dts: update to v5.14-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

10 files changed, 297 insertions, 121 deletions

diff --git a/dts/Bindings/pci/brcm,stb-pcie.yaml b/dts/Bindings/pci/brcm,stb-pcie.yaml
index f90557f6de..b9589a0daa 100644
--- a/dts/Bindings/pci/brcm,stb-pcie.yaml
+++ b/dts/Bindings/pci/brcm,stb-pcie.yaml
@@ -25,14 +25,12 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: PCIe host controller
       - description: builtin MSI controller
 
   interrupt-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: pcie
       - const: msi
diff --git a/dts/Bindings/pci/fsl,imx6q-pcie.txt b/dts/Bindings/pci/fsl,imx6q-pcie.txt
index de4b2baf91..d8971ab992 100644
--- a/dts/Bindings/pci/fsl,imx6q-pcie.txt
+++ b/dts/Bindings/pci/fsl,imx6q-pcie.txt
@@ -38,6 +38,9 @@ Optional properties:
   The regulator will be enabled when initializing the PCIe host and
   disabled either as part of the init process or when shutting down the
   host.
+- vph-supply: Should specify the regulator in charge of VPH one of the three
+  PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v voltage
+  supplies.
 
 Additional required properties for imx6sx-pcie:
 - clock names: Must include the following additional entries:
diff --git a/dts/Bindings/pci/intel,ixp4xx-pci.yaml b/dts/Bindings/pci/intel,ixp4xx-pci.yaml
new file mode 100644
index 0000000000..debfb54a80
--- /dev/null
+++ b/dts/Bindings/pci/intel,ixp4xx-pci.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,ixp4xx-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx PCI controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: PCI host controller found in the Intel IXP4xx SoC series.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - intel,ixp42x-pci
+          - intel,ixp43x-pci
+    description: The two supported variants are ixp42x and ixp43x,
+      though more variants may exist.
+
+  reg:
+    items:
+      - description: IXP4xx-specific registers
+
+  interrupts:
+    items:
+      - description: Main PCI interrupt
+      - description: PCI DMA interrupt 1
+      - description: PCI DMA interrupt 2
+
+  ranges:
+    maxItems: 2
+    description: Typically one memory range of 64MB and one IO
+      space range of 64KB.
+
+  dma-ranges:
+    maxItems: 1
+    description: The DMA range tells the PCI host which addresses
+      the RAM is at. It can map only 64MB so if the RAM is bigger
+      than 64MB the DMA access has to be restricted to these
+      addresses.
+
+  "#interrupt-cells": true
+
+  interrupt-map: true
+
+  interrupt-map-mask:
+    items:
+      - const: 0xf800
+      - const: 0
+      - const: 0
+      - const: 7
+
+required:
+  - compatible
+  - reg
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pci@c0000000 {
+      compatible = "intel,ixp43x-pci";
+      reg = <0xc0000000 0x1000>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      device_type = "pci";
+      bus-range = <0x00 0xff>;
+
+      ranges =
+        <0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+        <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+      dma-ranges =
+        <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0xf800 0 0 7>;
+      interrupt-map =
+        <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+        <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+        <0x0800 0 0 3 &gpio0 9  3>, /* INT C on slot 1 is irq 9 */
+        <0x0800 0 0 4 &gpio0 8  3>, /* INT D on slot 1 is irq 8 */
+        <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+        <0x1000 0 0 2 &gpio0 9  3>, /* INT B on slot 2 is irq 9 */
+        <0x1000 0 0 3 &gpio0 8  3>, /* INT C on slot 2 is irq 8 */
+        <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+        <0x1800 0 0 1 &gpio0 9  3>, /* INT A on slot 3 is irq 9 */
+        <0x1800 0 0 2 &gpio0 8  3>, /* INT B on slot 3 is irq 8 */
+        <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
+        <0x1800 0 0 4 &gpio0 10 3>; /* INT D on slot 3 is irq 10 */
+    };
diff --git a/dts/Bindings/pci/loongson.yaml b/dts/Bindings/pci/loongson.yaml
index 81bae060cb..82bc6c486c 100644
--- a/dts/Bindings/pci/loongson.yaml
+++ b/dts/Bindings/pci/loongson.yaml
@@ -24,7 +24,6 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 2
     items:
       - description: CFG0 standard config space register
       - description: CFG1 extended config space register
diff --git a/dts/Bindings/pci/mediatek-pcie-gen3.yaml b/dts/Bindings/pci/mediatek-pcie-gen3.yaml
index e7b1f9892d..742206dbd9 100644
--- a/dts/Bindings/pci/mediatek-pcie-gen3.yaml
+++ b/dts/Bindings/pci/mediatek-pcie-gen3.yaml
@@ -70,7 +70,6 @@ properties:
 
   reset-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: phy
       - const: mac
diff --git a/dts/Bindings/pci/microchip,pcie-host.yaml b/dts/Bindings/pci/microchip,pcie-host.yaml
index 04251d71f5..fb95c276a9 100644
--- a/dts/Bindings/pci/microchip,pcie-host.yaml
+++ b/dts/Bindings/pci/microchip,pcie-host.yaml
@@ -26,14 +26,12 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: PCIe host controller
       - description: builtin MSI controller
 
   interrupt-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: pcie
       - const: msi
diff --git a/dts/Bindings/pci/pci-keystone.txt b/dts/Bindings/pci/pci-keystone.txt
deleted file mode 100644
index 47202a2938..0000000000
--- a/dts/Bindings/pci/pci-keystone.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-TI Keystone PCIe interface
-
-Keystone PCI host Controller is based on the Synopsys DesignWare PCI
-hardware version 3.65.  It shares common functions with the PCIe DesignWare
-core driver and inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt
-
-Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt
-for the details of DesignWare DT bindings.  Additional properties are
-described here as well as properties that are not applicable.
-
-Required Properties:-
-
-compatibility: Should be "ti,keystone-pcie" for RC on Keystone2 SoC
-	       Should be "ti,am654-pcie-rc" for RC on AM654x SoC
-reg: Three register ranges as listed in the reg-names property
-reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
-	   TI specific application registers, "config" for the
-	   configuration space address
-
-pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
-	interrupt-cells: should be set to 1
-	interrupts: GIC interrupt lines connected to PCI MSI interrupt lines
-	(required if the compatible is "ti,keystone-pcie")
-msi-map: As specified in Documentation/devicetree/bindings/pci/pci-msi.txt
-	 (required if the compatible is "ti,am654-pcie-rc".
-
-ti,syscon-pcie-id : phandle to the device control module required to set device
-		    id and vendor id.
-ti,syscon-pcie-mode : phandle to the device control module required to configure
-		      PCI in either RC mode or EP mode.
-
- Example:
-	pcie_msi_intc: msi-interrupt-controller {
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
-	};
-
-pcie_intc: Interrupt controller device node for Legacy IRQ chip
-	interrupt-cells: should be set to 1
-
- Example:
-	pcie_intc: legacy-interrupt-controller {
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
-	};
-
-Optional properties:-
-	phys: phandle to generic Keystone SerDes PHY for PCI
-	phy-names: name of the generic Keystone SerDes PHY for PCI
-	  - If boot loader already does PCI link establishment, then phys and
-	    phy-names shouldn't be present.
-	interrupts: platform interrupt for error interrupts.
-
-DesignWare DT Properties not applicable for Keystone PCI
-
-1. pcie_bus clock-names not used.  Instead, a phandle to phys is used.
-
-AM654 PCIe Endpoint
-===================
-
-Required Properties:-
-
-compatibility: Should be "ti,am654-pcie-ep" for EP on AM654x SoC
-reg: Four register ranges as listed in the reg-names property
-reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
-	   TI specific application registers, "atu" for the
-	   Address Translation Unit configuration registers and
-	   "addr_space" used to map remote RC address space
-num-ib-windows: As specified in
-		Documentation/devicetree/bindings/pci/designware-pcie.txt
-num-ob-windows: As specified in
-		Documentation/devicetree/bindings/pci/designware-pcie.txt
-num-lanes: As specified in
-	   Documentation/devicetree/bindings/pci/designware-pcie.txt
-power-domains: As documented by the generic PM domain bindings in
-	       Documentation/devicetree/bindings/power/power_domain.txt.
-ti,syscon-pcie-mode: phandle to the device control module required to configure
-		      PCI in either RC mode or EP mode.
-
-Optional properties:-
-
-phys: list of PHY specifiers (used by generic PHY framework)
-phy-names: must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
-               number of lanes as specified in *num-lanes* property.
-("phys" and "phy-names" DT bindings are specified in
-Documentation/devicetree/bindings/phy/phy-bindings.txt)
-interrupts: platform interrupt for error interrupts.
-
-pcie-ep {
-	compatible = "ti,am654-pcie-ep";
-	reg =  <0x5500000 0x1000>, <0x5501000 0x1000>,
-	       <0x10000000 0x8000000>, <0x5506000 0x1000>;
-	reg-names = "app", "dbics", "addr_space", "atu";
-	power-domains = <&k3_pds 120>;
-	ti,syscon-pcie-mode = <&pcie0_mode>;
-	num-lanes = <1>;
-	num-ib-windows = <16>;
-	num-ob-windows = <16>;
-	interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
-};
diff --git a/dts/Bindings/pci/qcom,pcie.txt b/dts/Bindings/pci/qcom,pcie.txt
index 0da458a051..25f4def468 100644
--- a/dts/Bindings/pci/qcom,pcie.txt
+++ b/dts/Bindings/pci/qcom,pcie.txt
@@ -14,6 +14,7 @@
 			- "qcom,pcie-qcs404" for qcs404
 			- "qcom,pcie-sdm845" for sdm845
 			- "qcom,pcie-sm8250" for sm8250
+			- "qcom,pcie-ipq6018" for ipq6018
 
 - reg:
 	Usage: required
@@ -124,6 +125,16 @@
 			- "aux"		Auxiliary clock
 
 - clock-names:
+	Usage: required for ipq6018
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "iface"	PCIe to SysNOC BIU clock
+			- "axi_m"	AXI Master clock
+			- "axi_s"	AXI Slave clock
+			- "axi_bridge"	AXI bridge clock
+			- "rchng"
+
+- clock-names:
 	Usage: required for qcs404
 	Value type: <stringlist>
 	Definition: Should contain the following entries
@@ -210,6 +221,19 @@
 			- "axi_m_sticky"	AXI Master Sticky reset
 
 - reset-names:
+	Usage: required for ipq6018
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "pipe"		PIPE reset
+			- "sleep"		Sleep reset
+			- "sticky"		Core Sticky reset
+			- "axi_m"		AXI Master reset
+			- "axi_s"		AXI Slave reset
+			- "ahb"			AHB Reset
+			- "axi_m_sticky"	AXI Master Sticky reset
+			- "axi_s_sticky"	AXI Slave Sticky reset
+
+- reset-names:
 	Usage: required for qcs404
 	Value type: <stringlist>
 	Definition: Should contain the following entries
diff --git a/dts/Bindings/pci/ti,am65-pci-ep.yaml b/dts/Bindings/pci/ti,am65-pci-ep.yaml
new file mode 100644
index 0000000000..78c217d362
--- /dev/null
+++ b/dts/Bindings/pci/ti,am65-pci-ep.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,am65-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM65 PCI Endpoint
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: pci-ep.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am654-pcie-ep
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: app
+      - const: dbics
+      - const: addr_space
+      - const: atu
+
+  power-domains:
+    maxItems: 1
+
+  ti,syscon-pcie-mode:
+    description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  interrupts:
+    minItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - max-link-speed
+  - power-domains
+  - ti,syscon-pcie-mode
+  - dma-coherent
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    pcie0_ep: pcie-ep@5500000 {
+        compatible = "ti,am654-pcie-ep";
+        reg =  <0x5500000 0x1000>,
+               <0x5501000 0x1000>,
+               <0x10000000 0x8000000>,
+               <0x5506000 0x1000>;
+        reg-names = "app", "dbics", "addr_space", "atu";
+        power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+        ti,syscon-pcie-mode = <&pcie0_mode>;
+        num-ib-windows = <16>;
+        num-ob-windows = <16>;
+        max-link-speed = <2>;
+        dma-coherent;
+        interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+    };
diff --git a/dts/Bindings/pci/ti,am65-pci-host.yaml b/dts/Bindings/pci/ti,am65-pci-host.yaml
new file mode 100644
index 0000000000..834dc1c174
--- /dev/null
+++ b/dts/Bindings/pci/ti,am65-pci-host.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,am65-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM65 PCI Host
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am654-pcie-rc
+      - ti,keystone-pcie
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: app
+      - const: dbics
+      - const: config
+      - const: atu
+
+  power-domains:
+    maxItems: 1
+
+  ti,syscon-pcie-id:
+    description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,syscon-pcie-mode:
+    description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  msi-map: true
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - max-link-speed
+  - ti,syscon-pcie-id
+  - ti,syscon-pcie-mode
+  - ranges
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,am654-pcie-rc
+then:
+  required:
+    - dma-coherent
+    - power-domains
+    - msi-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    pcie0_rc: pcie@5500000 {
+        compatible = "ti,am654-pcie-rc";
+        reg =  <0x5500000 0x1000>,
+               <0x5501000 0x1000>,
+               <0x10000000 0x2000>,
+               <0x5506000 0x1000>;
+        reg-names = "app", "dbics", "config", "atu";
+        power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x81000000 0 0          0x10020000 0 0x00010000>,
+                 <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>;
+        ti,syscon-pcie-id = <&pcie_devid>;
+        ti,syscon-pcie-mode = <&pcie0_mode>;
+        bus-range = <0x0 0xff>;
+        num-viewport = <16>;
+        max-link-speed = <2>;
+        dma-coherent;
+        interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+        msi-map = <0x0 &gic_its 0x0 0x10000>;
+        device_type = "pci";
+    };