dts: update to v4.6-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 4 insertions, 11 deletions

diff --git a/dts/Bindings/phy/rcar-gen3-phy-usb2.txt b/dts/Bindings/phy/rcar-gen3-phy-usb2.txt
index 2390e4e9c8..eaf7e9b7ce 100644
--- a/dts/Bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/dts/Bindings/phy/rcar-gen3-phy-usb2.txt
@@ -7,33 +7,26 @@ Required properties:
 - compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
 	      SoC.
 - reg: offset and length of the partial USB 2.0 Host register block.
-- reg-names: must be "usb2_host".
 - clocks: clock phandle and specifier pair(s).
 - #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
 
 Optional properties:
 To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
-combined, the device tree node should set HSUSB properties to reg and reg-names
-properties. This is because HSUSB has registers to select USB 2.0 host or
-peripheral at that channel:
-- reg: offset and length of the partial HSUSB register block.
-- reg-names: must be "hsusb".
+combined, the device tree node should set interrupt properties to use the
+channel as USB OTG:
 - interrupts: interrupt specifier for the PHY.
 
 Example (R-Car H3):
 
 	usb-phy@ee080200 {
 		compatible = "renesas,usb2-phy-r8a7795";
-		reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>;
-		reg-names = "usb2_host", "hsusb";
+		reg = <0 0xee080200 0 0x700>;
 		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>,
-			 <&mstp7_clks R8A7795_CLK_HSUSB>;
+		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
 	};
 
 	usb-phy@ee0a0200 {
 		compatible = "renesas,usb2-phy-r8a7795";
 		reg = <0 0xee0a0200 0 0x700>;
-		reg-names = "usb2_host";
 		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
 	};