summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/pci
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2017-11-28 11:02:14 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2017-11-28 11:06:44 +0100
commit2e9cce8fb1f577088e2b20ae2f461130e13ad190 (patch)
treef82ae53e88d36e07608be1b3159da296ed025ef1 /dts/Bindings/pci
parentc68d466d263827692aa809e6b34abb90a1cab515 (diff)
downloadbarebox-2e9cce8fb1f577088e2b20ae2f461130e13ad190.tar.gz
dts: update to v4.15-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/pci')
-rw-r--r--dts/Bindings/pci/designware-pcie-ecam.txt42
-rw-r--r--dts/Bindings/pci/hisilicon-histb-pcie.txt68
-rw-r--r--dts/Bindings/pci/layerscape-pci.txt1
-rw-r--r--dts/Bindings/pci/nvidia,tegra20-pcie.txt146
-rw-r--r--dts/Bindings/pci/pci-rcar-gen2.txt10
-rw-r--r--dts/Bindings/pci/v3-v360epc-pci.txt75
6 files changed, 319 insertions, 23 deletions
diff --git a/dts/Bindings/pci/designware-pcie-ecam.txt b/dts/Bindings/pci/designware-pcie-ecam.txt
new file mode 100644
index 0000000..515b2f9
--- /dev/null
+++ b/dts/Bindings/pci/designware-pcie-ecam.txt
@@ -0,0 +1,42 @@
+* Synopsys DesignWare PCIe root complex in ECAM shift mode
+
+In some cases, firmware may already have configured the Synopsys DesignWare
+PCIe controller in RC mode with static ATU window mappings that cover all
+config, MMIO and I/O spaces in a [mostly] ECAM compatible fashion.
+In this case, there is no need for the OS to perform any low level setup
+of clocks, PHYs or device registers, nor is there any reason for the driver
+to reconfigure ATU windows for config and/or IO space accesses at runtime.
+
+In cases where the IP was synthesized with a minimum ATU window size of
+64 KB, it cannot be supported by the generic ECAM driver, because it
+requires special config space accessors that filter accesses to device #1
+and beyond on the first bus.
+
+Required properties:
+- compatible: "marvell,armada8k-pcie-ecam" or
+ "socionext,synquacer-pcie-ecam" or
+ "snps,dw-pcie-ecam" (must be preceded by a more specific match)
+
+Please refer to the binding document of "pci-host-ecam-generic" in the
+file host-generic-pci.txt for a description of the remaining required
+and optional properties.
+
+Example:
+
+ pcie1: pcie@7f000000 {
+ compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam";
+ device_type = "pci";
+ reg = <0x0 0x7f000000 0x0 0xf00000>;
+ bus-range = <0x0 0xe>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x1000000 0x00 0x00010000 0x00 0x7ff00000 0x0 0x00010000>,
+ <0x2000000 0x00 0x70000000 0x00 0x70000000 0x0 0x0f000000>,
+ <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>;
+
+ #interrupt-cells = <0x1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 0x0 182 0x4>;
+ msi-map = <0x0 &its 0x0 0x10000>;
+ dma-coherent;
+ };
diff --git a/dts/Bindings/pci/hisilicon-histb-pcie.txt b/dts/Bindings/pci/hisilicon-histb-pcie.txt
new file mode 100644
index 0000000..c84bc02
--- /dev/null
+++ b/dts/Bindings/pci/hisilicon-histb-pcie.txt
@@ -0,0 +1,68 @@
+HiSilicon STB PCIe host bridge DT description
+
+The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core.
+It shares common functions with the DesignWare PCIe core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/designware-pcie.txt.
+
+Additional properties are described here:
+
+Required properties
+- compatible: Should be one of the following strings:
+ "hisilicon,hi3798cv200-pcie"
+- reg: Should contain sysctl, rc_dbi, config registers location and length.
+- reg-names: Must include the following entries:
+ "control": control registers of PCIe controller;
+ "rc-dbi": configuration space of PCIe controller;
+ "config": configuration transaction space of PCIe controller.
+- bus-range: PCI bus numbers covered.
+- interrupts: MSI interrupt.
+- interrupt-names: Must include "msi" entries.
+- clocks: List of phandle and clock specifier pairs as listed in clock-names
+ property.
+- clock-name: Must include the following entries:
+ "aux": auxiliary gate clock;
+ "pipe": pipe gate clock;
+ "sys": sys gate clock;
+ "bus": bus gate clock.
+- resets: List of phandle and reset specifier pairs as listed in reset-names
+ property.
+- reset-names: Must include the following entries:
+ "soft": soft reset;
+ "sys": sys reset;
+ "bus": bus reset.
+
+Optional properties:
+- reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal.
+- phys: List of phandle and phy mode specifier, should be 0.
+- phy-names: Must be "phy".
+
+Example:
+ pcie@f9860000 {
+ compatible = "hisilicon,hi3798cv200-pcie";
+ reg = <0xf9860000 0x1000>,
+ <0xf0000000 0x2000>,
+ <0xf2000000 0x01000000>;
+ reg-names = "control", "rc-dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0 15>;
+ num-lanes = <1>;
+ ranges=<0x81000000 0 0 0xf4000000 0 0x00010000
+ 0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg PCIE_AUX_CLK>,
+ <&crg PCIE_PIPE_CLK>,
+ <&crg PCIE_SYS_CLK>,
+ <&crg PCIE_BUS_CLK>;
+ clock-names = "aux", "pipe", "sys", "bus";
+ resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
+ reset-names = "soft", "sys", "bus";
+ phys = <&combphy1 PHY_TYPE_PCIE>;
+ phy-names = "phy";
+ };
diff --git a/dts/Bindings/pci/layerscape-pci.txt b/dts/Bindings/pci/layerscape-pci.txt
index c0484da..66df1e8 100644
--- a/dts/Bindings/pci/layerscape-pci.txt
+++ b/dts/Bindings/pci/layerscape-pci.txt
@@ -18,6 +18,7 @@ Required properties:
"fsl,ls2088a-pcie"
"fsl,ls1088a-pcie"
"fsl,ls1046a-pcie"
+ "fsl,ls1012a-pcie"
- reg: base addresses and lengths of the PCIe controller register blocks.
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
diff --git a/dts/Bindings/pci/nvidia,tegra20-pcie.txt b/dts/Bindings/pci/nvidia,tegra20-pcie.txt
index 982a74e..145a4f0 100644
--- a/dts/Bindings/pci/nvidia,tegra20-pcie.txt
+++ b/dts/Bindings/pci/nvidia,tegra20-pcie.txt
@@ -1,10 +1,15 @@
NVIDIA Tegra PCIe controller
Required properties:
-- compatible: For Tegra20, must contain "nvidia,tegra20-pcie". For Tegra30,
- "nvidia,tegra30-pcie". For Tegra124, must contain "nvidia,tegra124-pcie".
- Otherwise, must contain "nvidia,<chip>-pcie", plus one of the above, where
- <chip> is tegra132 or tegra210.
+- compatible: Must be:
+ - "nvidia,tegra20-pcie": for Tegra20
+ - "nvidia,tegra30-pcie": for Tegra30
+ - "nvidia,tegra124-pcie": for Tegra124 and Tegra132
+ - "nvidia,tegra210-pcie": for Tegra210
+ - "nvidia,tegra186-pcie": for Tegra186
+- power-domains: To ungate power partition by BPMP powergate driver. Must
+ contain BPMP phandle and PCIe power partition ID. This is required only
+ for Tegra186.
- device_type: Must be "pci"
- reg: A list of physical base address and length for each set of controller
registers. Must contain an entry for each entry in the reg-names property.
@@ -124,6 +129,16 @@ Power supplies for Tegra210:
- vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
supply 1.8 V.
+Power supplies for Tegra186:
+- Required:
+ - dvdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+ - hvdd-pex-pll-supply: High-voltage supply for PLLE (shared with USB3). Must
+ supply 1.8 V.
+ - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+ Must supply 1.8 V.
+ - vddio-pexctl-aud-supply: Power supply for PCIe side band signals. Must
+ supply 1.8 V.
+
Root ports are defined as subnodes of the PCIe controller node.
Required properties:
@@ -255,7 +270,7 @@ Tegra30:
SoC DTSI:
- pcie-controller@00003000 {
+ pcie-controller@3000 {
compatible = "nvidia,tegra30-pcie";
device_type = "pci";
reg = <0x00003000 0x00000800 /* PADS registers */
@@ -334,7 +349,7 @@ SoC DTSI:
Board DTS:
- pcie-controller@00003000 {
+ pcie-controller@3000 {
status = "okay";
avdd-pexa-supply = <&ldo1_reg>;
@@ -360,7 +375,7 @@ Tegra124:
SoC DTSI:
- pcie-controller@01003000 {
+ pcie-controller@1003000 {
compatible = "nvidia,tegra124-pcie";
device_type = "pci";
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
@@ -425,7 +440,7 @@ SoC DTSI:
Board DTS:
- pcie-controller@01003000 {
+ pcie-controller@1003000 {
status = "okay";
avddio-pex-supply = <&vdd_1v05_run>;
@@ -456,7 +471,7 @@ Tegra210:
SoC DTSI:
- pcie-controller@01003000 {
+ pcie-controller@1003000 {
compatible = "nvidia,tegra210-pcie";
device_type = "pci";
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
@@ -521,7 +536,7 @@ SoC DTSI:
Board DTS:
- pcie-controller@01003000 {
+ pcie-controller@1003000 {
status = "okay";
avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
@@ -546,3 +561,114 @@ Board DTS:
status = "okay";
};
};
+
+Tegra186:
+---------
+
+SoC DTSI:
+
+ pcie@10003000 {
+ compatible = "nvidia,tegra186-pcie";
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
+ device_type = "pci";
+ reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */
+ 0x0 0x10003800 0x0 0x00000800 /* AFI registers */
+ 0x0 0x40000000 0x0 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */
+ 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */
+ 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */
+ 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */
+ 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */
+ 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
+
+ clocks = <&bpmp TEGRA186_CLK_AFI>,
+ <&bpmp TEGRA186_CLK_PCIE>,
+ <&bpmp TEGRA186_CLK_PLLE>;
+ clock-names = "afi", "pex", "pll_e";
+
+ resets = <&bpmp TEGRA186_RESET_AFI>,
+ <&bpmp TEGRA186_RESET_PCIE>,
+ <&bpmp TEGRA186_RESET_PCIEXCLK>;
+ reset-names = "afi", "pex", "pcie_x";
+
+ status = "disabled";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <1>;
+ };
+
+ pci@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>;
+ reg = <0x001800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <1>;
+ };
+ };
+
+Board DTS:
+
+ pcie@10003000 {
+ status = "okay";
+
+ dvdd-pex-supply = <&vdd_pex>;
+ hvdd-pex-pll-supply = <&vdd_1v8>;
+ hvdd-pex-supply = <&vdd_1v8>;
+ vddio-pexctl-aud-supply = <&vdd_1v8>;
+
+ pci@1,0 {
+ nvidia,num-lanes = <4>;
+ status = "okay";
+ };
+
+ pci@2,0 {
+ nvidia,num-lanes = <0>;
+ status = "disabled";
+ };
+
+ pci@3,0 {
+ nvidia,num-lanes = <1>;
+ status = "disabled";
+ };
+ };
diff --git a/dts/Bindings/pci/pci-rcar-gen2.txt b/dts/Bindings/pci/pci-rcar-gen2.txt
index 3d03863..9fe7e12 100644
--- a/dts/Bindings/pci/pci-rcar-gen2.txt
+++ b/dts/Bindings/pci/pci-rcar-gen2.txt
@@ -60,17 +60,15 @@ Example SoC configuration:
0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
- pci@0,1 {
+ usb@1,0 {
reg = <0x800 0 0 0 0>;
- device_type = "pci";
- phys = <&usbphy 0 0>;
+ phys = <&usb0 0>;
phy-names = "usb";
};
- pci@0,2 {
+ usb@2,0 {
reg = <0x1000 0 0 0 0>;
- device_type = "pci";
- phys = <&usbphy 0 0>;
+ phys = <&usb0 0>;
phy-names = "usb";
};
};
diff --git a/dts/Bindings/pci/v3-v360epc-pci.txt b/dts/Bindings/pci/v3-v360epc-pci.txt
index 30b364e..1106329 100644
--- a/dts/Bindings/pci/v3-v360epc-pci.txt
+++ b/dts/Bindings/pci/v3-v360epc-pci.txt
@@ -2,14 +2,75 @@ V3 Semiconductor V360 EPC PCI bridge
This bridge is found in the ARM Integrator/AP (Application Platform)
-Integrator-specific notes:
+Required properties:
+- compatible: should be one of:
+ "v3,v360epc-pci"
+ "arm,integrator-ap-pci", "v3,v360epc-pci"
+- reg: should contain two register areas:
+ first the base address of the V3 host bridge controller, 64KB
+ second the configuration area register space, 16MB
+- interrupts: should contain a reference to the V3 error interrupt
+ as routed on the system.
+- bus-range: see pci.txt
+- ranges: this follows the standard PCI bindings in the IEEE Std
+ 1275-1994 (see pci.txt) with the following restriction:
+ - The non-prefetchable and prefetchable memory windows must
+ each be exactly 256MB (0x10000000) in size.
+ - The prefetchable memory window must be immediately adjacent
+ to the non-prefetcable memory window
+- dma-ranges: three ranges for the inbound memory region. The ranges must
+ be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB,
+ 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked
+ as pre-fetchable. Two ranges are supported by the hardware.
-- syscon: should contain a link to the syscon device node (since
+Integrator-specific required properties:
+- syscon: should contain a link to the syscon device node, since
on the Integrator, some registers in the syscon are required to
- operate the V3).
+ operate the V3 host bridge.
-V360 EPC specific notes:
+Example:
-- reg: should contain the base address of the V3 adapter.
-- interrupts: should contain a reference to the V3 error interrupt
- as routed on the system.
+pci: pciv3@62000000 {
+ compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>; /* Bus error IRQ */
+ clocks = <&pciclk>;
+ bus-range = <0x00 0xff>;
+ ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */
+ 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */
+ 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
+ 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
+ 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
+ 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
+ dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
+ 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
+ 0x02000000 0 0x80000000 /* Core module alias memory */
+ 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <
+ /* IDSEL 9 */
+ 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
+ 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
+ 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
+ 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+ /* IDSEL 10 */
+ 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
+ 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
+ 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
+ 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+ /* IDSEL 11 */
+ 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
+ 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
+ 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
+ 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+ /* IDSEL 12 */
+ 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
+ 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
+ 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
+ 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+ >;
+};