dts: update to v4.2-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 88 insertions, 0 deletions

diff --git a/dts/Bindings/phy/brcm,brcmstb-sata-phy.txt b/dts/Bindings/phy/brcm,brcmstb-sata-phy.txt
new file mode 100644
index 0000000000..7f81ef9014
--- /dev/null
+++ b/dts/Bindings/phy/brcm,brcmstb-sata-phy.txt
@@ -0,0 +1,40 @@
+* Broadcom SATA3 PHY for STB
+
+Required properties:
+- compatible: should be one or more of
+     "brcm,bcm7445-sata-phy"
+     "brcm,phy-sata3"
+- address-cells: should be 1
+- size-cells: should be 0
+- reg: register range for the PHY PCB interface
+- reg-names: should be "phy"
+
+Sub-nodes:
+  Each port's PHY should be represented as a sub-node.
+
+Sub-nodes required properties:
+- reg: the PHY number
+- phy-cells: generic PHY binding; must be 0
+Optional:
+- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
+
+
+Example:
+
+	sata-phy@f0458100 {
+		compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+		reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
+		reg-names = "phy";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata-phy@0 {
+			reg = <0>;
+			#phy-cells = <0>;
+		};
+
+		sata-phy@1 {
+			reg = <1>;
+			#phy-cells = <0>;
+		};
+	};
diff --git a/dts/Bindings/phy/pistachio-usb-phy.txt b/dts/Bindings/phy/pistachio-usb-phy.txt
new file mode 100644
index 0000000000..afbc7e24a3
--- /dev/null
+++ b/dts/Bindings/phy/pistachio-usb-phy.txt
@@ -0,0 +1,29 @@
+IMG Pistachio USB PHY
+=====================
+
+Required properties:
+--------------------
+ - compatible: Must be "img,pistachio-usb-phy".
+ - #phy-cells: Must be 0.  See ./phy-bindings.txt for details.
+ - clocks: Must contain an entry for each entry in clock-names.
+   See ../clock/clock-bindings.txt for details.
+ - clock-names: Must include "usb_phy".
+ - img,cr-top: Must constain a phandle to the CR_TOP syscon node.
+ - img,refclk: Indicates the reference clock source for the USB PHY.
+   See <dt-bindings/phy/phy-pistachio-usb.h> for a list of valid values.
+
+Optional properties:
+--------------------
+ - phy-supply: USB VBUS supply.  Must supply 5.0V.
+
+Example:
+--------
+usb_phy: usb-phy {
+	compatible = "img,pistachio-usb-phy";
+	clocks = <&clk_core CLK_USB_PHY>;
+	clock-names = "usb_phy";
+	phy-supply = <&usb_vbus>;
+	img,refclk = <REFCLK_CLK_CORE>;
+	img,cr-top = <&cr_top>;
+	#phy-cells = <0>;
+};
diff --git a/dts/Bindings/phy/pxa1928-usb-phy.txt b/dts/Bindings/phy/pxa1928-usb-phy.txt
new file mode 100644
index 0000000000..660a13ca90
--- /dev/null
+++ b/dts/Bindings/phy/pxa1928-usb-phy.txt
@@ -0,0 +1,18 @@
+* Marvell PXA1928 USB and HSIC PHYs
+
+Required properties:
+- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy"
+- reg: base address and length of the registers
+- clocks - A single clock. From common clock binding.
+- #phys-cells: should be 0. From commmon phy binding.
+- resets: reference to the reset controller
+
+Example:
+
+	usbphy: phy@7000 {
+		compatible = "marvell,pxa1928-usb-phy";
+		reg = <0x7000 0xe0>;
+		clocks = <&apmu_clocks PXA1928_CLK_USB>;
+		#phy-cells = <0>;
+	};
+
diff --git a/dts/Bindings/phy/rcar-gen2-phy.txt b/dts/Bindings/phy/rcar-gen2-phy.txt
index 00fc52a034..d564ba4f1c 100644
--- a/dts/Bindings/phy/rcar-gen2-phy.txt
+++ b/dts/Bindings/phy/rcar-gen2-phy.txt
@@ -6,6 +6,7 @@ This file provides information on what the device node for the R-Car generation
 Required properties:
 - compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
 	      "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
+	      "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
 - reg: offset and length of the register block.
 - #address-cells: number of address cells for the USB channel subnodes, must
 		  be <1>.