diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2015-12-08 07:35:17 +0100 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2015-12-10 08:48:40 +0100 |
commit | 6e6d9a2ff045f09d5a03e876becea5e6a1dabe90 (patch) | |
tree | bcf5e71df4472e374d03cc15ca22b4f841d9c73d /dts/Bindings/phy/phy-mt65xx-usb.txt | |
parent | 8e2fd5380a4fd7cee428513dc8eab068912b49f1 (diff) | |
download | barebox-6e6d9a2ff045f09d5a03e876becea5e6a1dabe90.tar.gz barebox-6e6d9a2ff045f09d5a03e876becea5e6a1dabe90.tar.xz |
dts: update to v4.4-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/phy/phy-mt65xx-usb.txt')
-rw-r--r-- | dts/Bindings/phy/phy-mt65xx-usb.txt | 68 |
1 files changed, 68 insertions, 0 deletions
diff --git a/dts/Bindings/phy/phy-mt65xx-usb.txt b/dts/Bindings/phy/phy-mt65xx-usb.txt new file mode 100644 index 0000000000..00100cf3e0 --- /dev/null +++ b/dts/Bindings/phy/phy-mt65xx-usb.txt @@ -0,0 +1,68 @@ +mt65xx USB3.0 PHY binding +-------------------------- + +This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC. + +Required properties (controller (parent) node): + - compatible : should be "mediatek,mt8173-u3phy" + - reg : offset and length of register for phy, exclude port's + register. + - clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names + - clock-names : must contain + "u3phya_ref": for reference clock of usb3.0 analog phy. + +Required nodes : a sub-node is required for each port the controller + provides. Address range information including the usual + 'reg' property is used inside these nodes to describe + the controller's topology. + +Required properties (port (child) node): +- reg : address and length of the register set for the port. +- #phy-cells : should be 1 (See second example) + cell after port phandle is phy type from: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + +Example: + +u3phy: usb-phy@11290000 { + compatible = "mediatek,mt8173-u3phy"; + reg = <0 0x11290000 0 0x800>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "u3phya_ref"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "okay"; + + phy_port0: port@11290800 { + reg = <0 0x11290800 0 0x800>; + #phy-cells = <1>; + status = "okay"; + }; + + phy_port1: port@11291000 { + reg = <0 0x11291000 0 0x800>; + #phy-cells = <1>; + status = "okay"; + }; +}; + +Specifying phy control of devices +--------------------------------- + +Device nodes should specify the configuration required in their "phys" +property, containing a phandle to the phy port node and a device type; +phy-names for each port are optional. + +Example: + +#include <dt-bindings/phy/phy.h> + +usb30: usb@11270000 { + ... + phys = <&phy_port0 PHY_TYPE_USB3>; + phy-names = "usb3-0"; + ... +}; |