dts: update to v5.3-rc2

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 1 insertions, 80 deletions

diff --git a/dts/Bindings/nvmem/nvmem.txt b/dts/Bindings/nvmem/nvmem.txt
index fd06c09b82..46a7ef485e 100644
--- a/dts/Bindings/nvmem/nvmem.txt
+++ b/dts/Bindings/nvmem/nvmem.txt
@@ -1,80 +1 @@
-= NVMEM(Non Volatile Memory) Data Device Tree Bindings =
-
-This binding is intended to represent the location of hardware
-configuration data stored in NVMEMs like eeprom, efuses and so on.
-
-On a significant proportion of boards, the manufacturer has stored
-some data on NVMEM, for the OS to be able to retrieve these information
-and act upon it. Obviously, the OS has to know about where to retrieve
-these data from, and where they are stored on the storage device.
-
-This document is here to document this.
-
-= Data providers =
-Contains bindings specific to provider drivers and data cells as children
-of this node.
-
-Optional properties:
- read-only: Mark the provider as read only.
-
-= Data cells =
-These are the child nodes of the provider which contain data cell
-information like offset and size in nvmem provider.
-
-Required properties:
-reg:	specifies the offset in byte within the storage device.
-
-Optional properties:
-
-bits:	Is pair of bit location and number of bits, which specifies offset
-	in bit and number of bits within the address range specified by reg property.
-	Offset takes values from 0-7.
-
-For example:
-
-	/* Provider */
-	qfprom: qfprom@700000 {
-		...
-
-		/* Data cells */
-		tsens_calibration: calib@404 {
-			reg = <0x404 0x10>;
-		};
-
-		tsens_calibration_bckp: calib_bckp@504 {
-			reg = <0x504 0x11>;
-			bits = <6 128>
-		};
-
-		pvs_version: pvs-version@6 {
-			reg = <0x6 0x2>
-			bits = <7 2>
-		};
-
-		speed_bin: speed-bin@c{
-			reg = <0xc 0x1>;
-			bits = <2 3>;
-
-		};
-		...
-	};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells/providers.
-
-Required-properties:
-nvmem-cells: list of phandle to the nvmem data cells.
-nvmem-cell-names: names for the each nvmem-cells specified. Required if
-	nvmem-cells is used.
-
-Optional-properties:
-nvmem	: list of phandles to nvmem providers.
-nvmem-names: names for the each nvmem provider. required if nvmem is used.
-
-For example:
-
-	tsens {
-		...
-		nvmem-cells = <&tsens_calibration>;
-		nvmem-cell-names = "calibration";
-	};
+This file has been moved to nvmem.yaml and nvmem-consumer.yaml.