dts: update to v4.1-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

5 files changed, 68 insertions, 5 deletions

diff --git a/dts/Bindings/phy/bcm-phy.txt b/dts/Bindings/phy/brcm,kona-usb2-phy.txt
index 3dc8b3d2ff..3dc8b3d2ff 100644
--- a/dts/Bindings/phy/bcm-phy.txt
+++ b/dts/Bindings/phy/brcm,kona-usb2-phy.txt
diff --git a/dts/Bindings/phy/dm816x-phy.txt b/dts/Bindings/phy/dm816x-phy.txt
new file mode 100644
index 0000000000..2fe3d11d06
--- /dev/null
+++ b/dts/Bindings/phy/dm816x-phy.txt
@@ -0,0 +1,24 @@
+Device tree binding documentation for am816x USB PHY
+=========================
+
+Required properties:
+- compatible : should be "ti,dm816x-usb-phy"
+- reg : offset and length of the PHY register set.
+- reg-names : name for the phy registers
+- clocks : phandle to the clock
+- clock-names : name of the clock
+- syscon: phandle for the syscon node to access misc registers
+- #phy-cells : from the generic PHY bindings, must be 1
+- syscon: phandle for the syscon node to access misc registers
+
+Example:
+
+usb_phy0: usb-phy@20 {
+	compatible = "ti,dm8168-usb-phy";
+	reg = <0x20 0x8>;
+	reg-names = "phy";
+	clocks = <&main_fapll 6>;
+	clock-names = "refclk";
+	#phy-cells = <0>;
+	syscon = <&scm_conf>;
+};
diff --git a/dts/Bindings/phy/phy-miphy365x.txt b/dts/Bindings/phy/phy-miphy365x.txt
index 9802d5d911..8772900e05 100644
--- a/dts/Bindings/phy/phy-miphy365x.txt
+++ b/dts/Bindings/phy/phy-miphy365x.txt
@@ -20,8 +20,8 @@ Required nodes	:  A sub-node is required for each channel the controller
 Required properties (port (child) node):
 - #phy-cells 	: Should be 1 (See second example)
 		  Cell after port phandle is device type from:
-			- MIPHY_TYPE_SATA
-			- MIPHY_TYPE_PCI
+			- PHY_TYPE_SATA
+			- PHY_TYPE_PCI
 - reg        	: Address and length of register sets for each device in
 		  "reg-names"
 - reg-names     : The names of the register addresses corresponding to the
@@ -68,10 +68,10 @@ property, containing a phandle to the phy port node and a device type.
 
 Example:
 
-#include <dt-bindings/phy/phy-miphy365x.h>
+#include <dt-bindings/phy/phy.h>
 
 	sata0: sata@fe380000 {
 		...
-		phys	  = <&phy_port0 MIPHY_TYPE_SATA>;
+		phys	  = <&phy_port0 PHY_TYPE_SATA>;
 		...
 	};
diff --git a/dts/Bindings/phy/samsung-phy.txt b/dts/Bindings/phy/samsung-phy.txt
index 91e38cfe1f..60c6f2a633 100644
--- a/dts/Bindings/phy/samsung-phy.txt
+++ b/dts/Bindings/phy/samsung-phy.txt
@@ -128,6 +128,7 @@ Required properties:
 - compatible : Should be set to one of the following supported values:
 	- "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC,
 	- "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC.
+	- "samsung,exynos5433-usbdrd-phy" - for exynos5433 SoC.
 	- "samsung,exynos7-usbdrd-phy" - for exynos7 SoC.
 - reg : Register offset and length of USB DRD PHY register set;
 - clocks: Clock IDs array as required by the controller
@@ -139,7 +140,7 @@ Required properties:
 	       PHY operations, associated by phy name. It is used to
 	       determine bit values for clock settings register.
 	       For Exynos5420 this is given as 'sclk_usbphy30' in CMU.
-	- optional clocks: Exynos7 SoC has now following additional
+	- optional clocks: Exynos5433 & Exynos7 SoC has now following additional
 			   gate clocks available:
 			   - phy_pipe: for PIPE3 phy
 			   - phy_utmi: for UTMI+ phy
diff --git a/dts/Bindings/phy/sun9i-usb-phy.txt b/dts/Bindings/phy/sun9i-usb-phy.txt
new file mode 100644
index 0000000000..1cca85c709
--- /dev/null
+++ b/dts/Bindings/phy/sun9i-usb-phy.txt
@@ -0,0 +1,38 @@
+Allwinner sun9i USB PHY
+-----------------------
+
+Required properties:
+- compatible : should be one of
+  * allwinner,sun9i-a80-usb-phy
+- reg : a list of offset + length pairs
+- #phy-cells : from the generic phy bindings, must be 0
+- phy_type : "hsic" for HSIC usage;
+	     other values or absence of this property indicates normal USB
+- clocks : phandle + clock specifier for the phy clocks
+- clock-names : depending on the "phy_type" property,
+  * "phy" for normal USB
+  * "hsic_480M", "hsic_12M" for HSIC
+- resets : a list of phandle + reset specifier pairs
+- reset-names : depending on the "phy_type" property,
+  * "phy" for normal USB
+  * "hsic" for HSIC
+
+Optional Properties:
+- phy-supply : from the generic phy bindings, a phandle to a regulator that
+	       provides power to VBUS.
+
+It is recommended to list all clocks and resets available.
+The driver will only use those matching the phy_type.
+
+Example:
+	usbphy1: phy@00a01800 {
+		compatible = "allwinner,sun9i-a80-usb-phy";
+		reg = <0x00a01800 0x4>;
+		clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+		       <&usb_phy_clk 3>;
+		clock-names = "hsic_480M", "hsic_12M", "phy";
+		resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+		reset-names = "hsic", "phy";
+		status = "disabled";
+		#phy-cells = <0>;
+	};