
-		clock-names = "clkp1", "clkp2", "can_clk";
-		status = "disabled";
-	};
-
-Board specific .dts file:
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/dts/Bindings/net/can/rcar_canfd.txt b/dts/Bindings/net/can/rcar_canfd.txt
deleted file mode 100644
index 248c4ed97a..0000000000
--- a/dts/Bindings/net/can/rcar_canfd.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-Renesas R-Car CAN FD controller Device Tree Bindings
-----------------------------------------------------
-
-Required properties:
-- compatible: Must contain one or more of the following:
-  - "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers.
-  - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller.
-  - "renesas,r8a774b1-canfd" for R8A774B1 (RZ/G2N) compatible controller.
-  - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller.
-  - "renesas,r8a774e1-canfd" for R8A774E1 (RZ/G2H) compatible controller.
-  - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
-  - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
-  - "renesas,r8a77965-canfd" for R8A77965 (R-Car M3-N) compatible controller.
-  - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller.
-  - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller.
-  - "renesas,r8a77990-canfd" for R8A77990 (R-Car E3) compatible controller.
-  - "renesas,r8a77995-canfd" for R8A77995 (R-Car D3) compatible controller.
-
-  When compatible with the generic version, nodes must list the
-  SoC-specific version corresponding to the platform first, followed by the
-  family-specific and/or generic versions.
-
-- reg: physical base address and size of the R-Car CAN FD register map.
-- interrupts: interrupt specifiers for the Channel & Global interrupts
-- clocks: phandles and clock specifiers for 3 clock inputs.
-- clock-names: 3 clock input name strings: "fck", "canfd", "can_clk".
-- pinctrl-0: pin control group to be used for this controller.
-- pinctrl-names: must be "default".
-
-Required child nodes:
-The controller supports two channels and each is represented as a child node.
-The name of the child nodes are "channel0" and "channel1" respectively. Each
-child node supports the "status" property only, which is used to
-enable/disable the respective channel.
-
-Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795,
-R8A7796, R8A77965, R8A77990, and R8A77995:
-In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN
-and CAN FD controller at the same time. It needs to be scaled to maximum
-frequency if any of these controllers use it. This is done using the below
-properties:
-
-- assigned-clocks: phandle of canfd clock.
-- assigned-clock-rates: maximum frequency of this clock.
-
-Optional property:
-The controller can operate in either CAN FD only mode (default) or
-Classical CAN only mode. The mode is global to both the channels. In order to
-enable the later, define the following optional property.
- - renesas,no-can-fd: puts the controller in Classical CAN only mode.
-
-Example
--------
-
-SoC common .dtsi file:
-
-		canfd: can@e66c0000 {
-			compatible = "renesas,r8a7795-canfd",
-				     "renesas,rcar-gen3-canfd";
-			reg = <0 0xe66c0000 0 0x8000>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 914>,
-			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
-			       <&can_clk>;
-			clock-names = "fck", "canfd", "can_clk";
-			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
-			power-domains = <&cpg>;
-			status = "disabled";
-
-			channel0 {
-				status = "disabled";
-			};
-
-			channel1 {
-				status = "disabled";
-			};
-		};
-
-Board specific .dts file:
-
-E.g. below enables Channel 1 alone in the board in Classical CAN only mode.
-
-&canfd {
-	pinctrl-0 = <&canfd1_pins>;
-	pinctrl-names = "default";
-	renesas,no-can-fd;
-	status = "okay";
-
-	channel1 {
-		status = "okay";
-	};
-};
-
-E.g. below enables Channel 0 alone in the board using External clock
-as fCAN clock.
-
-&canfd {
-	pinctrl-0 = <&canfd0_pins>, <&can_clk_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	channel0 {
-		status = "okay";
-	};
-};
diff --git a/dts/Bindings/net/can/renesas,rcar-can.yaml b/dts/Bindings/net/can/renesas,rcar-can.yaml
new file mode 100644
index 0000000000..fadc871fd6
--- /dev/null
+++ b/dts/Bindings/net/can/renesas,rcar-can.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/renesas,rcar-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car CAN Controller
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,can-r8a7778      # R-Car M1-A
+              - renesas,can-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-can # R-Car Gen1
+
+      - items:
+          - enum:
+              - renesas,can-r8a7742      # RZ/G1H
+              - renesas,can-r8a7743      # RZ/G1M
+              - renesas,can-r8a7744      # RZ/G1N
+              - renesas,can-r8a7745      # RZ/G1E
+              - renesas,can-r8a77470     # RZ/G1C
+              - renesas,can-r8a7790      # R-Car H2
+              - renesas,can-r8a7791      # R-Car M2-W
+              - renesas,can-r8a7792      # R-Car V2H
+              - renesas,can-r8a7793      # R-Car M2-N
+              - renesas,can-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-can # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,can-r8a774a1     # RZ/G2M
+              - renesas,can-r8a774b1     # RZ/G2N
+              - renesas,can-r8a774c0     # RZ/G2E
+              - renesas,can-r8a774e1     # RZ/G2H
+              - renesas,can-r8a7795      # R-Car H3
+              - renesas,can-r8a7796      # R-Car M3-W
+              - renesas,can-r8a77961     # R-Car M3-W+
+              - renesas,can-r8a77965     # R-Car M3-N
+              - renesas,can-r8a77990     # R-Car E3
+              - renesas,can-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-can # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: clkp1
+      - const: clkp2
+      - const: can_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,can-clock-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 3 ]
+    default: 0
+    description: |
+      R-Car CAN Clock Source Select.  Valid values are:
+        <0x0> (default) : Peripheral clock (clkp1)
+        <0x1> : Peripheral clock (clkp2)
+        <0x3> : External input clock
+
+  assigned-clocks:
+    description:
+      Reference to the clkp2 (CANFD) clock.
+      On R-Car Gen3 and RZ/G2 SoCs, "clkp2" is the CANFD clock.  This is a div6
+      clock and can be used by both CAN and CAN FD controllers at the same
+      time.  It needs to be scaled to maximum frequency if any of these
+      controllers use it.
+
+  assigned-clock-rates:
+    description: Maximum frequency of the CANFD clock.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+allOf:
+  - $ref: can-controller.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: renesas,rcar-gen1-can
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rcar-gen3-can
+    then:
+      required:
+        - assigned-clocks
+        - assigned-clock-rates
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    can0: can@e6e80000 {
+            compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
+            reg = <0xe6e80000 0x1000>;
+            interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 916>,
+                     <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>;
+            clock-names = "clkp1", "clkp2", "can_clk";
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 916>;
+    };
diff --git a/dts/Bindings/net/can/renesas,rcar-canfd.yaml b/dts/Bindings/net/can/renesas,rcar-canfd.yaml
new file mode 100644
index 0000000000..0b33ba9ccb
--- /dev/null
+++ b/dts/Bindings/net/can/renesas,rcar-canfd.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/renesas,rcar-canfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car CAN FD Controller
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a774a1-canfd     # RZ/G2M
+              - renesas,r8a774b1-canfd     # RZ/G2N
+              - renesas,r8a774c0-canfd     # RZ/G2E
+              - renesas,r8a774e1-canfd     # RZ/G2H
+              - renesas,r8a7795-canfd      # R-Car H3
+              - renesas,r8a7796-canfd      # R-Car M3-W
+              - renesas,r8a77965-canfd     # R-Car M3-N
+              - renesas,r8a77970-canfd     # R-Car V3M
+              - renesas,r8a77980-canfd     # R-Car V3H
+              - renesas,r8a77990-canfd     # R-Car E3
+              - renesas,r8a77995-canfd     # R-Car D3
+          - const: renesas,rcar-gen3-canfd # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Channel interrupt
+      - description: Global interrupt
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: fck
+      - const: canfd
+      - const: can_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,no-can-fd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The controller can operate in either CAN FD only mode (default) or
+      Classical CAN only mode.  The mode is global to both the channels.
+      Specify this property to put the controller in Classical CAN only mode.
+
+  assigned-clocks:
+    description:
+      Reference to the CANFD clock.  The CANFD clock is a div6 clock and can be
+      used by both CAN (if present) and CAN FD controllers at the same time.
+      It needs to be scaled to maximum frequency if any of these controllers
+      use it.
+
+  assigned-clock-rates:
+    description: Maximum frequency of the CANFD clock.
+
+patternProperties:
+  "^channel[01]$":
+    type: object
+    description:
+      The controller supports two channels and each is represented as a child
+      node.  Each child node supports the "status" property only, which
+      is used to enable/disable the respective channel.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - assigned-clocks
+  - assigned-clock-rates
+  - channel0
+  - channel1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    canfd: can@e66c0000 {
+            compatible = "renesas,r8a7795-canfd",
+                         "renesas,rcar-gen3-canfd";
+            reg = <0xe66c0000 0x8000>;
+            interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 914>,
+                     <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+                     <&can_clk>;
+            clock-names = "fck", "canfd", "can_clk";
+            assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+            assigned-clock-rates = <40000000>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 914>;
+
+            channel0 {
+            };
+
+            channel1 {
+            };
+    };
diff --git a/dts/Bindings/net/dsa/brcm,sf2.yaml b/dts/Bindings/net/dsa/brcm,sf2.yaml
index d730fe5a43..d159ac78ce 100644
--- a/dts/Bindings/net/dsa/brcm,sf2.yaml
+++ b/dts/Bindings/net/dsa/brcm,sf2.yaml
@@ -48,14 +48,12 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: switch's main clock
       - description: dividing of the switch core clock
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: sw_switch
       - const: sw_switch_mdiv
diff --git a/dts/Bindings/net/dsa/mt7530.txt b/dts/Bindings/net/dsa/mt7530.txt
index de04626a8e..18247ebfc4 100644
--- a/dts/Bindings/net/dsa/mt7530.txt
+++ b/dts/Bindings/net/dsa/mt7530.txt
@@ -81,6 +81,12 @@ Optional properties:
 - gpio-controller: Boolean; if defined, MT7530's LED controller will run on
 	GPIO mode.
 - #gpio-cells: Must be 2 if gpio-controller is defined.
+- interrupt-controller: Boolean; Enables the internal interrupt controller.
+
+If interrupt-controller is defined, the following properties are required.
+
+- #interrupt-cells: Must be 1.
+- interrupts: Parent interrupt for the interrupt controller.
 
 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required, optional properties and how the integrated switch subnodes must
diff --git a/dts/Bindings/net/dsa/nxp,sja1105.yaml b/dts/Bindings/net/dsa/nxp,sja1105.yaml
new file mode 100644
index 0000000000..0b8a05dd52
--- /dev/null
+++ b/dts/Bindings/net/dsa/nxp,sja1105.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/nxp,sja1105.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP SJA1105 Automotive Ethernet Switch Family Device Tree Bindings
+
+description:
+  The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944.pdf) of at
+  least one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum
+  cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed
+  depends on the SPI bus master driver.
+
+allOf:
+  - $ref: "dsa.yaml#"
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,sja1105e
+      - nxp,sja1105t
+      - nxp,sja1105p
+      - nxp,sja1105q
+      - nxp,sja1105r
+      - nxp,sja1105s
+      - nxp,sja1110a
+      - nxp,sja1110b
+      - nxp,sja1110c
+      - nxp,sja1110d
+
+  reg:
+    maxItems: 1
+
+  # Optional container node for the 2 internal MDIO buses of the SJA1110
+  # (one for the internal 100base-T1 PHYs and the other for the single
+  # 100base-TX PHY). The "reg" property does not have physical significance.
+  # The PHY addresses to port correspondence is as follows: for 100base-T1,
+  # port 5 has PHY 1, port 6 has PHY 2 etc, while for 100base-TX, port 1 has
+  # PHY 1.
+  mdios:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^mdio@[0-1]$":
+        type: object
+
+        allOf:
+          - $ref: "http://devicetree.org/schemas/net/mdio.yaml#"
+
+        properties:
+          compatible:
+            oneOf:
+              - enum:
+                  - nxp,sja1110-base-t1-mdio
+                  - nxp,sja1110-base-tx-mdio
+
+          reg:
+            oneOf:
+              - enum:
+                - 0
+                - 1
+
+        required:
+          - compatible
+          - reg
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-switch@1 {
+                    reg = <0x1>;
+                    compatible = "nxp,sja1105t";
+
+                    ethernet-ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    phy-handle = <&rgmii_phy6>;
+                                    phy-mode = "rgmii-id";
+                                    reg = <0>;
+                            };
+
+                            port@1 {
+                                    phy-handle = <&rgmii_phy3>;
+                                    phy-mode = "rgmii-id";
+                                    reg = <1>;
+                            };
+
+                            port@2 {
+                                    phy-handle = <&rgmii_phy4>;
+                                    phy-mode = "rgmii-id";
+                                    reg = <2>;
+                            };
+
+                            port@3 {
+                                    phy-mode = "rgmii-id";
+                                    reg = <3>;
+                            };
+
+                            port@4 {
+                                    ethernet = <&enet2>;
+                                    phy-mode = "rgmii";
+                                    reg = <4>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/dts/Bindings/net/dsa/qca8k.txt b/dts/Bindings/net/dsa/qca8k.txt
index ccbc6d8932..8c73f67c43 100644
--- a/dts/Bindings/net/dsa/qca8k.txt
+++ b/dts/Bindings/net/dsa/qca8k.txt
@@ -3,6 +3,7 @@
 Required properties:
 
 - compatible: should be one of:
+    "qca,qca8327"
     "qca,qca8334"
     "qca,qca8337"
 
@@ -20,6 +21,10 @@ described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external
 mdio-bus each subnode describing a port needs to have a valid phandle
 referencing the internal PHY it is connected to. This is because there's no
 N:N mapping of port and PHY id.
+To declare the internal mdio-bus configuration, declare a mdio node in the
+switch node and declare the phandle for the port referencing the internal
+PHY is connected to. In this config a internal mdio-bus is registered and
+the mdio MASTER is used as communication.
 
 Don't use mixed external and internal mdio-bus configurations, as this is
 not supported by the hardware.
@@ -149,26 +154,61 @@ for the internal master mdio-bus configuration:
 				port@1 {
 					reg = <1>;
 					label = "lan1";
+					phy-mode = "internal";
+					phy-handle = <&phy_port1>;
 				};
 
 				port@2 {
 					reg = <2>;
 					label = "lan2";
+					phy-mode = "internal";
+					phy-handle = <&phy_port2>;
 				};
 
 				port@3 {
 					reg = <3>;
 					label = "lan3";
+					phy-mode = "internal";
+					phy-handle = <&phy_port3>;
 				};
 
 				port@4 {
 					reg = <4>;
 					label = "lan4";
+					phy-mode = "internal";
+					phy-handle = <&phy_port4>;
 				};
 
 				port@5 {
 					reg = <5>;
 					label = "wan";
+					phy-mode = "internal";
+					phy-handle = <&phy_port5>;
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port1: phy@0 {
+					reg = <0>;
+				};
+
+				phy_port2: phy@1 {
+					reg = <1>;
+				};
+
+				phy_port3: phy@2 {
+					reg = <2>;
+				};
+
+				phy_port4: phy@3 {
+					reg = <3>;
+				};
+
+				phy_port5: phy@4 {
+					reg = <4>;
 				};
 			};
 		};
diff --git a/dts/Bindings/net/dsa/sja1105.txt b/dts/Bindings/net/dsa/sja1105.txt
deleted file mode 100644
index 13fd21074d..0000000000
--- a/dts/Bindings/net/dsa/sja1105.txt
+++ /dev/null
@@ -1,156 +0,0 @@
-NXP SJA1105 switch driver
-=========================
-
-Required properties:
-
-- compatible:
-	Must be one of:
-	- "nxp,sja1105e"
-	- "nxp,sja1105t"
-	- "nxp,sja1105p"
-	- "nxp,sja1105q"
-	- "nxp,sja1105r"
-	- "nxp,sja1105s"
-
-	Although the device ID could be detected at runtime, explicit bindings
-	are required in order to be able to statically check their validity.
-	For example, SGMII can only be specified on port 4 of R and S devices,
-	and the non-SGMII devices, while pin-compatible, are not equal in terms
-	of support for RGMII internal delays (supported on P/Q/R/S, but not on
-	E/T).
-
-Optional properties:
-
-- sja1105,role-mac:
-- sja1105,role-phy:
-	Boolean properties that can be assigned under each port node. By
-	default (unless otherwise specified) a port is configured as MAC if it
-	is driving a PHY (phy-handle is present) or as PHY if it is PHY-less
-	(fixed-link specified, presumably because it is connected to a MAC).
-	The effect of this property (in either its implicit or explicit form)
-	is:
-	- In the case of MII or RMII it specifies whether the SJA1105 port is a
-	  clock source or sink for this interface (not applicable for RGMII
-	  where there is a Tx and an Rx clock).
-	- In the case of RGMII it affects the behavior regarding internal
-	  delays:
-	  1. If sja1105,role-mac is specified, and the phy-mode property is one
-	     of "rgmii-id", "rgmii-txid" or "rgmii-rxid", then the entity
-	     designated to apply the delay/clock skew necessary for RGMII
-	     is the PHY. The SJA1105 MAC does not apply any internal delays.
-	  2. If sja1105,role-phy is specified, and the phy-mode property is one
-	     of the above, the designated entity to apply the internal delays
-	     is the SJA1105 MAC (if hardware-supported). This is only supported
-	     by the second-generation (P/Q/R/S) hardware. On a first-generation
-	     E or T device, it is an error to specify an RGMII phy-mode other
-	     than "rgmii" for a port that is in fixed-link mode. In that case,
-	     the clock skew must either be added by the MAC at the other end of
-	     the fixed-link, or by PCB serpentine traces on the board.
-	These properties are required, for example, in the case where SJA1105
-	ports are at both ends of a MII/RMII PHY-less setup. One end would need
-	to have sja1105,role-mac, while the other sja1105,role-phy.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for the list of standard
-DSA required and optional properties.
-
-Other observations
-------------------
-
-The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944) of at least
-one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum
-cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed
-depends on the SPI bus master driver.
-
-Example
--------
-
-Ethernet switch connected via SPI to the host, CPU port wired to enet2:
-
-arch/arm/boot/dts/ls1021a-tsn.dts:
-
-/* SPI controller of the LS1021 */
-&dspi0 {
-	sja1105@1 {
-		reg = <0x1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nxp,sja1105t";
-		spi-max-frequency = <4000000>;
-		fsl,spi-cs-sck-delay = <1000>;
-		fsl,spi-sck-cs-delay = <1000>;
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				/* ETH5 written on chassis */
-				label = "swp5";
-				phy-handle = <&rgmii_phy6>;
-				phy-mode = "rgmii-id";
-				reg = <0>;
-				/* Implicit "sja1105,role-mac;" */
-			};
-			port@1 {
-				/* ETH2 written on chassis */
-				label = "swp2";
-				phy-handle = <&rgmii_phy3>;
-				phy-mode = "rgmii-id";
-				reg = <1>;
-				/* Implicit "sja1105,role-mac;" */
-			};
-			port@2 {
-				/* ETH3 written on chassis */
-				label = "swp3";
-				phy-handle = <&rgmii_phy4>;
-				phy-mode = "rgmii-id";
-				reg = <2>;
-				/* Implicit "sja1105,role-mac;" */
-			};
-			port@3 {
-				/* ETH4 written on chassis */
-				phy-handle = <&rgmii_phy5>;
-				label = "swp4";
-				phy-mode = "rgmii-id";
-				reg = <3>;
-				/* Implicit "sja1105,role-mac;" */
-			};
-			port@4 {
-				/* Internal port connected to eth2 */
-				ethernet = <&enet2>;
-				phy-mode = "rgmii";
-				reg = <4>;
-				/* Implicit "sja1105,role-phy;" */
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-/* MDIO controller of the LS1021 */
-&mdio0 {
-	/* BCM5464 */
-	rgmii_phy3: ethernet-phy@3 {
-		reg = <0x3>;
-	};
-	rgmii_phy4: ethernet-phy@4 {
-		reg = <0x4>;
-	};
-	rgmii_phy5: ethernet-phy@5 {
-		reg = <0x5>;
-	};
-	rgmii_phy6: ethernet-phy@6 {
-		reg = <0x6>;
-	};
-};
-
-/* Ethernet master port of the LS1021 */
-&enet2 {
-	phy-connection-type = "rgmii";
-	status = "ok";
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
diff --git a/dts/Bindings/net/ethernet-controller.yaml b/dts/Bindings/net/ethernet-controller.yaml
index e8f04687a3..b0933a8c29 100644
--- a/dts/Bindings/net/ethernet-controller.yaml
+++ b/dts/Bindings/net/ethernet-controller.yaml
@@ -68,6 +68,7 @@ properties:
       - tbi
       - rev-mii
       - rmii
+      - rev-rmii
 
       # RX and TX delays are added by the MAC when required
       - rgmii
@@ -97,6 +98,7 @@ properties:
       - 10gbase-kr
       - usxgmii
       - 10gbase-r
+      - 25gbase-r
 
   phy-mode:
     $ref: "#/properties/phy-connection-type"
diff --git a/dts/Bindings/net/ingenic,mac.yaml b/dts/Bindings/net/ingenic,mac.yaml
new file mode 100644
index 0000000000..d08a88125a
--- /dev/null
+++ b/dts/Bindings/net/ingenic,mac.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ingenic,mac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for MAC in Ingenic SoCs
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  The Ethernet Media Access Controller in Ingenic SoCs.
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4775-mac
+      - ingenic,x1000-mac
+      - ingenic,x1600-mac
+      - ingenic,x1830-mac
+      - ingenic,x2000-mac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: macirq
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: stmmaceth
+
+  mode-reg:
+    description: An extra syscon register that control ethernet interface and timing delay
+
+  rx-clk-delay-ps:
+    description: RGMII receive clock delay defined in pico seconds
+
+  tx-clk-delay-ps:
+    description: RGMII transmit clock delay defined in pico seconds
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - mode-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/x1000-cgu.h>
+
+    mac: ethernet@134b0000 {
+        compatible = "ingenic,x1000-mac";
+        reg = <0x134b0000 0x2000>;
+
+        interrupt-parent = <&intc>;
+        interrupts = <55>;
+        interrupt-names = "macirq";
+
+        clocks = <&cgu X1000_CLK_MAC>;
+        clock-names = "stmmaceth";
+
+        mode-reg = <&mac_phy_ctrl>;
+    };
+...
diff --git a/dts/Bindings/net/mdio-gpio.txt b/dts/Bindings/net/mdio-gpio.txt
deleted file mode 100644
index 4d91a36c5c..0000000000
--- a/dts/Bindings/net/mdio-gpio.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-MDIO on GPIOs
-
-Currently defined compatibles:
-- virtual,gpio-mdio
-- microchip,mdio-smi0
-
-MDC and MDIO lines connected to GPIO controllers are listed in the
-gpios property as described in section VIII.1 in the following order:
-
-MDC, MDIO.
-
-Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
-node.
-
-Example:
-
-aliases {
-	mdio-gpio0 = &mdio0;
-};
-
-mdio0: mdio {
-	compatible = "virtual,mdio-gpio";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	gpios = <&qe_pio_a 11
-		 &qe_pio_c 6>;
-};
diff --git a/dts/Bindings/net/mdio-gpio.yaml b/dts/Bindings/net/mdio-gpio.yaml
new file mode 100644
index 0000000000..1d83b8dcce
--- /dev/null
+++ b/dts/Bindings/net/mdio-gpio.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO on GPIOs
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+  - Russell King <linux@armlinux.org.uk>
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - virtual,mdio-gpio
+      - microchip,mdio-smi0
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  gpios:
+    minItems: 2
+    items:
+      - description: MDC
+      - description: MDIO
+      - description: MDO
+
+#Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+#node.
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    aliases {
+        mdio-gpio0 = &mdio0;
+    };
+
+    mdio0: mdio {
+      compatible = "virtual,mdio-gpio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      gpios = <&qe_pio_a 11>,
+              <&qe_pio_c 6>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+    };
+...
diff --git a/dts/Bindings/net/mdio-mux-gpio.txt b/dts/Bindings/net/mdio-mux-gpio.txt
deleted file mode 100644
index 694987d3c1..0000000000
--- a/dts/Bindings/net/mdio-mux-gpio.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-Properties for an MDIO bus multiplexer/switch controlled by GPIO pins.
-
-This is a special case of a MDIO bus multiplexer.  One or more GPIO
-lines are used to control which child bus is connected.
-
-Required properties in addition to the generic multiplexer properties:
-
-- compatible : mdio-mux-gpio.
-- gpios : GPIO specifiers for each GPIO line.  One or more must be specified.
-
-
-Example :
-
-	/* The parent MDIO bus. */
-	smi1: mdio@1180000001900 {
-		compatible = "cavium,octeon-3860-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x11800 0x00001900 0x0 0x40>;
-	};
-
-	/*
-	   An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a
-	   pair of GPIO lines.  Child busses 2 and 3 populated with 4
-	   PHYs each.
-	 */
-	mdio-mux {
-		compatible = "mdio-mux-gpio";
-		gpios = <&gpio1 3 0>, <&gpio1 4 0>;
-		mdio-parent-bus = <&smi1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mdio@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy11: ethernet-phy@1 {
-				reg = <1>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy12: ethernet-phy@2 {
-				reg = <2>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy13: ethernet-phy@3 {
-				reg = <3>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy14: ethernet-phy@4 {
-				reg = <4>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-		};
-
-		mdio@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy21: ethernet-phy@1 {
-				reg = <1>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy22: ethernet-phy@2 {
-				reg = <2>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy23: ethernet-phy@3 {
-				reg = <3>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy24: ethernet-phy@4 {
-				reg = <4>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-		};
-	};
diff --git a/dts/Bindings/net/mdio-mux-gpio.yaml b/dts/Bindings/net/mdio-mux-gpio.yaml
new file mode 100644
index 0000000000..71c25c4580
--- /dev/null
+++ b/dts/Bindings/net/mdio-mux-gpio.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-mux-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Properties for an MDIO bus multiplexer/switch controlled by GPIO pins.
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description:
+  This is a special case of a MDIO bus multiplexer.  One or more GPIO
+  lines are used to control which child bus is connected.
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: mdio-mux-gpio
+
+  gpios:
+    description:
+      List of GPIOs used to control the multiplexer, least significant bit first.
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /*
+     An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a
+     pair of GPIO lines.  Child busses 2 and 3 populated with 4
+     PHYs each.
+     */
+    mdio-mux {
+        compatible = "mdio-mux-gpio";
+        gpios = <&gpio1 3 0>, <&gpio1 4 0>;
+        mdio-parent-bus = <&smi1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@2 {
+            reg = <2>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@1 {
+                reg = <1>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <10 8>; /* Pin 10, active low */
+            };
+            ethernet-phy@2 {
+                reg = <2>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <10 8>; /* Pin 10, active low */
+            };
+            ethernet-phy@3 {
+                reg = <3>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <10 8>; /* Pin 10, active low */
+            };
+            ethernet-phy@4 {
+                reg = <4>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <10 8>; /* Pin 10, active low */
+            };
+        };
+
+        mdio@3 {
+            reg = <3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@1 {
+                reg = <1>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <12 8>; /* Pin 12, active low */
+            };
+            ethernet-phy@2 {
+                reg = <2>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <12 8>; /* Pin 12, active low */
+            };
+            ethernet-phy@3 {
+                reg = <3>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <12 8>; /* Pin 12, active low */
+            };
+            ethernet-phy@4 {
+                reg = <4>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <12 8>; /* Pin 12, active low */
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/net/mdio-mux-mmioreg.txt b/dts/Bindings/net/mdio-mux-mmioreg.txt
deleted file mode 100644
index 065e8bdb95..0000000000
--- a/dts/Bindings/net/mdio-mux-mmioreg.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Properties for an MDIO bus multiplexer controlled by a memory-mapped device
-
-This is a special case of a MDIO bus multiplexer.  A memory-mapped device,
-like an FPGA, is used to control which child bus is connected.  The mdio-mux
-node must be a child of the memory-mapped device.  The driver currently only
-supports devices with 8, 16 or 32-bit registers.
-
-Required properties in addition to the generic multiplexer properties:
-
-- compatible : string, must contain "mdio-mux-mmioreg"
-
-- reg : integer, contains the offset of the register that controls the bus
-	multiplexer.  The size field in the 'reg' property is the size of
-	register, and must therefore be 1, 2, or 4.
-
-- mux-mask : integer, contains an eight-bit mask that specifies which
-	bits in the register control the actual bus multiplexer.  The
-	'reg' property of each child mdio-mux node must be constrained by
-	this mask.
-
-Example:
-
-The FPGA node defines a memory-mapped FPGA with a register space of 0x30 bytes.
-For the "EMI2" MDIO bus, register 9 (BRDCFG1) controls the mux on that bus.
-A bitmask of 0x6 means that bits 1 and 2 (bit 0 is lsb) are the bits on
-BRDCFG1 that control the actual mux.
-
-	/* The FPGA node */
-	fpga: board-control@3,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
-		reg = <3 0 0x30>;
-		ranges = <0 3 0 0x30>;
-
-		mdio-mux-emi2 {
-			compatible = "mdio-mux-mmioreg", "mdio-mux";
-			mdio-parent-bus = <&xmdio0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <9 1>; // BRDCFG1
-			mux-mask = <0x6>; // EMI2
-
-			emi2_slot1: mdio@0 {	// Slot 1 XAUI (FM2)
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy_xgmii_slot1: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c45";
-					reg = <4>;
-				};
-			};
-
-			emi2_slot2: mdio@2 {	// Slot 2 XAUI (FM1)
-				reg = <2>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy_xgmii_slot2: ethernet-phy@4 {
-					compatible = "ethernet-phy-ieee802.3-c45";
-					reg = <0>;
-				};
-			};
-		};
-	};
-
-	/* The parent MDIO bus. */
-	xmdio0: mdio@f1000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,fman-xmdio";
-		reg = <0xf1000 0x1000>;
-		interrupts = <100 1 0 0>;
-	};
diff --git a/dts/Bindings/net/mdio-mux-mmioreg.yaml b/dts/Bindings/net/mdio-mux-mmioreg.yaml
new file mode 100644
index 0000000000..cf86bb0b0b
--- /dev/null
+++ b/dts/Bindings/net/mdio-mux-mmioreg.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-mux-mmioreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Properties for an MDIO bus multiplexer controlled by a memory-mapped device
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |+
+  This is a special case of a MDIO bus multiplexer.  A memory-mapped device,
+  like an FPGA, is used to control which child bus is connected.  The mdio-mux
+  node must be a child of the memory-mapped device.  The driver currently only
+  supports devices with 8, 16 or 32-bit registers.
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: mdio-mux-mmioreg
+      - const: mdio-mux
+
+  reg:
+    description: Contains the offset of the register that controls the bus
+      multiplexer. The size field in the 'reg' property is the size of register,
+      and must therefore be 1, 2, or 4.
+    maxItems: 1
+
+  mux-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Contains an eight-bit mask that specifies which bits in the
+      register control the actual bus multiplexer.  The 'reg' property of each
+      child mdio-mux node must be constrained by this mask.
+
+required:
+  - compatible
+  - reg
+  - mux-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio-mux@9 {
+        compatible = "mdio-mux-mmioreg", "mdio-mux";
+        mdio-parent-bus = <&xmdio0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <9 1>; // BRDCFG1
+        mux-mask = <0x6>; // EMI2
+
+        mdio@0 {  // Slot 1 XAUI (FM2)
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy_xgmii_slot1: ethernet-phy@4 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <4>;
+            };
+        };
+
+        mdio@2 {  // Slot 2 XAUI (FM1)
+            reg = <2>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@4 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <4>;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/net/mdio-mux-multiplexer.txt b/dts/Bindings/net/mdio-mux-multiplexer.txt
deleted file mode 100644
index 534e38058f..0000000000
--- a/dts/Bindings/net/mdio-mux-multiplexer.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Properties for an MDIO bus multiplexer consumer device
-
-This is a special case of MDIO mux  when MDIO mux is defined as a consumer
-of a mux producer device. The mux producer can be of any type like mmio mux
-producer, gpio mux producer or generic register based mux producer.
-
-Required properties in addition to the MDIO Bus multiplexer properties:
-
-- compatible : should be "mmio-mux-multiplexer"
-- mux-controls : mux controller node to use for operating the mux
-- mdio-parent-bus : phandle to the parent MDIO bus.
-
-each child node of mdio bus multiplexer consumer device represent a mdio
-bus.
-
-for more information please refer
-Documentation/devicetree/bindings/mux/mux-controller.txt
-and Documentation/devicetree/bindings/net/mdio-mux.txt
-
-Example:
-In below example the Mux producer and consumer are separate nodes.
-
-&i2c0 {
-	fpga@66 { // fpga connected to i2c
-		compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
-			     "simple-mfd";
-		reg = <0x66>;
-
-		mux: mux-controller { // Mux Producer
-			compatible = "reg-mux";
-			#mux-control-cells = <1>;
-			mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
-					<0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
-		};
-	};
-};
-
-mdio-mux-1 { // Mux consumer
-	compatible = "mdio-mux-multiplexer";
-	mux-controls = <&mux 0>;
-	mdio-parent-bus = <&emdio1>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	mdio@8 {
-		reg = <0x8>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	..
-	..
-};
-
-mdio-mux-2 { // Mux consumer
-	compatible = "mdio-mux-multiplexer";
-	mux-controls = <&mux 1>;
-	mdio-parent-bus = <&emdio2>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	mdio@1 {
-		reg = <0x1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	..
-	..
-};
diff --git a/dts/Bindings/net/mdio-mux-multiplexer.yaml b/dts/Bindings/net/mdio-mux-multiplexer.yaml
new file mode 100644
index 0000000000..282987074e
--- /dev/null
+++ b/dts/Bindings/net/mdio-mux-multiplexer.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-mux-multiplexer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Properties for an MDIO bus multiplexer consumer device
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |+
+  This is a special case of MDIO mux when MDIO mux is defined as a consumer
+  of a mux producer device. The mux producer can be of any type like mmio mux
+  producer, gpio mux producer or generic register based mux producer.
+
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: mdio-mux-multiplexer
+
+  mux-controls:
+    maxItems: 1
+
+required:
+  - compatible
+  - mux-controls
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mux: mux-controller { // Mux Producer
+        compatible = "reg-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+                        <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
+    };
+
+    mdio-mux-1 { // Mux consumer
+        compatible = "mdio-mux-multiplexer";
+        mux-controls = <&mux 0>;
+        mdio-parent-bus = <&emdio1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        mdio@8 {
+            reg = <0x8>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+    mdio-mux-2 { // Mux consumer
+        compatible = "mdio-mux-multiplexer";
+        mux-controls = <&mux 1>;
+        mdio-parent-bus = <&emdio2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        mdio@1 {
+            reg = <0x1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+...
diff --git a/dts/Bindings/net/mdio-mux.txt b/dts/Bindings/net/mdio-mux.txt
deleted file mode 100644
index f58571f365..0000000000
--- a/dts/Bindings/net/mdio-mux.txt
+++ /dev/null
@@ -1,129 +0,0 @@
-Common MDIO bus multiplexer/switch properties.
-
-An MDIO bus multiplexer/switch will have several child busses that are
-numbered uniquely in a device dependent manner.  The nodes for an MDIO
-bus multiplexer/switch will have one child node for each child bus.
-
-Required properties:
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- mdio-parent-bus : phandle to the parent MDIO bus.
-
-- Other properties specific to the multiplexer/switch hardware.
-
-Required properties for child nodes:
-- #address-cells = <1>;
-- #size-cells = <0>;
-- reg : The sub-bus number.
-
-
-Example :
-
-	/* The parent MDIO bus. */
-	smi1: mdio@1180000001900 {
-		compatible = "cavium,octeon-3860-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x11800 0x00001900 0x0 0x40>;
-	};
-
-	/*
-	   An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a
-	   pair of GPIO lines.  Child busses 2 and 3 populated with 4
-	   PHYs each.
-	 */
-	mdio-mux {
-		compatible = "mdio-mux-gpio";
-		gpios = <&gpio1 3 0>, <&gpio1 4 0>;
-		mdio-parent-bus = <&smi1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mdio@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy11: ethernet-phy@1 {
-				reg = <1>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy12: ethernet-phy@2 {
-				reg = <2>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy13: ethernet-phy@3 {
-				reg = <3>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy14: ethernet-phy@4 {
-				reg = <4>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-		};
-
-		mdio@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy21: ethernet-phy@1 {
-				reg = <1>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy22: ethernet-phy@2 {
-				reg = <2>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy23: ethernet-phy@3 {
-				reg = <3>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy24: ethernet-phy@4 {
-				reg = <4>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-		};
-	};
diff --git a/dts/Bindings/net/mdio-mux.yaml b/dts/Bindings/net/mdio-mux.yaml
new file mode 100644
index 0000000000..d169adf5d9
--- /dev/null
+++ b/dts/Bindings/net/mdio-mux.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common MDIO bus multiplexer/switch properties.
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |+
+  An MDIO bus multiplexer/switch will have several child busses that are
+  numbered uniquely in a device dependent manner.  The nodes for an MDIO
+  bus multiplexer/switch will have one child node for each child bus.
+
+properties:
+  $nodename:
+    pattern: '^mdio-mux[\-@]?'
+
+  mdio-parent-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the MDIO bus that this multiplexer's master-side port is
+      connected to.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^mdio@[0-9a-f]+$':
+    type: object
+
+    properties:
+      reg:
+        maxItems: 1
+        description: The sub-bus number.
+
+additionalProperties: true
+
+...
diff --git a/dts/Bindings/net/microchip,sparx5-switch.yaml b/dts/Bindings/net/microchip,sparx5-switch.yaml
new file mode 100644
index 0000000000..347b912a46
--- /dev/null
+++ b/dts/Bindings/net/microchip,sparx5-switch.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,sparx5-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Ethernet switch controller
+
+maintainers:
+  - Steen Hegelund <steen.hegelund@microchip.com>
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  The SparX-5 Enterprise Ethernet switch family provides a rich set of
+  Enterprise switching features such as advanced TCAM-based VLAN and
+  QoS processing enabling delivery of differentiated services, and
+  security through TCAM-based frame processing using versatile content
+  aware processor (VCAP).
+
+  IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported
+  with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K
+  IPv6 (S,G) multicast groups.
+
+  L3 security features include source guard and reverse path
+  forwarding (uRPF) tasks. Additional L3 features include VRF-Lite and
+  IP tunnels (IP over GRE/IP).
+
+  The SparX-5 switch family targets managed Layer 2 and Layer 3
+  equipment in SMB, SME, and Enterprise where high port count
+  1G/2.5G/5G/10G switching with 10G/25G aggregation links is required.
+
+properties:
+  $nodename:
+    pattern: "^switch@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,sparx5-switch
+
+  reg:
+    items:
+      - description: cpu target
+      - description: devices target
+      - description: general control block target
+
+  reg-names:
+    items:
+      - const: cpu
+      - const: devices
+      - const: gcb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: register based extraction
+      - description: frame dma based extraction
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: xtr
+      - const: fdma
+
+  resets:
+    items:
+      - description: Reset controller used for switch core reset (soft reset)
+
+  reset-names:
+    items:
+      - const: switch
+
+  mac-address: true
+
+  ethernet-ports:
+    type: object
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        type: object
+
+        properties:
+          '#address-cells':
+            const: 1
+          '#size-cells':
+            const: 0
+
+          reg:
+            description: Switch port number
+
+          phys:
+            maxItems: 1
+            description:
+              phandle of a Ethernet SerDes PHY.  This defines which SerDes
+              instance will handle the Ethernet traffic.
+
+          phy-mode:
+            description:
+              This specifies the interface used by the Ethernet SerDes towards
+              the PHY or SFP.
+
+          microchip,bandwidth:
+            description: Specifies bandwidth in Mbit/s allocated to the port.
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            maximum: 25000
+
+          phy-handle:
+            description:
+              phandle of a Ethernet PHY.  This is optional and if provided it
+              points to the cuPHY used by the Ethernet SerDes.
+
+          sfp:
+            description:
+              phandle of an SFP.  This is optional and used when not specifying
+              a cuPHY.  It points to the SFP node that describes the SFP used by
+              the Ethernet SerDes.
+
+          managed: true
+
+          microchip,sd-sgpio:
+            description:
+              Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs
+              This is optional, and only needed if the default used index is
+              is not correct.
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            minimum: 0
+            maximum: 383
+
+        required:
+          - reg
+          - phys
+          - phy-mode
+          - microchip,bandwidth
+
+        oneOf:
+          - required:
+              - phy-handle
+          - required:
+              - sfp
+              - managed
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - resets
+  - reset-names
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    switch: switch@600000000 {
+      compatible = "microchip,sparx5-switch";
+      reg =  <0 0x401000>,
+             <0x10004000 0x7fc000>,
+             <0x11010000 0xaf0000>;
+      reg-names = "cpu", "devices", "gcb";
+      interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "xtr";
+      resets = <&reset 0>;
+      reset-names = "switch";
+      ethernet-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port0: port@0 {
+          reg = <0>;
+          microchip,bandwidth = <1000>;
+          phys = <&serdes 13>;
+          phy-handle = <&phy0>;
+          phy-mode = "qsgmii";
+        };
+        /* ... */
+        /* Then the 25G interfaces */
+        port60: port@60 {
+          reg = <60>;
+          microchip,bandwidth = <25000>;
+          phys = <&serdes 29>;
+          phy-mode = "10gbase-r";
+          sfp = <&sfp_eth60>;
+          managed = "in-band-status";
+          microchip,sd-sgpio = <365>;
+        };
+        port61: port@61 {
+          reg = <61>;
+          microchip,bandwidth = <25000>;
+          phys = <&serdes 30>;
+          phy-mode = "10gbase-r";
+          sfp = <&sfp_eth61>;
+          managed = "in-band-status";
+          microchip,sd-sgpio = <369>;
+        };
+        port62: port@62 {
+          reg = <62>;
+          microchip,bandwidth = <25000>;
+          phys = <&serdes 31>;
+          phy-mode = "10gbase-r";
+          sfp = <&sfp_eth62>;
+          managed = "in-band-status";
+          microchip,sd-sgpio = <373>;
+        };
+        port63: port@63 {
+          reg = <63>;
+          microchip,bandwidth = <25000>;
+          phys = <&serdes 32>;
+          phy-mode = "10gbase-r";
+          sfp = <&sfp_eth63>;
+          managed = "in-band-status";
+          microchip,sd-sgpio = <377>;
+        };
+        /* Finally the Management interface */
+        port64: port@64 {
+          reg = <64>;
+          microchip,bandwidth = <1000>;
+          phys = <&serdes 0>;
+          phy-handle = <&phy64>;
+          phy-mode = "sgmii";
+          mac-address = [ 00 00 00 01 02 03 ];
+        };
+      };
+    };
+
+...
+#  vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :
diff --git a/dts/Bindings/net/nfc/samsung,s3fwrn5.yaml b/dts/Bindings/net/nfc/samsung,s3fwrn5.yaml
index 477066e2b8..081742c2b7 100644
--- a/dts/Bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/dts/Bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -27,6 +27,9 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   wake-gpios:
     maxItems: 1
     description:
@@ -80,6 +83,8 @@ examples:
 
             en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
             wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+
+            clocks = <&rpmcc 20>;
         };
     };
   # UART example on Raspberry Pi
diff --git a/dts/Bindings/net/qcom,ipa.yaml b/dts/Bindings/net/qcom,ipa.yaml
index 5fe6d3dceb..ed88ba4b94 100644
--- a/dts/Bindings/net/qcom,ipa.yaml
+++ b/dts/Bindings/net/qcom,ipa.yaml
@@ -44,6 +44,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,msm8998-ipa
       - qcom,sc7180-ipa
       - qcom,sc7280-ipa
       - qcom,sdm845-ipa
diff --git a/dts/Bindings/net/qualcomm-bluetooth.txt b/dts/Bindings/net/qualcomm-bluetooth.txt
deleted file mode 100644
index 709ca6d516..0000000000
--- a/dts/Bindings/net/qualcomm-bluetooth.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-Qualcomm Bluetooth Chips
----------------------
-
-This documents the binding structure and common properties for serial
-attached Qualcomm devices.
-
-Serial attached Qualcomm devices shall be a child node of the host UART
-device the slave device is attached to.
-
-Required properties:
- - compatible: should contain one of the following:
-   * "qcom,qca6174-bt"
-   * "qcom,qca9377-bt"
-   * "qcom,wcn3990-bt"
-   * "qcom,wcn3991-bt"
-   * "qcom,wcn3998-bt"
-   * "qcom,qca6390-bt"
-
-Optional properties for compatible string qcom,qca6174-bt:
-
- - enable-gpios: gpio specifier used to enable chip
- - clocks: clock provided to the controller (SUSCLK_32KHZ)
- - firmware-name: specify the name of nvm firmware to load
-
-Optional properties for compatible string qcom,qca9377-bt:
-
- - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
-
-Required properties for compatible string qcom,wcn399x-bt:
-
- - vddio-supply: VDD_IO supply regulator handle.
- - vddxo-supply: VDD_XO supply regulator handle.
- - vddrf-supply: VDD_RF supply regulator handle.
- - vddch0-supply: VDD_CH0 supply regulator handle.
-
-Optional properties for compatible string qcom,wcn399x-bt:
-
- - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
- - firmware-name: specify the name of nvm firmware to load
- - clocks: clock provided to the controller
-
-Examples:
-
-serial@7570000 {
-	label = "BT-UART";
-	status = "okay";
-
-	bluetooth {
-		compatible = "qcom,qca6174-bt";
-
-		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
-		clocks = <&divclk4>;
-		firmware-name = "nvm_00440302.bin";
-	};
-};
-
-serial@898000 {
-	bluetooth {
-		compatible = "qcom,wcn3990-bt";
-
-		vddio-supply = <&vreg_s4a_1p8>;
-		vddxo-supply = <&vreg_l7a_1p8>;
-		vddrf-supply = <&vreg_l17a_1p3>;
-		vddch0-supply = <&vreg_l25a_3p3>;
-		max-speed = <3200000>;
-		firmware-name = "crnv21.bin";
-		clocks = <&rpmhcc RPMH_RF_CLK2>;
-	};
-};
diff --git a/dts/Bindings/net/qualcomm-bluetooth.yaml b/dts/Bindings/net/qualcomm-bluetooth.yaml
new file mode 100644
index 0000000000..f93c6e7a1b
--- /dev/null
+++ b/dts/Bindings/net/qualcomm-bluetooth.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Bluetooth Chips
+
+maintainers:
+  - Balakrishna Godavarthi <bgodavar@codeaurora.org>
+  - Rocky Liao <rjliao@codeaurora.org>
+
+description:
+  This binding describes Qualcomm UART-attached bluetooth chips.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qca6174-bt
+      - qcom,qca9377-bt
+      - qcom,wcn3990-bt
+      - qcom,wcn3991-bt
+      - qcom,wcn3998-bt
+      - qcom,qca6390-bt
+      - qcom,wcn6750-bt
+
+  enable-gpios:
+    maxItems: 1
+    description: gpio specifier used to enable chip
+
+  swctrl-gpios:
+    maxItems: 1
+    description: gpio specifier is used to find status
+                 of clock supply to SoC
+
+  clocks:
+    maxItems: 1
+    description: clock provided to the controller (SUSCLK_32KHZ)
+
+  vddio-supply:
+    description: VDD_IO supply regulator handle
+
+  vddxo-supply:
+    description: VDD_XO supply regulator handle
+
+  vddrf-supply:
+    description: VDD_RF supply regulator handle
+
+  vddch0-supply:
+    description: VDD_CH0 supply regulator handle
+
+  vddaon-supply:
+    description: VDD_AON supply regulator handle
+
+  vddbtcxmx-supply:
+    description: VDD_BT_CXMX supply regulator handle
+
+  vddrfacmn-supply:
+    description: VDD_RFA_CMN supply regulator handle
+
+  vddrfa0p8-supply:
+    description: VDD_RFA_0P8 suppply regulator handle
+
+  vddrfa1p7-supply:
+    description: VDD_RFA_1P7 supply regulator handle
+
+  vddrfa1p2-supply:
+    description: VDD_RFA_1P2 supply regulator handle
+
+  vddrfa2p2-supply:
+    description: VDD_RFA_2P2 supply regulator handle
+
+  vddasd-supply:
+    description: VDD_ASD supply regulator handle
+
+  max-speed:
+    description: see Documentation/devicetree/bindings/serial/serial.yaml
+
+  firmware-name:
+    description: specify the name of nvm firmware to load
+
+  local-bd-address:
+    description: see Documentation/devicetree/bindings/net/bluetooth.txt
+
+
+required:
+  - compatible
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qca6174-bt
+    then:
+      required:
+        - enable-gpios
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn3990-bt
+              - qcom,wcn3991-bt
+              - qcom,wcn3998-bt
+    then:
+      required:
+        - vddio-supply
+        - vddxo-supply
+        - vddrf-supply
+        - vddch0-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn6750-bt
+    then:
+      required:
+        - enable-gpios
+        - swctrl-gpios
+        - vddio-supply
+        - vddaon-supply
+        - vddbtcxmx-supply
+        - vddrfacmn-supply
+        - vddrfa0p8-supply
+        - vddrfa1p7-supply
+        - vddrfa1p2-supply
+        - vddasd-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+
+        bluetooth {
+            compatible = "qcom,qca6174-bt";
+            enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+            clocks = <&divclk4>;
+            firmware-name = "nvm_00440302.bin";
+        };
+    };
+  - |
+    serial {
+
+        bluetooth {
+            compatible = "qcom,wcn3990-bt";
+            vddio-supply = <&vreg_s4a_1p8>;
+            vddxo-supply = <&vreg_l7a_1p8>;
+            vddrf-supply = <&vreg_l17a_1p3>;
+            vddch0-supply = <&vreg_l25a_3p3>;
+            max-speed = <3200000>;
+            firmware-name = "crnv21.bin";
+        };
+    };
+  - |
+    serial {
+
+        bluetooth {
+            compatible = "qcom,wcn6750-bt";
+            pinctrl-names = "default";
+            pinctrl-0 = <&bt_en_default>;
+            enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+            swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+            vddio-supply = <&vreg_l19b_1p8>;
+            vddaon-supply = <&vreg_s7b_0p9>;
+            vddbtcxmx-supply = <&vreg_s7b_0p9>;
+            vddrfacmn-supply = <&vreg_s7b_0p9>;
+            vddrfa0p8-supply = <&vreg_s7b_0p9>;
+            vddrfa1p7-supply = <&vreg_s1b_1p8>;
+            vddrfa1p2-supply = <&vreg_s8b_1p2>;
+            vddrfa2p2-supply = <&vreg_s1c_2p2>;
+            vddasd-supply = <&vreg_l11c_2p8>;
+            max-speed = <3200000>;
+            firmware-name = "msnv11.bin";
+        };
+    };
diff --git a/dts/Bindings/net/realtek,rtl82xx.yaml b/dts/Bindings/net/realtek,rtl82xx.yaml
new file mode 100644
index 0000000000..bb94a23885
--- /dev/null
+++ b/dts/Bindings/net/realtek,rtl82xx.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL82xx PHY
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+description:
+  Bindings for Realtek RTL82xx PHYs
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  realtek,clkout-disable:
+    type: boolean
+    description:
+      Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset.
+
+
+  realtek,aldps-enable:
+    type: boolean
+    description:
+      Enable ALDPS mode, ALDPS mode default is disabled after hardware reset.
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethphy1: ethernet-phy@1 {
+                reg = <1>;
+                realtek,clkout-disable;
+                realtek,aldps-enable;
+        };
+    };
diff --git a/dts/Bindings/net/rockchip-dwmac.yaml b/dts/Bindings/net/rockchip-dwmac.yaml
index 5acddb6171..083623c8d7 100644
--- a/dts/Bindings/net/rockchip-dwmac.yaml
+++ b/dts/Bindings/net/rockchip-dwmac.yaml
@@ -19,10 +19,12 @@ select:
           - rockchip,rk3128-gmac
           - rockchip,rk3228-gmac
           - rockchip,rk3288-gmac
+          - rockchip,rk3308-gmac
           - rockchip,rk3328-gmac
           - rockchip,rk3366-gmac
           - rockchip,rk3368-gmac
           - rockchip,rk3399-gmac
+          - rockchip,rk3568-gmac
           - rockchip,rv1108-gmac
   required:
     - compatible
@@ -32,17 +34,23 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - rockchip,px30-gmac
-          - rockchip,rk3128-gmac
-          - rockchip,rk3228-gmac
-          - rockchip,rk3288-gmac
-          - rockchip,rk3328-gmac
-          - rockchip,rk3366-gmac
-          - rockchip,rk3368-gmac
-          - rockchip,rk3399-gmac
-          - rockchip,rv1108-gmac
+    oneOf:
+      - items:
+          - enum:
+              - rockchip,px30-gmac
+              - rockchip,rk3128-gmac
+              - rockchip,rk3228-gmac
+              - rockchip,rk3288-gmac
+              - rockchip,rk3308-gmac
+              - rockchip,rk3328-gmac
+              - rockchip,rk3366-gmac
+              - rockchip,rk3368-gmac
+              - rockchip,rk3399-gmac
+              - rockchip,rv1108-gmac
+      - items:
+          - enum:
+              - rockchip,rk3568-gmac
+          - const: snps,dwmac-4.20a
 
   clocks:
     minItems: 5
diff --git a/dts/Bindings/net/snps,dwmac.yaml b/dts/Bindings/net/snps,dwmac.yaml
index 2edd8bea99..d7652596a0 100644
--- a/dts/Bindings/net/snps,dwmac.yaml
+++ b/dts/Bindings/net/snps,dwmac.yaml
@@ -51,11 +51,20 @@ properties:
         - allwinner,sun8i-r40-emac
         - allwinner,sun8i-v3s-emac
         - allwinner,sun50i-a64-emac
+        - loongson,ls2k-dwmac
+        - loongson,ls7a-dwmac
         - amlogic,meson6-dwmac
         - amlogic,meson8b-dwmac
         - amlogic,meson8m2-dwmac
         - amlogic,meson-gxbb-dwmac
         - amlogic,meson-axg-dwmac
+        - loongson,ls2k-dwmac
+        - loongson,ls7a-dwmac
+        - ingenic,jz4775-mac
+        - ingenic,x1000-mac
+        - ingenic,x1600-mac
+        - ingenic,x1830-mac
+        - ingenic,x2000-mac
         - rockchip,px30-gmac
         - rockchip,rk3128-gmac
         - rockchip,rk3228-gmac
@@ -82,7 +91,6 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 3
     items:
       - description: Combined signal for various interrupt events
       - description: The interrupt to manage the remote wake-up packet detection
@@ -90,7 +98,6 @@ properties:
 
   interrupt-names:
     minItems: 1
-    maxItems: 3
     items:
       - const: macirq
       - const: eth_wake_irq
@@ -310,6 +317,11 @@ allOf:
               - allwinner,sun8i-r40-emac
               - allwinner,sun8i-v3s-emac
               - allwinner,sun50i-a64-emac
+              - ingenic,jz4775-mac
+              - ingenic,x1000-mac
+              - ingenic,x1600-mac
+              - ingenic,x1830-mac
+              - ingenic,x2000-mac
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac
@@ -353,6 +365,13 @@ allOf:
               - allwinner,sun8i-r40-emac
               - allwinner,sun8i-v3s-emac
               - allwinner,sun50i-a64-emac
+              - loongson,ls2k-dwmac
+              - loongson,ls7a-dwmac
+              - ingenic,jz4775-mac
+              - ingenic,x1000-mac
+              - ingenic,x1600-mac
+              - ingenic,x1830-mac
+              - ingenic,x2000-mac
               - snps,dwmac-4.00
               - snps,dwmac-4.10a
               - snps,dwmac-4.20a
diff --git a/dts/Bindings/net/stm32-dwmac.yaml b/dts/Bindings/net/stm32-dwmac.yaml
index 27eb606679..d3f05d5934 100644
--- a/dts/Bindings/net/stm32-dwmac.yaml
+++ b/dts/Bindings/net/stm32-dwmac.yaml
@@ -46,17 +46,17 @@ properties:
 
   clocks:
     minItems: 3
-    maxItems: 5
     items:
       - description: GMAC main clock
       - description: MAC TX clock
       - description: MAC RX clock
       - description: For MPU family, used for power mode
       - description: For MPU family, used for PHY without quartz
+      - description: PTP clock
 
   clock-names:
     minItems: 3
-    maxItems: 5
+    maxItems: 6
     contains:
       enum:
         - stmmaceth
@@ -64,6 +64,7 @@ properties:
         - mac-clk-rx
         - ethstp
         - eth-ck
+        - ptp_ref
 
   st,syscon:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
author	Sascha Hauer <s.hauer@pengutronix.de>	2021-08-09 21:17:51 +0200
committer	Sascha Hauer <s.hauer@pengutronix.de>	2021-08-09 21:17:51 +0200
commit	6187b17da4b277417f34fe0b0b90bbaddcbc599e (patch)
tree	51cbbaa0fa325c592d084eb7d197a5df0e7a43bb /dts/Bindings/net
parent	c53e1fc545e686e1f48c8efb9057fc72e158f183 (diff)
download	barebox-6187b17da4b277417f34fe0b0b90bbaddcbc599e.tar.gz barebox-6187b17da4b277417f34fe0b0b90bbaddcbc599e.tar.xz