dts: update to v4.6-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

7 files changed, 195 insertions, 4 deletions

diff --git a/dts/Bindings/pci/designware-pcie.txt b/dts/Bindings/pci/designware-pcie.txt
index 5b0853df9d..64f2fff121 100644
--- a/dts/Bindings/pci/designware-pcie.txt
+++ b/dts/Bindings/pci/designware-pcie.txt
@@ -28,3 +28,20 @@ Optional properties:
 - clock-names: Must include the following entries:
 	- "pcie"
 	- "pcie_bus"
+
+Example configuration:
+
+	pcie: pcie@0xdffff000 {
+		compatible = "snps,dw-pcie";
+		reg = <0xdffff000 0x1000>, /* Controller registers */
+		      <0xd0000000 0x2000>; /* PCI config space */
+		reg-names = "ctrlreg", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000
+			  0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+		interrupts = <25>, <24>;
+		#interrupt-cells = <1>;
+		num-lanes = <1>;
+	};
diff --git a/dts/Bindings/pci/fsl,imx6q-pcie.txt b/dts/Bindings/pci/fsl,imx6q-pcie.txt
index 6fbba53a30..3be80c6894 100644
--- a/dts/Bindings/pci/fsl,imx6q-pcie.txt
+++ b/dts/Bindings/pci/fsl,imx6q-pcie.txt
@@ -13,6 +13,13 @@ Required properties:
 - clock-names: Must include the following additional entries:
 	- "pcie_phy"
 
+Optional properties:
+- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0
+- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0
+- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20
+- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127
+- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127
+
 Example:
 
 	pcie@0x01000000 {
diff --git a/dts/Bindings/pci/layerscape-pci.txt b/dts/Bindings/pci/layerscape-pci.txt
index e3767857d3..ef683b2fd2 100644
--- a/dts/Bindings/pci/layerscape-pci.txt
+++ b/dts/Bindings/pci/layerscape-pci.txt
@@ -14,7 +14,7 @@ information.
 Required properties:
 - compatible: should contain the platform identifier such as:
         "fsl,ls1021a-pcie", "snps,dw-pcie"
-        "fsl,ls2080a-pcie", "snps,dw-pcie"
+        "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
 - reg: base addresses and lengths of the PCIe controller
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
diff --git a/dts/Bindings/pci/pci-thunder-ecam.txt b/dts/Bindings/pci/pci-thunder-ecam.txt
new file mode 100644
index 0000000000..f478874b79
--- /dev/null
+++ b/dts/Bindings/pci/pci-thunder-ecam.txt
@@ -0,0 +1,30 @@
+* ThunderX PCI host controller for pass-1.x silicon
+
+Firmware-initialized PCI host controller to on-chip devices found on
+some Cavium ThunderX processors.  These devices have ECAM-based config
+access, but the BARs are all at fixed addresses.  We handle the fixed
+addresses by synthesizing Enhanced Allocation (EA) capabilities for
+these devices.
+
+The properties and their meanings are identical to those described in
+host-generic-pci.txt except as listed below.
+
+Properties of the host controller node that differ from
+host-generic-pci.txt:
+
+- compatible     : Must be "cavium,pci-host-thunder-ecam"
+
+Example:
+
+	pcie@84b000000000 {
+		compatible = "cavium,pci-host-thunder-ecam";
+		device_type = "pci";
+		msi-parent = <&its>;
+		msi-map = <0 &its 0x30000 0x10000>;
+		bus-range = <0 31>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		#stream-id-cells = <1>;
+		reg = <0x84b0 0x00000000 0 0x02000000>;  /* Configuration space */
+		ranges = <0x03000000 0x8180 0x00000000 0x8180 0x00000000 0x80 0x00000000>; /* mem ranges */
+	};
diff --git a/dts/Bindings/pci/pci-thunder-pem.txt b/dts/Bindings/pci/pci-thunder-pem.txt
new file mode 100644
index 0000000000..f131faea3b
--- /dev/null
+++ b/dts/Bindings/pci/pci-thunder-pem.txt
@@ -0,0 +1,43 @@
+* ThunderX PEM PCIe host controller
+
+Firmware-initialized PCI host controller found on some Cavium
+ThunderX processors.
+
+The properties and their meanings are identical to those described in
+host-generic-pci.txt except as listed below.
+
+Properties of the host controller node that differ from
+host-generic-pci.txt:
+
+- compatible     : Must be "cavium,pci-host-thunder-pem"
+
+- reg            : Two entries: First the configuration space for down
+                   stream devices base address and size, as accessed
+                   from the parent bus. Second, the register bank of
+                   the PEM device PCIe bridge.
+
+Example:
+
+    pci@87e0,c2000000 {
+	compatible = "cavium,pci-host-thunder-pem";
+	device_type = "pci";
+	msi-parent = <&its>;
+	msi-map = <0 &its 0x10000 0x10000>;
+	bus-range = <0x8f 0xc7>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+
+	reg = <0x8880 0x8f000000 0x0 0x39000000>,  /* Configuration space */
+	      <0x87e0 0xc2000000 0x0 0x00010000>; /* PEM space */
+	ranges = <0x01000000 0x00 0x00020000 0x88b0 0x00020000 0x00 0x00010000>, /* I/O */
+		 <0x03000000 0x00 0x10000000 0x8890 0x10000000 0x0f 0xf0000000>, /* mem64 */
+		 <0x43000000 0x10 0x00000000 0x88a0 0x00000000 0x10 0x00000000>, /* mem64-pref */
+		 <0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */
+
+	#interrupt-cells = <1>;
+	interrupt-map-mask = <0 0 0 7>;
+	interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
+			<0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
+			<0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
+			<0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
+    };
diff --git a/dts/Bindings/pci/xilinx-nwl-pcie.txt b/dts/Bindings/pci/xilinx-nwl-pcie.txt
new file mode 100644
index 0000000000..337fc97d18
--- /dev/null
+++ b/dts/Bindings/pci/xilinx-nwl-pcie.txt
@@ -0,0 +1,68 @@
+* Xilinx NWL PCIe Root Port Bridge DT description
+
+Required properties:
+- compatible: Should contain "xlnx,nwl-pcie-2.11"
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- reg: Should contain Bridge, PCIe Controller registers location,
+	configuration space, and length
+- reg-names: Must include the following entries:
+	"breg": bridge registers
+	"pcireg": PCIe controller registers
+	"cfg": configuration space region
+- device_type: must be "pci"
+- interrupts: Should contain NWL PCIe interrupt
+- interrupt-names: Must include the following entries:
+	"msi1, msi0": interrupt asserted when MSI is received
+	"intx": interrupt asserted when a legacy interrupt is received
+	"misc": interrupt asserted when miscellaneous is received
+- interrupt-map-mask and interrupt-map: standard PCI properties to define the
+	mapping of the PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+	supported by hardware)
+	Please refer to the standard PCI bus binding document for a more
+	detailed explanation
+- msi-controller: indicates that this is MSI controller node
+- msi-parent:  MSI parent of the root complex itself
+- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts
+	- interrupt-controller: identifies the node as an interrupt controller
+	- #interrupt-cells: should be set to 1
+	- #address-cells: specifies the number of cells needed to encode an
+		address. The value must be 0.
+
+
+Example:
+++++++++
+
+nwl_pcie: pcie@fd0e0000 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+	compatible = "xlnx,nwl-pcie-2.11";
+	#interrupt-cells = <1>;
+	msi-controller;
+	device_type = "pci";
+	interrupt-parent = <&gic>;
+	interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
+	interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
+	interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+	interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+			<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+			<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+			<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+
+	msi-parent = <&nwl_pcie>;
+	reg = <0x0 0xfd0e0000 0x0 0x1000>,
+	      <0x0 0xfd480000 0x0 0x1000>,
+	      <0x0 0xe0000000 0x0 0x1000000>;
+	reg-names = "breg", "pcireg", "cfg";
+	ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>;
+
+	pcie_intc: legacy-interrupt-controller {
+		interrupt-controller;
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+	};
+
+};
diff --git a/dts/Bindings/pci/xilinx-pcie.txt b/dts/Bindings/pci/xilinx-pcie.txt
index 02f979a48a..fd57a81180 100644
--- a/dts/Bindings/pci/xilinx-pcie.txt
+++ b/dts/Bindings/pci/xilinx-pcie.txt
@@ -17,7 +17,7 @@ Required properties:
 	Please refer to the standard PCI bus binding document for a more
 	detailed explanation
 
-Optional properties:
+Optional properties for Zynq/Microblaze:
 - bus-range: PCI bus numbers covered
 
 Interrupt controller child node
@@ -38,13 +38,13 @@ the four INTx interrupts in ISR and route them to this domain.
 
 Example:
 ++++++++
-
+Zynq:
 	pci_express: axi-pcie@50000000 {
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
 		compatible = "xlnx,axi-pcie-host-1.00.a";
-		reg = < 0x50000000 0x10000000 >;
+		reg = < 0x50000000 0x1000000 >;
 		device_type = "pci";
 		interrupts = < 0 52 4 >;
 		interrupt-map-mask = <0 0 0 7>;
@@ -60,3 +60,29 @@ Example:
 			#interrupt-cells = <1>;
 		};
 	};
+
+
+Microblaze:
+	pci_express: axi-pcie@10000000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		compatible = "xlnx,axi-pcie-host-1.00.a";
+		reg = <0x10000000 0x4000000>;
+		device_type = "pci";
+		interrupt-parent = <&microblaze_0_intc>;
+		interrupts = <1 2>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
+
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+
+	};