diff options
| author | Sascha Hauer <s.hauer@pengutronix.de> | 2018-05-08 08:14:56 +0200 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2018-05-08 08:14:56 +0200 |
| commit | 6b85c20d46812bdbc062b863261c3e5100e30556 (patch) | |
| tree | e067c9889eaf55d5e793b05a14000276f2669e9f /dts/Bindings/phy/phy-mapphone-mdm6600.txt | |
| parent | 9d8c00bdf7c1e8b614a797f0a15fa45bf6387224 (diff) | |
| download | barebox-6b85c20d46812bdbc062b863261c3e5100e30556.tar.gz barebox-6b85c20d46812bdbc062b863261c3e5100e30556.tar.xz | |
dts: update to v4.17-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/phy/phy-mapphone-mdm6600.txt')
| -rw-r--r-- | dts/Bindings/phy/phy-mapphone-mdm6600.txt | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/dts/Bindings/phy/phy-mapphone-mdm6600.txt b/dts/Bindings/phy/phy-mapphone-mdm6600.txt new file mode 100644 index 0000000000..29427d4f04 --- /dev/null +++ b/dts/Bindings/phy/phy-mapphone-mdm6600.txt @@ -0,0 +1,29 @@ +Device tree binding documentation for Motorola Mapphone MDM6600 USB PHY + +Required properties: +- compatible Must be "motorola,mapphone-mdm6600" +- enable-gpios GPIO to enable the USB PHY +- power-gpios GPIO to power on the device +- reset-gpios GPIO to reset the device +- motorola,mode-gpios Two GPIOs to configure MDM6600 USB start-up mode for + normal mode versus USB flashing mode +- motorola,cmd-gpios Three GPIOs to control the power state of the MDM6600 +- motorola,status-gpios Three GPIOs to read the power state of the MDM6600 + +Example: + +usb-phy { + compatible = "motorola,mapphone-mdm6600"; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, + <&gpio5 21 GPIO_ACTIVE_HIGH>; + motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, + <&gpio4 8 GPIO_ACTIVE_HIGH>, + <&gpio5 14 GPIO_ACTIVE_HIGH>; + motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, + <&gpio2 21 GPIO_ACTIVE_HIGH>, + <&gpio2 23 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; +}; |